EUROPOLE Java 46990 Recessed Floor Lights Instruction Manual

EUROPOLE Java 46990 Recessed Floor Lights

USER MANUAL

WARNING: The installation must be carried out by qualified persons in accordance with the standards and regulations in force. It is recalled that the decision to install the products in an environment compatible and in compliance with the standards and good practices is the full responsibility of the buyer and the installer. Read and follow the instructions before installing, powering on or using the products. We do not accept any liability resulting from improper implementation or installation of the products.

The devices must not be modified, even partially, otherwise the warranty will not apply. Used electrical products should not be thrown away with household waste: they must be disposed of at an appropriate recycling facility. Do not modify the product by adding silicone or other sealing material.

IMPORTANT: Always turn off the power to the network before each installation or maintenance operation.

1. TECHNICAL SPECIFICATIONS

Electrical input characteristics: 700mA, 50-60 Hz
Operating temperatures: – 20°C / + 35°C
Installation: recessed in a wall
Materials: cast aluminium body and tempered glass lens

2. CONTENTS

x1 light fixture
NOTE: Finishing trim sold separately. This ensures that the product is properly maintained; do not install it without a trim.

3. PRE-INSTALLATION PRECAUTIONS

Open the package and check the contents carefully. If there is any damage, return the products to the seller. Do not attempt to handle a damaged product.
Make sure you have secured the electrical installation you are working on.
Drilling diameter for recess: 32mm
Minimum thickness of the material receiving the JAVA product: 5mm

4. INSTALLATION

1. Make sure you have all the necessary parts: the JAVA product, a 700mA power supply, a finishing trim with internal locking ring, the BTR alignment and retention screw.

2. Mount the trim on the product by aligning its locking hole with that of the JAVA unit. Lock into place using the BTR screw.

3. Drill the recess hole, diameter 32mm.

4. Connect a 700mA power supply to the network.

5. Insert the power supply into the recess hole, then the product. Adjust according to the desired effect.

Contains an energy class G light source.

Specifications

• Model: JAVA
• Product Code: 46990
• Power Supply: DC 3V 700mA
• Drilling Diameter for Recess: 32mm
• Minimum Material Thickness for Installation: 5mm

Product Usage Instructions

1. Pre-Installation Precautions

Open the package and inspect the contents for any damage. Do not use damaged products. Secure the electrical installation before proceeding.

2. Required Parts

Ensure you have all necessary parts: the JAVA product, a 700mA power supply, a finishing trim with internal locking ring, and the BTR alignment and retention screw.

3. Mounting the Trim

Align the locking hole of the trim with that of the JAVA unit.
Secure it in place using the BTR screw.

4. Drilling Hole

Drill a recess hole with a diameter of 32mm.

5. Power Connection

Connect the 700mA power supply to the network.

6. Installation

Insert the power supply and then the product into the recess hole. Adjust accordingly for the desired effect.

FAQ

Q: What should I do if I receive a damaged product?

A: If you receive damaged products, return them to the seller and do not attempt to use them.

Q: Can I install the product without the finishing trim?

A: It is recommended to install the product with the finishing trim to ensure proper maintenance and installation.

References

• Accueil

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>