mitzi H852101 Gold Leaf Combo Wall Sconce Light Instruction Manual

mitzi H852101 Gold Leaf Combo Wall Sconce Light

Specifications:

• Product Name : LILA H852101
• Manufacturer: Hudson Valley Lighting
• Maximum Wattage: 8 watts (Type G16.5 lamp)

Product Usage Instructions

Fixture Installation

1. Attach the MOUNTING PLATE (A) onto the junction box using the MOUNTING SCREWS (B).
2. Attach the Ground wire (Green) to the ground inside the outlet box or the GROUND SCREW (C) on the MOUNTING PLATE (A).
3. Connect the white fixture lead to the neutral wire in the outlet box and fasten with a WIRE NUT (D).
4. Connect the black fixture leads to the hot wire in the junction box and fasten securely.
5. Attach the FIXTURE ASSEMBLY (F) to the MOUNTING PLATE (A) and secure with FIXTURE MOUNTING SCREWS (E).
6. Place the SHADE (G) up to the FIXTURE ASSEMBLY (F) and secure with the SOCKET COVER (H).
7. Screw the BULB (I) into the SOCKET of the fixture. Do not exceed the recommended wattage.
8. Restore power to the outlet at the breaker or fuse box.

FAQ:

• Q: What is the maximum wattage for the bulb that can be used with this fixture?
  • A: The fixture is rated for a maximum of 8 watts with a Type G16.5 lamp. Do not exceed this wattage to prevent damage.
• Q: Can this fixture be mounted on any type of junction box?
  • A : This fixture is designed to be mounted on standard round or octagon junction boxes. Ensure that the junction box is securely mounted to the building structure for safety.
• Q: What should I do if there are exposed wires during installation?
  • A: Ensure that there are no exposed wire strands that could cause a dangerous short circuit. Use electrical tape to seal connections and prevent any potential hazards.

WARNING/CAUTION

• DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION. · TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURES MUST BE INSTALLED IN COMPLIANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION AND MAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED FACTORY-TRAINED TECHNICIAN.
• CALIFORNIA PROP 65 : THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER USE.
• UNPACK FIXTURE, PARTS AND PARTS BAG(S) BEFORE DISCARDING THE CARTON. MAKE CERTAIN THAT ALL  PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR TO INSTALLATION FOR ANY DAMAGE. HVLG DOES NOT PAY OR REIMBURSE ELECTRICIAN FEES. FIXTURE MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. SEE WARRANTY FOR EXCEPTIONS.
• PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS.

FIXTURE INSTALLATION

1. Attach the MOUNTING PLATE (A) onto the junction box using the MOUNTING SCREWS (B). Thisfixture is designed to be mounted on a standard round or octagon junction box. The junction box must be securely mounted to the structure of the building.
2. Attach the Ground wire (Green) to the ground inside the outlet box (Generally green or bar copper wire) or the GROUND SCREW (C) on the MOUNTING PLATE (A). NEVER CONNECT GROUND WIRE TO “HOT” WIRE FAILURE TO FOLLOW THIS COULD RESULT IN SERIOUS INJURY OR DEATH.
3. Connect the white fixture lead to the neutral (Generally white) wire in the outlet box. Fasten the wire together with an approved fastener (WIRE NUT) (D). Starting 1″ below the fastener, tightly wrap the connection with electrical tape so that the connection seals the end of the fastener. MAKE SURE THERE ARE NO EXPOSED WIRES OF STRANDS THAT COULD CAUSE A DANGEROUS SHORT CIRCUIT
4. Connect the black fixture leads to the hot (Generally black) wire in the junction box. Fasten the joined wires same as the previous step. NEVER REVERSE HOT AND NEUTRAL WIRES. FAILURE TO FOLLOW COULD RESULT IN SERIOUS IN URY OR DEATH
5. Attach the FIXTURE ASSEMBLY (F) to the MOUNTING PLATE (A) and secure with the FIXTUREMOUNTING SCREWS (E).
6. Place the SHADE (G) up to the FIXTURE ASSEMBLY (F) and secure with the SOCKET COVER (H).7. Screw the BULB (I) into the SOCKET of the fixture. THIS FIXTURE IS RATED FOR MAX 8-WATT TYPEG16.5 LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGEĞ8. Restore power to the outlet at the breaker or fuse box.

• www.hvlgroup.com

References

• Hudson Valley Lighting Group

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>