1Mii B0302 HiFi Wireless Audio Adapter User Manual
- June 4, 2024
- 1Mii
Table of Contents
1Mii B0302 HiFi Wireless Audio Adapter
In the box
Product Overview
Basic operation
BT MODE
USB WIRED MODE
Control functions
Instructions
Connect an amplifier or powered speakers to the RCA/Optical port of the DS220.
Power on
- Connect the DS220 to the DC 5V port with a power cable, and the product will automatically turn on.
- Press and hold the () button for 2S to power on.
Pairing
- When used for the first time, the D$220 will automatically enter pairing mode after powering on. ( 1 icon flashes on the display screen)
- Activate Bluetooth on your phone or another device, then click ‘DS220″ to connect.
- Wait and connect (for fast pairing, it is best to keep them within I’m when pairing)
- B icon is displayed on the screen after the connection is successful.
Pair with the second device
- Press and hold the button for 2s to enter the pairing mode again.
- B icon flashes on the display screen)
- Activate Bluetooth on the second device and click ‘DS220″ to pair.
- B icon is displayed on the screen after the connection is successful.
Note : You can only play music on one device at a time. You need to pause music on your device before you can play music on another device
How to enter pairing mode?
When using the device for the first time, it will automatically enter the
pairing mode after powering on.
Next time to use, long press the (M) button for 2s to enter pairing mode.
Factory reset
Press and hold the (M) button for 10 seconds to reset the device.
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by IMii Ltd. is under license. Other trademarks and trade names are those of their respective owners.
FCC Statment
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference. Changes or modifications not expressly approved by IMii Ltd. will void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasongble protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected.
- Consult the manufacturer or an experienced radio/ TV technician for help.
This product, like other radio devices, emits radiofrequency electromagnetic energy and operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the Scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
CE
IMii Ltd. hereby declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.lmi.com
In accordance with Article 10 (2) and Aticle 10(10), this product is allowed
to be used in all EU member states.
Shenzhen IMii Technologies Limited Baoan District, Shenzhen 518100 China EU
Importer eVatmaster Consulting GmbH Bettina. 30,60325 Frankfurt am Main,
Germany
Warranty
Warranty service is limited to normal use. Any man-made damages Such as from connecting to an unsuitable power sOurce, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.
Disposal
Always dispose of the used appliance at a recycling centre. Do not dispose the used appliance together with household waste. Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
- Operator: ANKBIT INTERNATIONAL LIMITED
- Address: ROOM 803, CHEVALIER HOUSE, 45-51 CHATHAM ROAD SOUTH, TSIM SHA TSUI, KOWLOON, HONG KONG
- Manufacturer: Shenzhen Ankbit Electronics Limited
- Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St., Baoan
- Dist, Shenzhen, China We hope you never have the need, but if you do, Our service is friendly and hassle-free. support@lmi.com web: www.lmii.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>