StarTech ST121WHDLR HDMI Over Wireless Extender User Guide

ST121WHDLR HDMI Over Wireless Extender

“`html

Specifications:

• Product: HDMI over Wireless Extender
• Resolution: 1080p
• Range: 200 meters

Product Usage Instructions:

Connecting the Extender:

1. Position the Wireless Transmitter near the Video Source Device
   (e.g. Computer, Blu-ray Player).

2. Connect an HDMI Cable to the HDMI IN Port on the Wireless
   Transmitter and to the Video Output Port on the Video Source
   Device.

3. (Optional) Connect the IR Blaster to the IR Out Port on the
   Wireless Transmitter.

4. Connect the Universal Power Adapter to the DC 5V Port on the
   Wireless Transmitter and to an AC Electrical Outlet.

5. Position the Wireless Receiver near your Display Device (e.g.
   Television, Projector).

6. Connect an HDMI Cable to the HDMI Output Port on the Wireless
   Receiver and to an HDMI port on the Display Device.

7. (Optional) Connect the IR Receiver to the IR In Port on the
   Wireless Receiver.

8. Connect the Universal Power Adapter to the DC 5V Port on the
   Wireless Receiver and to an AC Electrical Outlet.

Mounting the Transmitter/Receiver:

1. Align the Mounting Hardware with the Mounting Hole on the back
   of the Transmitter/Receiver.

2. Screw the Mounting Hardware into the Mounting Hole, being
   careful not to overtighten.

3. Loosen the Adjustment Knob on the Mounting Hardware.

4. Adjust the position the Transmitter/Receiver is facing.

5. Tighten the Adjustment Knob on the Mouting Hardware when the
   Transmitter/Receiver is in the desired position.

LED Indicators:

FAQ:

Q: What is the maximum distance between the transmitter and

receiver?

A: The maximum distance between the transmitter and receiver is
600 ft.

Q: What should be done if the wireless signal is

obstructed?

A: If the wireless signal is obstructed by walls or other
interference, the signal quality and maximum distance will likely
be reduced.

Q: What carrier frequency does this product support for IR

signals?

A: This product can only support an IR signal in the 38kHz
carrier frequency when extending infrared.

“`

Quick-Start Guide

HDMI over Wireless Extender |1080p | 200 m

Product Diagram (ST121WHDLR)
1 123

8 4 5 67

Note: The above image represents both Transmitter and Receiver. The ports are located in the same position on both the Transmitter and Receiver.

Port/Button/LED/Part

1

Pairing/Channel Button

2 Network LED 3 Video LED 4 IR OUT Port

Function Transmitter · Pairing: Used to pair devices to the Wireless Transmitter. Note: Press and hold for 5 seconds. · Channel: For better transmission, use the Channel Button to use another channel.
· Solid red indicates that the network is connected.
· Solid blue indicates that the Display Device is connected.
· Connect an IR Blaster to transmit an IR signal.

5 USB Port
6 DC 5V Port 7 HDMI IN Port 8 IR Blaster

1

Pairing/Channel Button

2 Network LED 3 Video LED 4 IR IN Port

5 USB Port

6 DC 5V Port 7 HDMI OUT Port 8 IR Receiver

· Used for firmware updates. Note: For future firmware updates refer to the firmware section on the Product Support tab www. startech.com/ST121WHDLR.
· Powers the Wireless Extender.
· Connects the Video Source Device to the Wireless Extender.
· Used to transmit an infrared signal.
Receiver
· Pairing: Used to pair devices to the Wireless Receiver. Note: Press and hold for 5 seconds.
· Channel: For better transmission, use the Channel Button to use another channel.
· Solid red indicates that the network is connected.
· Solid blue indicates that the Display Device is connected.
· Connect an IR Receiver to receive an IR signal.
· Used for firmware updates Note: For future firmware updates refer to the firmware section on the Product Support tab www. startech.com/ST121WHDLR.
· Powers the Wireless Extender.
· Connects the Display Device to the Wireless Extender.
· Used to receive an infrared signal.

Requirements
For the latest requirements, please visit www.startech.com/ST121WHDLR.

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: June 11, 2019 11:05 AM

Connecting the Extender
1. Position the Wireless Transmitter near the Video Source Device (e.g. Computer, Blu-ray Player).
2. Connect an HDMI Cable (sold separately) to the HDMI IN Port on the Wireless Transmitter and to the Video Output Port on the Video Source Device.
3. (Optional) Connect the IR Blaster to the IR Out Port on the Wireless Transmitter, and position the IR Blaster directly in front of the IR sensor on your Video Source Device.
Note: Check the manual of your Video Source Device for the IR sensor location.
4. Connect the Universal Power Adapter to the DC 5V Port on the Wireless Transmitter and to an AC Electrical Outlet.
5. Position the Wireless Receiver near your Display Device (e.g. Television, Projector).
6. Connect an HDMI Cable to the HDMI Output Port on the Wireless Receiver and to an HDMI port on the Display Device.
7. (Optional) Connect the IR Receiver to the IR In Port on the Wireless Receiver, and position the IR Receiver in the area you would like to point your IR controller.
8. Connect the Universal Power Adapter to the DC 5V Port on the Wireless Receiver and to an AC Electrical Outlet.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Industry Canada Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
IC Radiation Exposure Statement This equipment complies with IC RSS-247 radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0.5cm between the radiator and your body. Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of thirdparty companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Notes: The maximum distance between the transmitter and the receiver is 600 ft. If the wireless signal is obstructed by walls, or other interference the signal quality and maximum distance will likely be reduced. When extending infrared, this product can only support an IR signal in the 38kHz carrier frequency.
Mounting the Transmitter/Receiver
The Transmitter/Receiver can be mounted using the Mounting Hardware included.

1. Align the Mounting Hardware with the Mounting Hole on the back of the
   Transmitter/Receiver.
   2. Screw the Mounting Hardware into the Mounting Hole, being careful not to overtighten.
   3. Loosen the Adjustment Knob on the Mounting Hardware.
   4. Adjust the position the Transmitter/Receiver is facing.
   5. Tighten the Adjustment Knob on the Mouting Hardware when the Transmitter/ Receiver is in the desired position.
   LED Indicators

LED

Display

Function

HDMI

Network

Transmitter

Solid

Power is connected to the Transmitter.

and
HDMI Receiver

Video
Network & Video

Slowly flashing red Connecting to a Device.

Solid

Video transmission active.

Slowing flashing blue No video signal input.

Flashes

Indicates the Receiver is pairing.

Alternate flashing Channel switching in active. (flash, pause, flash)

Warranty Information
This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Safety Measures
· If product has an exposed circuit board, do not touch the product under power.
Mesures de sécurité
· Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

·
Misure di sicurezza

· Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso. Säkerhetsåtgärder
· Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

StarTech.com Ltd.
45 Artisans Cres London, Ontario N5V 5E9 Canada

StarTech.com LLP
2500 Creekside Parkwy Lockbourne, Ohio 43137 U.S.A.

StarTech.com Ltd.
Unit B, Pinnacle 15 Gowerton Rd, Brackmills Northampton NN4 7BW United Kingdom

FR: fr.startech.com DE: de.startech.com ES: es.startech.com NL: nl.startech.com IT: it.startech.com JP: jp.startech.com

References

• holders.fr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>