1Mii DS601 Desktop Audio Decoder User Manual

June 4, 2024
1Mii

1Mii DS601 Desktop Audio Decoder

About Product

Lavaudio Ds601 is a high-performance desktop DAC with USB, Coaxial, Optical, Bluetooth input and 3.5mm/RCA output. USB of Ds601 supports up to PCM 32blt/768kHz and DSD512(Native). DS601 comes with complete digital volume control and OLED display, so t can serve as “DAC+Pre-amplifier. We believe that Lavaudio DS601 will bring you more HiFi music experience and fun.

Specifications

Product Parameters

What’s In the Box

Product Overview

Control Function

USB Mode
  1. Plug in the DC power supply device to turn on Ds801 and connect it with a USB cable to the computer, then use the RCA cable to connect to other devices such as audios or
    power amplifiers.

  2. Click the button to select the Input mode USB.

  3. Adjust an appropriate volume to enjoy HiFi music
    Note: For Windows users, the driver needs to be Installed when using it for the first time. Please refer to DS601 Driver & Installation Guide’ and ‘DS601- Player Foobar2000 & JR.

BT Mode
  1. Plug in the DC power supply and DS801 will automatically turn on. Use the RCA cable to connect to other devices such as speakers or power amplifiers.
  2. Click the button to select the input BT mode
  3. Turn on the Bluetooth on your mobile phone and pair it with ‘Ds601 to enjoy HIFI music. out mode BT.

System Setting Interface

  1. Filter mode when playing PCM format, MODE1-MODE7.
    MODE1: Apodizing fast roll-off filter
    MODE2: Linear phase fast roll-off filter
    MODE3: Linear phase slow roll-off filter
    MODE4: Minimum phase fast roll-off filter
    MODE5: Minimum phase slow roll-off filter
    MODE6: Corrected minimum phase fast roll-off fliterMODE7 brick wall filter

  2. Bluetooth system settings

  3. Screen saver settings Optional screen always on and automatic screen off

  4. Factory data reset The default values of the system parameters of l-3are: MODELBIuetooth on Automatic screen off.
    Note: When entering the system parameter setting interface it will automatically exit it f there is no operation after 10 seconds

Troubleshooting

Daily Use

  1. Never pull out the USB cable while connected to a computer and using the audio output
  2. The output signal of this machine must not be grounded or shorted.
  3. Do not leave the machine in a high temperature and humid environment, let it rain or drop it.
  4. Never open the case by yourself. The machine should be repaired by 1Mii Service.
  5. This machine is intended for indoor use only. The product driver and electrons: full manual can be downloaded from www.1iml.com.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by IMii Ltd. is under license. Other trademarks and trade names are those of thelr respective owners.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any Interference. Changes or modifications not expressly approved by IMii Ltd. will void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to connect the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected.
  • Consult the manufacturer or an experienced radio/TV technician for help.

This product, like other radio devices, emits radiofrequency electromagnetic energy and operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

CE
IMii Ltd. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity Is available at the following internet address: www.1mi.com In accordance with Article 10 (2) and Article 10 (10), this product is allowed to be used In all EU member states. Shenzhen I Technologies Limited Baoan District, Shenzhen 518100 China
EU Importer: Vatmaster Consulting GmbH Bettina. 30,60325 Frankfurt am Main, Gemany.

Warranty

Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the Instructions, as well as damages that did not occur during shipping, repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.

Disposal

Always dispose of the used appliance at a recycling center Do not dispose of the used appliance together with household waste. Qualcomm aptx is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.

TND+N Radio

SNR

RMS Level

Scan the code to get more information.

Manufacturer: Shenzhen Ankblt Electronics Limited
Address: Runfeng Industrial Park No. 4197 Baoan Blvd, Xiang St, Baoan Dist, Shenzhen, China
Operator: ShenZhen Iii Technologies Limited
Address: Qlanhal Complex A201, QNanwan Road , Qlanhal Shenzhen-Hong Kong Cooperation Zone, Shenzhen, China
We hope you never have the need, but if you do, our service is friendly and hassle-free. Support@1mii.com
web: www.1mii.com
FCC ID: 2AUFR-DS601

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals