1Mii RT230 Long Range Bluetooth 5.0 Transmitter Receiver User Manual

May 15, 2024
1Mii

1Mii logo1Mii RT230 Long Range Bluetooth 5.0 Transmitter Receiver -
Symbol Bluetooth
Transmitter and Receiver 2-in-1
Model: Bo303

User Manual

RT230 Long Range Bluetooth 5.0 Transmitter Receiver

In the box

1Mii RT230 Long Range Bluetooth 5.0 Transmitter Receiver - in the
box

A. Bluetooth adapter
C. Optical cable
E. 3.9mm to RCA cable| B. 5V power cable
D. 3.5mm audio cable
F. User manual
---|---

Product overview

1Mii RT230 Long Range Bluetooth 5.0 Transmitter Receiver -
Overview

Basic operation

1Mii RT230 Long Range Bluetooth 5.0 Transmitter Receiver - Basic
operation

TX mode

1Mii RT230 Long Range Bluetooth 5.0 Transmitter Receiver - TX
mode

2. Power on 1Mii RT230 Long Range Bluetooth 5.0 Transmitter Receiver -
Power on| 3. Pair| 4. Play
---|---|---

RX mode

1Mii RT230 Long Range Bluetooth 5.0 Transmitter Receiver - RX
mode 2. Power on1Mii RT230
Long Range Bluetooth 5.0 Transmitter Receiver - Power on
2

3. Pair 4. Play

Bypass mode (Non – Bluetooth)

1Mii RT230 Long Range Bluetooth 5.0 Transmitter Receiver - Bypass
mode1Mii RT230 Long Range
Bluetooth 5.0 Transmitter Receiver - Bypass mode 2

Support Bluetooth & Wired Simultaneously
B310Pro allows user use to the Bluetooth & Wired at the same time, allows the user to pair & connect the B3l0Pro in between the TV and the Soundbar (or Sound system) to share the same optical / audio output port on TV while being able to get audio through both devices simultaneously. This allows the headphone user to listen at a different volume level;
NOTE: Bypass can only work with the same type of input / output i.e. AUX input to AUX output or OPT input to OPT output.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by IMii Ltd. is under license. Other trademarks and trade names are those of their respective owners.

FCC:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference.
Changes or modifications not expressly approved by IMii Ltd. will void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected.
  • Consult the manufacturer or an experienced radio/TV technician for help.

This product, like other radio devices, emits radio frequency electromagnetic energy and operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

CE
1Mii Ltd. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
The full test of the EU declaration of conformity is available at the following internet address: www.1mii.com
In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all £U member states.
ShenZhen IMii Technologies Limited
Baoan District, Shenzhen 518100 China
EU Importer:
evatmaster Consulting GmbH
Bettinastr. 30,60325 Frankfurt am Main,Germany

Warranty
Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.

Disposal
Always dispose of the used appliance at a recycling centre.
Do not dispose the used appliance together with household waste.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.

1Mii logo

eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main,Germany
contact@evatmaster.com

https://1mii.com/download-2/
Scan the code to get more information.

Manufacturer: ShenZhen Ankbit Electronics Limited
Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St., Baoan
Dist, Shenzhen, China
Operator: ShenZhen IMii Technologies Limited
Address: Qianhai Complex A201, Qianwan Road 1, Qianhai Shenzhen-Hong
Kong Cooperation Zone, Shenzhen, China
We hope you never have the need, but if you do, our service is friendly and hassle-free.
support@1mii.com web: www.1mii.com
FCC ID: 2AUFR-RT230

MADE IN CHINA

Documents / Resources

| 1Mii RT230 Long Range Bluetooth 5.0 Transmitter Receiver [pdf] User Manual
RT230, RT230 Long Range Bluetooth 5.0 Transmitter Receiver, Long Range Bluetooth 5.0 Transmitter Receiver, Bluetooth 5.0 Transmitter Receiver, Transmitter Receiver, Receiver
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals