mitzi HL589201 Plug-In Wall Sconce Instruction Manual
- June 8, 2024
- mitzi
Table of Contents
mitzi HL589201 Plug-In Wall Sconce
WARNING/CAUTION
- DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
- TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURES MUST BE INSTALLED IN COMPLIANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION AND MAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED FACTORY-TRAINED TECHNICIAN.
- CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER USE.
- REMOVE THE FIXTURE, PARTS, AND PARTS BAG(S) FROM THE CARTON. BEFORE DISCARDING THE CARTON, DOUBLE-CHECK TO MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR TO INSTALLATION FOR ANY DAMAGE TO THE FIXTURE.
- DIMMING: THE FIXTURE CAN BE CONTROLLED BY A WALL-DIMMING DEVICE. ONLY USE TRIAC/ELECTRONIC DIMMER. MAKE SURE THE CARTON IS MARKED FOR USE WITH LED COMPACT FLUORESCENT-INCANDESCENT LIGHT SOURCE ONLY. THESE CAN BE PROVIDED BY YOUR LOCAL ELECTRICAL DISTRIBUTOR, HOME CENTER, OR HARDWARE STORE.
- PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANERS.
FIXTURE INSTALLATION
- Determine the location of the lamp. Using the MOUNTING PLATE(1) as a template, mark the location of the hole for the ANCHOR(4).
- Drill the appropriate size holes for the anchors (the holes should be slightly smaller than the size of the anchors ). Install the ANCHORS(4) to the hole.
- Attach the MOUNTING PLATE(1) to the wall, and screw the WOOD SCREW(2)to the ANCHORS(4).
- Attach the FIXTURE ASSEMBLY(5) to the MOUNTING PLATE (1) and secure with the SET SCREWS(3).
- Assemble the STEM(6) to the FIXTURE ASSEMBLY(5).
- Insert the BULB (7) up into the SOCKET of the fixture. THIS FIXTURE IS RATED FOR 4 WATT LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGE!
- Assemble the GLASS SHADE(8) to the socket.
- Plug the PLUG(9) into the wall outlet. Turn on the ON/OFF switch online.
PART LIST
ITEM | DESCRIPTION | PART NUMBER |
---|---|---|
1 | MOUNTING PLATE | HDW-HL589201 |
2 | WOOD SCREW | HDW-HL589201 |
3 | M4 SET SCREW | HDW-HL589201 |
4 | ANCHOR | HDW-HL589201 |
5 | FIXTURE ASSEMBLY | FAS-HL589201 |
6 | STEM | STM-HL589201 |
7 | G9 BULB | BLB-4W-G9 |
8 | GLASS SHADE | GLS-HL589201 |
9 | PLUG | HRD-HL589201 |
Questions
Questions? We’re here to help!
Contact us at
CustomerService@hvlgroup.com.
www.hvlgroup.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>