SpeakerCraft SC-DX-EC6-DT in-Ceiling Dual-Tweeter Speaker User Manual

SpeakerCraft SC-DX-EC6-DT in-Ceiling Dual-Tweeter Speaker

STAGE E SERIES

Enjoy a pleasant atmosphere throughout the home with natural ambient sound.

Single Stereo Design

Featuring a 6 ½” polypropylene cone woofer, dual voice coils, and ½” Mylar tweeters, the DX-EC6-DT In-Ceiling Speaker is ideal for audio applications where a single speaker is needed to deliver stereo sound with reliable and consistent performance.

Features

• 6 1/2” Polypropylene Woofer
  Low Crossover points and a poly woofer that’s mounted as close to the surface as possible deliver reliable and consistent performance.

• Dual 1/2” Mylar Dome Tweeters
  Mylar dome tweeters reduce the severity of break-up modes resulting in smooth highs which are pleasing to the ear.

• Low Profile Grill
  A thin-bezel magnetic grille ensures a secure fit, and pleasing aesthetic—and with a one-step paint process, blends discreetly into any decor.

• Easy-Grip Tweeter Bridge
  Installing speakers above your head requires a sturdy grip point and the SpeakerCraft Tweeter bridge ensures you have one. We even protect the tweeter from accidental finger pokes.

• Precision Tooled Diffusion Baffle
  Scattered concavities reduce reflection and disperse the sound evenly for a natural room-filling experience.

• Secure Connection
  All SpeakerCraft speakers feature spring-loaded binding posts that provide a secure, worry-free connection in the wall or ceiling.

• Timbre and Performance Matched
  Expect consistent dynamic and detailed sound in every Stage E series speaker.

Specifications

• Woofer Size: 6.5” (160mm)
• Woofer Construction: Polypropylene Cone
• Tweeter Dual: 1/2” (13mm) Fixed Mylar Dome
• Frequency Response: 52Hz-20kHz
• Impedance: 8 Ohms
• Power Handling: 100 Watts
• Sensitivity: 89 db
• Timbre: Timbre-Matched to all E-Series Speakers
• Dimensions:
  • 9.625” (210mm) Diameter
  • 3.8” (97mm) Depth
• Hole Cutout Dimensions: 8-1/4” (210mm) Diameter
• Depth Behind Wall: 3.7” (94mm)

Niceforyou.com

©2023 Nice North America LLC. SpeakerCraft is a registered trademark of Nice North America LLC. All rights reserved.

Use Pre-Construction Bracket

• Model #: EL-PCB-IC-6
• Rev A – 06/2023

CONNECTIONS

The following is a general description of how you should connect the SpeakerCraft SC-DX-EC6-DT in-Ceiling Dual-Tweeter Speaker:

• The wiring:
  Each in-ceiling speaker manufactured by SpeakerCraft will be equipped with two sets of speaker wire terminals; one set will be dedicated to each tweeter. A positive (+) connector and a negative (-) connector are standard components of every terminal.

• Amplifier and Receiving Device:
  It is necessary to connect the speaker wires that come from each tweeter connector of the in-ceiling speaker to the appropriate terminals on either your amplifier or your receiver. Make sure that the polarity is matched up correctly by connecting the positive (+) terminal of the speaker to the positive (+) terminal of the amplifier and the negative (-) terminal of the speaker to the negative (-) terminal of the amplifier.

• Connection to Stereo or Mono Sound:
  If you want stereo sound from your in-ceiling speakers, you may need to connect each tweeter of the speakers to a separate channel on the amplifier or receiver. This depends on how your system is set up. You also have the option of “bridging” the tweeters and connecting them to a single channel in order to produce monophonic sound.

• Topping out:
  Install the in-ceiling speaker in your ceiling in the chosen spot in a careful and precise manner. Always make sure you install and position components in accordance with the manufacturer’s instructions.

• Achieving a Balanced Volume:
  Because the SpeakerCraft SC-DX-EC6-DT contains two separate tweeters, it is possible that the volume balance between the tweeters will need to be adjusted in order to produce the best possible sound quality. In many cases, this can be accomplished by adjusting the settings on your amplifier or receiver.

• The test is:
  After the speakers have been connected and installed, you should test them using a variety of different audio sources to validate that they are delivering the sound you anticipate. Check to see that both of the tweeters are functioning well and that they are balanced appropriately.

PRECAUTIONS

• Learn from the Guide:
  Before installing or making use of the in-ceiling speaker, it is imperative that the user handbook and installation guide provided by SpeakerCraft be thoroughly read and comprehended.

• Installation Done by Professionals:
  If you do not have prior expertise installing speakers, you should strongly consider enlisting the assistance of a professional audio installer to ensure that the speakers are installed correctly and that they work to their full potential.

• The integrity of the Structure:
  Check to see that the construction of the ceiling can withstand the weight of the in-ceiling speaker as well as any changes that may be necessary.

• Positioning of the Speakers:
  To achieve the best possible sound dispersion and audio quality, position the speakers in accordance with the guidelines provided by the manufacturer.

• The wiring:
  When making the connections for the wiring, make sure to use speaker wire of the appropriate gauge, and check that the polarity is correctly matched between the speaker terminals and your amplifier or receiver.

• Management of Power:
  To avoid the speakers from becoming overloaded and to ensure that they may be used safely, it is important to adhere to the power handling parameters provided by the manufacturer.

• Compatibility with Amplifiers:
  It is important to make sure that the impedance and power needs of the speakers are met by the amplifier or receiver you use so that you do not end up hurting either the speakers or the amplifier.

• Mounting Options for Speakers:
  Install the speakers in a safe and secure location in accordance with the guidelines provided by the manufacturer to avoid the possibility of their dropping or being dislodged.

• Protection during the Process of Installation:
  When working on a ladder or other elevated surface during the installation process, exercise extreme caution so that you do not sustain any mishaps or injuries.

• The Management of Wires:
  Ensure that the speaker wires are properly managed and secured in order to prevent damage and maintain a nice appearance.

• Achieving a Balanced Volume:
  In order to produce the best possible audio performance while taking into account the acoustics of the space, you will need to adjust the balance between the two tweeters.

• Repairs and upkeep:
  Regular cleaning of the speaker grilles and the spaces around them is necessary to prevent the accumulation of dust, which can degrade sound quality.

• Protection against Humidity:
  Use materials that are resistant to moisture when installation in areas that are prone to moisture, such as restrooms, and ensure that there is adequate ventilation to prevent damage.

• Take Care Not to Get Too Hot:
  To prevent the speakers from overheating and becoming damaged, avoid positioning them near any potential sources of heat, such as recessed lights or heating vents.

• Young people and animals:
  Install the speakers at a location that is inaccessible to both children and animals to reduce the risk of accidental damage or intentional interference.

• Perform a Test Prior to Completing the Installation:
  Before you call the installation complete, put the speakers through their paces and make sure you test both their functionality and their placement.

FREQUENTLY ASKED QUESTIONS

What is the SpeakerCraft SC-DX-EC6-DT in-Ceiling Dual-Tweeter Speaker?

The SpeakerCraft SC-DX-EC6-DT is an in-ceiling speaker featuring dual tweeters designed to deliver high-frequency audio in a home audio or home theater setup.

What is the primary function of the SC-DX-EC6-DT in-ceiling speaker?

The primary function of this speaker is to reproduce clear and detailed high- frequency audio, enhancing the overall audio experience.

How many tweeters does the SC-DX-EC6-DT speaker have?

The speaker features dual tweeters, meaning it has two separate tweeter drivers.

What is the benefit of having dual tweeters in an in-ceiling speaker?

Dual tweeters can provide a broader dispersion of high-frequency sound, creating a more even and spacious listening experience.

What is the installation method for the SC-DX-EC6-DT speaker?

This speaker is designed to be installed in-ceiling, offering a discreet audio solution that blends into the room.

What type of room is the SC-DX-EC6-DT speaker suitable for?

The speaker can be suitable for various rooms, such as living rooms, home theaters, bedrooms, and more.

Does the SC-DX-EC6-DT speaker require a dedicated amplifier or receiver?

Yes, the speaker requires connection to an amplifier or AV receiver to provide audio signals and power.

What is the power handling capability of the SC-DX-EC6-DT speaker?

The power handling capacity is often specified in watts RMS (root mean square) and indicates how much power the speaker can handle without distortion.

What is the impedance of the SC-DX-EC6-DT speaker?

The impedance is usually indicated in ohms and represents the speaker's resistance to the electrical signal from the amplifier.

Can the SC-DX-EC6-DT speaker be painted to match the room decor?

Some in-ceiling speakers can be painted to blend seamlessly with the ceiling and room aesthetics.

Does the speaker come with a grille or cover for protection?

In-ceiling speakers often include grilles to protect the speaker components and provide a clean look.

Is the SC-DX-EC6-DT speaker suitable for both music and movies?

Yes, the speaker can enhance both music and movie audio experiences by delivering clear high-frequency sound.

Is the speaker easy to install, or does it require professional installation?

Installing in-ceiling speakers might require some technical skill and knowledge of wiring. Professional installation is recommended for optimal results.

Does the SC-DX-EC6-DT speaker require specific wiring or cabling?

The speaker usually requires speaker wire for connection to an amplifier or receiver.

Can the SC-DX-EC6-DT speaker be used as part of a surround sound setup?

Yes, in-ceiling speakers like the SC-DX-EC6-DT can be used as part of a surround sound system for an immersive audio experience.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>