1Mii ML100 Wireless Audio Receiver User Manual
- June 3, 2024
- 1Mii
Table of Contents
1Mii ML100 Wireless Audio Receiver
ln the box
Product overview
Quick guide
Instructions for operation
-
Slide power switch to “ON” side.
-
Set MLI0D/MLI0I into the pairing mode, the LED flashes Blue / Red alternately fast.
– First- time use: ML100/ML101 will auto enter the pairing mode .
– Afterward: Long press / button to enter the pairing mode.
(The LED flashes Blue / Red alternately fast) -
Activate bluetooth on your phone or another device and c lick “MLI00/MLI0f to connect
-
Wait and connected (For quick pairing, better keep them within I meter when pairing).
Product overview
Button | Operation |
---|---|
Power ON / OFF |
x1
| Pick up/ Hang up a call
x2
| Last number redial
1s
| Reject an incoming call
2s
| Pairing
| Previous
1s
| Volume up
1s
| Next
x1
| Volume down
1s
| Activate Siri
10s
| Clear the pairing list
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by 1Mii Ltd. is under license. other trademark and trade
names are those of their respective owners.
FCC:
This device complies with part 15 of the FCC rules. operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference. Changes or
modifications not expressly approved by 1Mii Ltd. will void the user’s
authority to operate the equipment This equipment hos been tested and toured
to comply with the limits for a Class B digital device. pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in o residential installation. This equipment
generates. uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on. the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected.
- Consult the manufacturer or on experienced radio/TV technician for help.
This product, like other radio devices, emits radio frequency electromagnetic energy and operates within the guidelines found in radio frequency safety standards a nd recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees ofscientists who continually review a nd interpret the extensive research literature.
CE
1Mii Ltd. hereby declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/ EU
The full test of the EU declaration of conformity is available at the
following internet address: www.lmii.com
In accordance with Article 10(2) and Article 10(10) , this product is allowed
to be used in all EU member states.
Shenzhen IMii Technologies limited
Baoan District Shenzhen 518100 China
EU Importer:
eVatmoster Consulting GmbH
Bettinostr. 30,60325 Fra nkfurt am Moin,Germony
Warranty
Warranty service is limited to normal use. Any man- mode damages such as from
connecting to an unsuitable power source. using an unsuitable device, or not
following the instructions, as well as damages that did not occur during
shipping, repairs a nd adjustments not approved by the company, damages f rom
misuse, inattention, or improper installation may cause the warranty to be
ineffective immediately. This warranty does not include shipping fees.
Disposal
– A Always dispose of the used appliance at a recycling centre.
– Do not dispose the used appliance together with household waste.
eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main,Germany
contact@evatmaster.com
Scan the code to get more information
Manufacturer: Shenzhen Ankbit Electronics Limited
Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St., Baoan
Dist., Shenzhen, China
Operator: Shenzhen 1 Mii Technologies Limited
Address: Qianhai Complex A201, Qianwan Road 1, Qianhai Shenzhen-Hong Kong
Cooperation Zone, Shenzhen, China
We hope you never have the need, but if you do, our service is friendly
and hassle-free.
Bsupport@1mii.com | web:
www.1mii.com