1Mii B10 USB Bluetooth 5.0 Audio Transmitter for Windows User Guide
- June 5, 2024
- 1Mii
Table of Contents
1Mii B10 USB Bluetooth 5.0 Audio Transmitter for Windows
Packing List
Product overview and control features
Step1: The first time you plug BIO into Windows/Mac USB port, it will
install compatibledrivers automatically.
Step 2: The BIO to PAIRING MODE the first time you use it it should
automatically enter pairing mode, the led will flash blue and red alternately.
If it doesn’t, please press and MFB for 2 seconds.
Step 3: Enter your headphone or speaker into PAIRING MODE Keep the
devices in close proximity to each other and wait until nairina has comnlated
the EDS will ston flashes.
Makea VOIP call-Double click MFB to enable TALK MODE, Blue LED on for 3
seconds and then off for 3 seconds (Once the call has finished,
double click MFB again to return to music streamina)
Computer set
Step 1. Right-click the speaker icon on right-corner of screen. And
select “playback devices”
Setup 2. Set BI0″ as default device.
LED Indicator
- Pairing mode
- Connected with aptX-LL codec
- Connected with aptX-HD codec
- Connected with aptX codec
- Connected with fast stream codec
- Connected with SBC codec
- Disconnected
- Connected 2 devices
- Restored factory default settings
- Call mode
Important Note:
- Prodct cannot be use with a TV/Car.
- To get better operational range, please dont plug BIO in the back of the computer. We suggest using CSR headphones to get the best Bluetooth stability and range.
- An unclean USB port can result in a crackly or static-like sound.