1Mii B06Pro+ Wireless Audio Adaptor User Manual
- June 4, 2024
- 1Mii
Table of Contents
Wireless Audio Adapter
User Manual
In the box
Product Overview
1. Pairing
2. volume- / Previous track
3. Power ON/OFF On
4. volume+ / Next track
5. Play / Pause
6. Pair the #1 device| 7. Pair the #2 device
8. Play / Pause
9. Volume level
10. Track name
11. Sampling rate
12. Bluetooth protocol
---|---
Basic operation
Control functions
Instructions
- Connect the power amplifier or active speaker to BO6Pro+ through “AUX/Optical/ Coaxial’port.
Power on
a. Connect the BOGPro+ to the power cable, and it will automatically turn on.
b. Long press the button to turn on. (in the shutdown state)
Pairing
- First-time use: BOGPro+ automatically enters the pairing mode after power-on .(the , icon flashes on the display screen)
- Long press button for 2s to enter the pairing mode. (the icon flashes on the display screen)
- Activate Bluetooth on your phone or another device and click “BO6Prot” to connect.
- Wait and connect (For quick pairing, better keep them within | meter ).
How to pair and connect two devices simultaneously?
- Long press button for 2s to enter the pairing mode again. (the icon flashes on the display screen)
- Activate Bluetooth on the second device and click “BO6Pro+’ to pair.
Note: You can only play music on one device at a time. You need to pause the music on your device first to play music on the other one.
Restore factory settings
- Press the and buttons together for 5s to reset the device.
- Bluetooth Version: BT 5.1
- Audio codec: SBC /MP3/AAC/aptx/aptX-LL/aptx-HD/ aptX-adaptive/LDAC
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by IMii Ltd. is under license. Other trademarks and trade names are those of their respective owners.
FCC:
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference.
Changes or modifications not expressly approved by IMii Ltd. will void the
user’s authority to operate the equipment. This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected.
- Consult the manufacturer or an experienced radio/TV technician for help.
This product, like other radio devices, emits radiofrequency electromagnetic energy and operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
CE
IMii Ltd. hereby declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.1mii.com
In accordance with Article 10(2) and Article 10(10), this product is allowed
to be used in all EU member states.
Shenzhen IMii Technologies Limited Baoan District, Shenzhen 518100 China
EU Importer:
eVatmaster Consulting GmbH
Bettina. 30,60325 Frankfurt am Main, Germany
Warranty
Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.
Disposal
Always dispose of the used appliance at a recycling centre. gum DO not
dispose the used appliance together with household waste.
Qualcomm aptx is a product of Qualcomm Technologies, Inc. and/or its
subsidiaries.
eVatmaster Consulting GmbH EC Bettinastr. 30
60325 Frankfurt am Main, Germany
contact@evatmaster.com
Scan the code to get more information.
Operator: ANKBIT INTERNATIONAL LIMITED
Address: ROOM 803, CHEVALIER HOUSE, 45-51 CHATHAM ROAD SOUTH, TSIM SHA
TSUI, KOWLOON, HONG KONG
Manufacturer: Shenzhen Ankbit Electronics Limited
Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St.,
Baoan Dist., Shenzhen, China
We hope you never have the need, but if you do, our service is friendly and
hassle-free.
support@Imii.com web:
www.1mii.com
FCC ID: 2AUFR-RT977
MADE IN CHINA
Documents / Resources
| 1Mii
B06Pro+ Wireless Audio
Adaptor
[pdf] User Manual
B06Pro Wireless Audio Adaptor, B06Pro, Wireless Audio Adaptor, Audio Adaptor,
Adaptor
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>