1Mii YMS4519MK04 Original Voice Amplifier User Manual
- June 5, 2024
- 1Mii
Table of Contents
1Mii YMS4519MK04 Original Voice Amplifier User Manual
In The Box
Product Overview
Control Functions
-
Power switch & volume control
Rotate the knob to “ON” to turn on the amplifier and indicator flashes blue. Then rotate the knob to increase the volume. And rotate reversely to decrease the volume till turn off.
-
3.5mm Microphone Jack
When plugged in wired microphones, other functions can not work, such as TF card playing, USB flash drive playing, wireless microphones function. And to avoid howling, please do not put the microphone toward the speaker. -
M Button
Short press the M button to select mode (USB, TF, wireless microphones). -
Previous Short
press to play the previous song. Long press to fast backward (the indicator blinks blue quickly). -
Play/Pause
Short press to pause or play the music. Long press until the indicator blinks blue quickly to enter single music repeat mode. Long press until the indicator stays blue on to repeat all the music in the list. -
Next
Short press to play the next song. Long press to fast forward (the indicator blinks blue quickly). -
Indicator
Blue light: always on after power on. (Blue light flashes slowly: wireless microphone can be connected)
Red light: always on when charging, and off when fully charged.
-
Type-C USB(DC 5V)
Use DC 5V power adapter and Type-C USB power cable to charge the PA system.
Note: Please use the Type-C USB power cable provided inside the package with DC 5V power adapter (1A-1.5A) to charge . -
Battery Level
Show battery level (press any button to know current battery level) -
0~25%
-
25%~50%
-
50%~75%
-
75%~100%
-
Detachable Clip
-
USB
Insert U flash drive to play songs. (compatible with most brands) -
TF card
Insert IF card to play songs. (compatible with most brands)
Enjoy
FCC
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference.
Changes or modifications not expressly approved by 1Mii Ltd. will void the
user’s authority to operate the equipment. This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected.
- Consult the manufacturer or an experienced radio/TV technician for help.
This product, like other radio devices, emits radio frequency electromagnetic energy and operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
CE
1Mii Ltd. hereby declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.lmii.com.
In accordance with Article 10(2) and Article 10(10), this product is allowed
to be used in all EU member states.
Shenzhen lMii Technologies Limited
Baoan District, Shenzhen 518100 China
EU Importer:
eVatmaster Consulting GmbH
Bettina. 30,60325 Frankfurt am Main, Germany
Warranty
Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.
Disposal
Always dispose of the used appliance at a recycling centre. Do not dispose the used appliance together with household waste.
eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main,Germany
contact@evatmaster.com
Scan the code to get more information.
Manufacturer: ShenZhen Ankbit Electronics Limited
Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St.,
Baoan Dist., Shenzhen, China
Operator: ShenZhen 1Mii Technologies Limited
Address: Qianhai Complex 4201, Qianwan Road 1, Qianhai Shenzhen-Hong Kong
Cooperation Zone, Shenzhen, China
We hope you never have the need, but if you do, our service is friendly and hassle-free.
support@lmii.com
web: www.lmii.com
FCC ID: 2AUFR-RT5302