Char-Griller 9800 Smart Grill Controller Instruction Manual
- June 6, 2024
- Char-Griller
Table of Contents
Char-Griller 9800 Smart Grill Controller
INSTALLATION INSTRUCTION
OPERATING INSTRUCTIONS
Setting Up
This grill is designed for use outdoors, away from any flammable materials. It
is important that there are no overhead obstructions and that there is a
minimum distance of 12 feet (-4 meters) from the grill. It is important that
the ventilation openings of the grill are not obstructed. The grill must be
used on a level, stable surface. The grill should be protected from direct
drafts and positioned or protected against direct penetration by any trickling
water (e.g. rain). Do not move grill while hot and do not leave unattended
during operation. Follow basic electrical safety precautions for outdoor
appliances including: 1) Use only approved GFCI electrical outlet. 2) Do not
plug appliance in until fully assembled and ready for use. 3) Do not expose
electrical connections to rain or water at any time. 4) Place cords to avoid
tripping hazards. 5) Ensure all extension cords are rated for outdoor use. 6)
Employ a licensed electrical contractor to address any additional concerns for
safe installation and operation.
NEVER EXCEED 700°F BECAUSE THIS WILL DAMAGE THE FINISH AND CONTRIBUTE TO RUST.
PAINT IS NOT WARRANTED AND WILL REQUIRE TOUCH-UP. THIS UNIT IS NOT WARRANTED
AGAINST RUST.
Important Safety Notes
GRAVITY 980 SAFETY SWITCHES
- Your Gravity 980 is equipped with safety switches on the hopper lid and ash pan door
- Before your grill can begin temperature control, the hopper lid and ash pan door MUST be closed
- If the fan is not coming on, please check first that both safety switches have been activated by closing each of these doors
**Using the Gravity 980 Digital Controller
**
- Power On/ Off: Press 1 second to turn on. Press and hold for 2 seconds to turn off
- Control Dial: Rotate to make a selection up or down. Press the center of the dial to confirm
- Status Screen
- Meat Probe 1 Jack
- Meat Probe 2 Jack
- Set Meat Probe Temperature Goal
- Turbo Fan Setting
- Set Countdown Timer
- Set Grill Temperature Goal
- Door Open Indicator
- Grill Temperature Display
- Countdown Timer
- Turbo Mode Enabled
- Paired with Phone: Will light up when a smartphone is paired with the controller
- Fan Speed Display: Shows if the fan is running and at what speed
- Meat Probe 2 Temperature
- Meat Probe 1 Temperature
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>