Mitzi HL617201A Zoe 1 Light Table Lamp in Aged Brass Ceramic Gold Instruction Manual
- June 13, 2024
- mitzi
Table of Contents
Mitzi HL617201A Zoe 1 Light Table Lamp in Aged Brass Ceramic Gold
Instruction Manual
WARNING/CAUTION
-
DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
-
TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION ANDMAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED FACTORY TRAINED TECHNICIAN.
-
CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM.
WASH HANDS AFTER USE. -
UNPACK FIXTURE, PARTS AND PARTS BAG(S) BEFORE DISCARDING THE CARTON. MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR TO INSTALLATION FOR ANY DAMAGE. HVLG DOES NOT PAY OR REIMBURSE ELECTRICIAN FEES. FIXTURE MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. SEE WARRANTY FOR EXCEPTIONS.
-
PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS
Installation Instruction
FIXTURE INSTALLATION
- Insert the HARP (D) by squeezing the sides and placing on the SADDLE (C) of the FIXTURE ASSEMBLY (B).
- Install the BULB (E) into the socket THIS FIXTURE IS RATED FOR 75 WATT TYPE A LAMP. DO NOT CEED THE RECOMMENDED WATTAGE!
- Carefully remove the protective covering over on the SHADE (F), place the SHADE (F) over the HARP (D) and secure with the FINIAL (G).
- Plug the CORD (A) into the wall outlet. Turn the switch on the socket.
| PART(S) | REPLACEMENT PART | NUMBER |
|---|---|---|
| D | HARP | HRP-HL617201A |
| F | SHADE | SHD-HL617201A |
| G | FINIAL | FIN-HL617201A |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>