1Mii 2.4G Wireless Microphone System User Manual
- June 4, 2024
- 1Mii
Table of Contents
2.4G Wireless Microphone System
User Manual
Product specifications
1Mii M4 is a 2.4G Wireless microphone system. The microphone is suitable for a fitness coach, aerobics coach, Yoga coach, Pilates coach, water sports, gym teacher, teacher, speech, YouTube video/audio recording, and so on.
Package Contents
- Transmitter with Microphonex1
- Headset Holder/Supportxl
- USB Charging cablex1
- Windscreen Foamx2
- 6.35mm Adapterxl
- Receiver x1
- User Manual X
Product overview and control features
Installation diagram
Please Read the Instruction Manual Carefully Before Use So That the Microphone
Can Work Well With Your Device
Indicator lights flash
Match failed. Please turn off the transmitter & receiver, then turn on them
simultaneously. The indicator light changes from flashing to blue light after
a successful match, you can use it.
No sound
- Match failed. Please check the indicator light, the transmitter & receiver need to rematch if it keeps flashing.
- The battery may be running out of power. Please fully charge before using.
- For smartphones and computers, please use the Y splitter and headphones to monitor real-time audio. Or you can unplug the microphone from your phone and press “plays to listen to your recording.
- For speakers and other PA devices, please use the “MIC” socket, not the “AUX” socket and not suitable for device power is less than 15W
Faint voice
- The wrong way to wear it. Make sure there is nothing to cover the mic condenser. Keep the mic away from the sound source about 8-10inchs
- Check the volume setting. You can increase the volume of the transmitter and device.
- The device power is too low (below 100W), such as the Bluetooth speaker with the AUX input.
Noise
- Please check if there is a strong magnetic field or sound waves or wireless interference.
- The mic didn’t wear the windscreen foam. Plz, use the supplied windscreen foams, which can effectively minimize wind noise and vocal plosives.
Howling
- Please check the position of the speaker. Do not point the microphone directly at the speaker.
- Try turning off the reverb and turning down the volume.
Intermittent sound
- The battery may be running out of power. Please fully charge before using.
- Please check if there is strong Wi-Fi signal interference around.
CAUTION
- Do not point the microphone directly at the speakers to prevent howling. Use the microphone within narrow spaces, and adjust the volume not too high
- For speakers and other PA devices, please use the “MIC” socket, not the “AUX” socket. The microphone is not suitable for devices with less than 15W power.
- When the microphone can’t be used for your laptop to record, you can download Adobe Audition.
- Fully charge the transmitter and receiver before use. Turn off the transmitter and receiver when the microphone isn’t used.
eVatmaster Consulting
GmbH Bettinastr. 30
60325 Frankfurt am Main, Germany contact@evatmaster.com
Scan the code to get more information.
https://1mii.com/download-2/
Manufacturer: Shenzhen Ankit Electronics Limited
Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St., Baoan
Dist., Shenzhen, China
Operator: ShenZhen 1Mii Technologies Limited
Address: Qianhai Complex A201, Qianwan Road 1, Qianhai Shenzhen-Hong Kong
Cooperation Zone, Shenzhen, China
We hope you never have the need, but if you do, our service is friendly and
hassle-free.
support@1mii.com
web:www.lmii.com
**FCC ID: 2AJU3RT727
MADE IN CHINA
**