SPON XC-9610 IP PoE Ceiling Speaker Owner’s Manual
- September 28, 2024
- SPON
Table of Contents
SPON XC-9610 IP PoE Ceiling Speaker
Main features
Performance and Encoding
- Employs a high-speed, industrial-grade dual-core (ARM+DSP) chip for superior processing power.
- Features versatile voice encoding with both narrowband (G.711a/u) and broadband (G.722) options for crystal-clear voice paging.
Connectivity & System Integration
- Supports receiving paging from SIP phones through 10 dedicated multicast addresses.
- Incorporates a multicast scalable function, efficiently saving SIP account resources.
- Fully compatible with standard SIP protocols for seamless integration with leading SIP PBX systems like Yeastar, Asterisk, and Cisco.
Audio Management & Network Functionality
- Facilitates background music, emergency paging, and alarm signals from the SPON management system.
- Features dynamic volume control that automatically adjusts based on ambient noise.
- Offers flexible deployment with PoE or PoE+ interface support.
- Equipped with remote management and online upgrading capabilities for ongoing system optimization.
SPECIFICATION
Power Parameters
- Power Supply: DC 24V/1A, PoE (IEEE802.3af), PoE+ (IEEE802.3at)
- Standby Power Consumption: ≤3W
- Rated Power Output: 20W(@DC 24V/1A powered)
15W (@PoE powered)
20W (@PoE+ powered)
Audio Parameters
-
Audio Codec: G.711A-law, G.711μ-law, G.722
-
Sensitivity: 88dB±3dB (1W, 1m)
-
Maximum SPL: 97dB±3dB
-
S/N (Signal-to-Noise) Ratio: ≥80dB
-
Audio Sampling & Bit Rate:
8kHz~44.1kHz, 16bit,
8kbps~320kbps -
Frequency Response: 100Hz~18kHz
Network Parameters
- Network I/F: 10BASE-T/100BASE-TX RJ45
- Network Protocol: SIP (RFC3261), FTP, HTTP, TCP/ IP, UDP, ARP, ICMP, IGMP
- Configuration Method: Web Interface or DevConfig Tool
Mechanical &Environment Properties
- Mounting Method: Ceiling-mounted
- Installation Environment: Dry Indoor Locations Only
- Operatiing Temperature: -20℃~+50℃ (-4℉~122℉)
- Operating Humidity: 10%~90% RH non-condensing
- Body Material: ABS Composite Plastic
- Color: Off-White
- Product Dimensions: φ213x165mm
- Product Weight: 1.4KG
- Packaging: Carton Box
- Packed Dimensions: 260x250x240mm
- Packed Weight: 2.4KG
- Product Warranty: 2 Years Limited
Accessories
- 1×2-Pin Pluggable Terminal Block Connector (3.81mm Pitch, AWG 26-16)
- 1×Waterproof Joint
- 1×Quick Installation Guide
- 1×QualityCertificate&Warranty Card
Compliance
CE (EMC Directive 2014/30/EU)、CE (LVD Directive 2014/35/EU)
PORTS DESCRIPTION
- Network Port: To connect with Ethernet switch.
- Reserved Port: 1,2 Alarm Input, 3,4 Audio Input
- Power Port: To connect with power supply.
CONNECTION DIAGRAM
INSTALLATION
- Drilling a hole, the size please refer to the dimension diagram.
- Connecting the network cable with the IP Ceiling Speaker. (The network cable should be placed in the hole).
- Placing the speaker in a suitable place to the hole, and ensure it is fixed well.
APPLICATION
Application 1
The IP PoE Ceiling Speaker XC-9610 support SIP protocol which can be
independently used as a sip endpoint to integrated with mainstream VOIP system
for receiving sip call from SIP phone or SIP softphone; Meanwhile, it also can
receive broadcast from SPON management software 、IP Paging Mic and XC-APP.
Application 2
The IP PoE Ceiling Speaker XC-9610 support paging from SIP phone by using
multicast address, the multicast address and priority can be set on its
webpage.
Application 3
The IP PoE Ceiling Speaker XC-9610 support “Multicast scalable” function, when
SIP phone initiate call to one horn speaker which registered to VOIP system,
the other speakers with same multicast address will simultaneously receive the
sip calling from the SIP phone.
Application 4
he IP PoE Ceiling Speaker XC-9610 support “Loud ringing extension” function.
The assistant ringing SIP account of horn speaker and the SIP phone can be put
into a ringing group(set on XC-9000). When calling to group account, all
terminals in the same group will ringing. The ringing will be stopped after
the call is answered by sip phone.
case
Address : No.70, Nantang Road, High-tech Zone, Changsha, China.
Mobile : +86 138 7314 3517
email : inquiry@sponcomm.com Tel : +86
731 8557 0190