Shenzhen 1mii Technologies 806T3 Bluetooth Receiver User Manual
- June 5, 2024
- Shenzhen 1mii Technologies
Table of Contents
Shenzhen 1mii Technologies 806T3 Bluetooth Receiver
ln the box
Basic operation
Pair and connect
- Put BO6T3 with your phone as close as possible
- Press the bil/e button for 1 seconds.while LED light flashing between red and blue,B06T3 is in pair mode.
- Activate the Bluetooth of the mobile phone/computer/tablet, click “BO6T3 to connect, and wait for the pairing to succeed.
- Plug the B06T3 TO your speaker or soundbar or amplifier through audio cable packed in box.
How to enter pairing mode?
Press the /® button for I seconds, whiie LED light flashing between red and
blue, B06T3 with enter into pair mode.
Reset device
If the receiver cannot be paired or work properly, please do following method
to reset the device:
Press and hold the i/® button for 10 seconds until the light flash purple
quickly about 3 times.Ihat means the device has been reseted.
LED INDICATOR
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by IMii Ltd. is under license. Other trademarks and trade names are those of their respective owners.
FCC rules
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference. Changes or modifications not expressly approved by IMii Ltd. will void the users authority to operate the equipment. This equipment has been tested and found to comply with the limíts for a Class B digital device, pursuant to part l5 of the FCC Rules Ihese limits are designed to provide reasonable protection against harmful interference lin a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful|interference to radio commnu- nications. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an electrica outlet on a different circuit to that which the receiver is connected.
- Consult the manufacturer or an experienced radio/TV technician for help
This product, electromagnetic energy and operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific other radio devices, community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
Warranty
Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damag es that did not ocCur during shipping. repairs and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This Warranty does not include shipping
Disposal
Always dispose of the used appliance at a recycling centre. Do not dispose of the used appliance together with household waste.
RF Expasure Infarmatian
This equipment complies with FCC radiation exposure limits set farth far an
uncontrolled environment. This equipment shauld be installed and operated with
a minimum distance 20cm between the radiator and yaur bady.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>