1Mii YM2000-MK02 Stereo Bluetooth Car Speakerphone User Manual
- June 4, 2024
- 1Mii
Table of Contents
1Mii YM2000-MK02 Stereo Bluetooth Car Speakerphone
WHAT IS IN THE BOX
PRODUCT OVERVIEW
- Mute button
- Multi-function button
- LED indicator
- Siri/ Google button
- Charging port
- Microphone
- Power On/off
- Sun visor clip
| LE D Ind icat or | Act i on | Status |
|---|---|---|
| Blue | Flashes | Connected |
Red
| Flashes| Low battery
Shines| Battery is charging
Blue & Red| Flashes| Pairing mode
Quick guide
Instructions for operation
Power on and pairing
- Push the power switch to ‘ON”.
- Set MK02 to pairing mode, LED flashes Blue/ Red alternately fast.
- First-time use: MKO2 will auto-enter pairing mode.
- Afterward: When the ON/OFF switch is in the ‘ON” position and MK02 is powered off, shake it to power on, and there will be a prompt tone.
- Activate Bluetooth on your phone or another device and click “MK02′ to connect
- Wait and connected (For quick pairing, better keep them within I meteer when pairing).
Multi-Point connectivity
- Connect MK02 with the first phone.
- Turn off the Bluetooth function on the first phone. MK02 enters pairing mode automatically.
- Connect MK02 with the second phone.
- Turn on the Bluetooth function on the first phone, it’ll reconnect with MK02 automatically. If not, reconnect the first phone with MK02 manually. Now you have two phones connected with MK02.
- When two phones A and B are connected at the same time, only one phone can play music at a time. When phone B plays music, it needs to stop the music on phone A.
Clear pairing history
When powered on, long press the and “ ° button simultaneously for about 5
seconds, then must power off manually to clear the pairing history, there will
be a prompt tone. (Restart to take effect)
Exit pairing mode
- When MK02 is in pairing mode and no connection is found, it will exit pairing mode after 10 minutes and enter standby mode. Then it will powers off after another 5 minutes.
- When the paired device is out of the Bluetooth range, MK02 will enter standby mode. And it will power off automatically 25 minutes later.
Control functions
The Bluetooth® word mark and logos are owned by Bluetooth SLG, Inc. and any use of such marks by IMii Ltd. is under license. Other trademarks and trade names are those of their respective owners.
FCC
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference.Changes or modifications not expressly approved by IMii Ltd. will void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected.
- Consult the manufacturer or an experienced radio/TV technician for help.
This product, like other radio devices, emits radiofrequency electromagnetic energy and operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the SCientinc community and result from deliberations or panels and committees of scientists who continually review and interpret the extensive research literature.
Warranty
Warranty service is limited to normal use. Any man-made damages Such as from
connecting to an unsuitable power source, using an unsuitable device, or not
following the instructions, as well as damages that did not occur during
shipping. repairs and adjustments not approved by the company, damages from
misuse, inattention, or improper installation may cause the warranty to be
ineffective immediately. This warranty does not include shipping fees.
Disposal
Always dispose of the used appliance at a recycling center. Do not dispose of
the used appliance together with household waste.
eVatmaster Consulting GmbH
Bettina. 30
60325 Frankfurt am Main, Germany
Contact@evatnmaster.com
Scan the code tO get more information.
Manufacturer: Shenzhen Ankbit Electronics Limited
Address: Runfeng Industrial Park, No. 4197 Baoan Blvd, Xixiang St, Baoan
Dist, Shenzhen, China
Operator: Shenžhen IMii Technologies Limited Address: Qianhai Complex
A201, Qianwan Road 1, Qianhai Shenzhen-Hong Kong Cooperation Zone, Shenzhen,
China We hope you never have the need, but if you do, our service is friendly
and hassle-free.
web: www.1mii.com
support@1mi.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>