1Mii B10 USB Wireless Audio Adapter User Manual
- June 5, 2024
- 1Mii
Table of Contents
1Mii B10 USB Wireless Audio Adapter User Manual
In the Box
Product Overview
- Step 1: The first time you plug B10 into the USB port of your computer, it will install compatible drivers automatically.
- Step 2: Set Bl0 to enter Pairing Mode: The first time you use it, it will automatically enter pairing mode with the LED alternately flashes blue and red. If no, please press and hold the MFB button for 2 seconds.
- Step 3: Make sure your headphone/speaker enters Pairing Mode. (Please refer to your headphone/speaker user manual for details.) Get your headphone/speaker close to Bl0 to complete Pairing until the LED stops flashing.
Connect to the second device:
- After the first device is paired with Bl0, please press and hold the MFB button for 2 seconds again to enter Pairing Mode, the LED will flash blue and red alternately.
- Make sure your second headphone/speaker enters Pairing Mode. Get your second headphone/speaker close to Bl0 to complete pairing until the LED stops flashing.
Control Functions
Note: Please use a headphone which supports aptx Low latency or aptx HD.
Make a VOIP call: Double click MFB to enable TALK MODE, LED flashes Blue quickly. (Once the call has finished, double click MFB again to return to music streaming).
Computer Set
- Step 1. Right-click the speaker icon in the bottom right corner of the screen. And select “playback devices”.
- Step 2. Set “B10” as the “default device”.
LED Indicator
|
Status
---|---
| Flashes blue and red alternately| Pairing mode
| Stays white (red+green+blue)| Connected with aptX-LL codec
| Stays green| Connected with aptX-HD codec
| Stays cyan (green +blue)| Connected with aptX codec
| Stays yellow (red +green)| Connected with fast stream codec
| Stays blue| Connected with SBC codec
3s
| Flashes blue once every 3s| Disconnected
2s
| Stays purple(blue+red) 2s then off| Connected 2 devices
| Flashes blue| Call mode
2s
| Stays white 2s (red+green+blue)| Restored factory default settings
*Important Note:
- This product is not suitable for TV/car.
- For the better operation range, please do not plug B10 into the back of the computer. We suggest using the CSR headphones for optimal Bluetooth stability and range.
- An unclean USB port may cause abnormal sound. If it produces abnormal sound, please clean the USB port.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by 1Mii Ltd. is under license. Other trademarks and trade names are those of their respective owners.
FCC
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference. Changes or modifications not expressly approved by lMii Ltd. will void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected.
- Consult the manufacturer or an experienced radio/TV technician for help.
This product, like other radio devices, emits radio frequency electromagnetic energy and operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
CE
1Mii Ltd. hereby declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.lmii.com
In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.
Shenzhen 1Mii Technologies
Limited Baoan District, Shenzhen 518100 China
EU Importer:
eVatmaster Consulting GmbH
Bettina. 30,60325 Frankfurt am Main, Germany
Warranty
Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.
Disposal
Always dispose of the used appliance at a recycling centre. Do not dispose the
used appliance together with household waste.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its
subsidiaries.
eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main,Germany
[email protected]
Scan the code to get more information.
Manufacturer: ShenZhen Ankbit Electronics Limited
Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St.,
Baoan Dist., Shenzhen, China
Operator: ShenZhen lMii Technologies Limited
Address: Qianhai Complex A201, Qianwan Road 1, Qianhai Shenzhen-Hong Kong
Cooperation Zone, Shenzhen, China
We hope you never have the need, but if you do, our service is friendly and
hassle-free.
[email protected] web:
www.1mii.com
FCC ID: 2AUFR-B10