SINJI Wireless Hair Curler User Manual
- June 6, 2024
- SINJI
Table of Contents
SINJI Wireless Hair Curler User Manual
DESCRIPTION
Create beautiful curls and waves with the Sinji Wireless Hair Curler! Say goodbye to messy, tangled cables with this cordless curling iron. No skills are required to get started with this device due to the automatic mode with built-in timer. The adjustable control lets you easily adjust the size of your curls, so no need for multiple curling tubes. Just one button to automatically create beautiful curls or waves, anytime, anywhere!
With the built-in battery you can use the Wireless Hair Curler anywhere for an hour, in addition you can charge other devices via the included USB cable.
IN THE BOX
- 1x Sinji Wireless Hair Curler
- 1x USB-C cable
- 2x Hair clip
- 1x Comb
- 1x Manual
TECHNICAL SPECIFICATIONS
- Model: NBEH-029
- Lithium battery: 5000mAh
- Power supply: DC 5V @ 2A
- Charging time: +/- 3 hours
- Battery duration: +/- 60min on 180°C
- Size: 192 * 60 mm
- Weight: 360 gram
Product Overview
HAIR CURLING
-
Charge the battery.
Connect the Wireless Hair Curler with the included USB-C cable and charge it before use. Remove the charging cable before use, the Wireless Hair Curler will not turn on if the charging cable is still present. -
Press and hold the On/Off button for 2 seconds.
The unit will emit a signal and the LCD screen will turn on.
To turn off the device, press and hold the On/Off button again for 2 seconds. The device will turn off after 10 minutes if not used. -
Press the On/Off button to select the temperature, direction of rotation, temperature unit and timer. Then use the SELECT button to choose a setting to modify.
The different options are:- Temperature: 150 °C, 160 °C, 170 °C, 180 °C, 190 °C, 200 °C
- Direction of rotation: Clockwise, Counter clockwise
- Temperature unit: °C, °F
- Timer: 8s, 10s, 12s, 14s, 16s, 18s
-
The Wireless Hair Curler starts to heat up to the selected temperature, the heating element symbol on the LCD display starts flashing to indicate that it is heating up.
When it has finished heating, the symbol will stop flashing and the unit will beep. -
First comb through your hair to remove tangles and divide the hair into sections of max. 2cm.
-
Place a section of hair along the heating element and press and hold the Start button.
-
Release the Start button when the first beep is heard.
The Wireless Hair Curler will beep twice after the set timer has expired.
POWER BANK
- Connect a USB charging cable to the USB-A port of the Wireless Hair Curler
- Connect the other end of the USB cable to the device you want to charge.
- The Wireless Hair Curler will now act as a power bank to charge the connected device, until the battery of the Wireless Hair Curler itself is empty.
SAFETY INSTRUCTIONS
- Keep the device dry, do not use it in places where it can get wet, such as the bathroom
- Do not use the device if there is visible damage or if it has been badly dropped.
- Do not leave the device unattended. Switch it off by pressing and holding the On/Off button for 2 seconds.
- Keep the unit away from heat-sensitive surfaces and objects. The heat element may cause a fire hazard and melting.
- This device is not a toy, keep it away from children.
- If the cable is damaged, do not use it for charging. Other USB-C cables are also suitable for charging this device.
CLEANING
Remove the USB cable and turn off the hair curler before cleaning the device. Never use aggressive cleaning agents or hard brushes. Clean the device with a soft cloth slightly moistened with isopropyl alcohol. No moisture should be allowed to penetrate into the device. Do not use the appliance until it is completely dry.
ISSUES AND SOLUTIONS
Issue: The device does not turn on.
Cause: The charging cable is still connected.
Solution: Remove the charging cable before switching on the device.
Issue: The device does not turn on.
Cause: The battery is not charged.
Solution: Charge the battery for +/- 3 hours to fully charge it and
remove the cable.
Website: http://www.sinjiproducts.com/