HARPER TVT-5530 Tilt TV Wall Mount Instruction Manual
- June 4, 2024
- HARPER
Table of Contents
HARPER TVT-5530 Tilt TV Wall Mount
INTRODUCTION
Thank you for choosing HARPER products. Before use, please study the given user manual and keep it for future references.
CONTENTS OF DELIVERY
- Wall plate
- Vertical profiles
- Fasteners
- Built-in bubble level
- User manual
- Warranty card
TECHNICAL PARAMETERS
- Maximum load 30kg
- VESA up to 400x400mm
- Distance to wall 50mm
- Mount supports diagonal LED / LCD TVs from 26″ -55″
- Tilt angle change -5 °/15 °
SAFETY INSTRUCTIONS
- Do not disassemble the devise.
- It may lead to malfunction.
- In case of malfunction please contact authorized service centre.
- Do not leave devise and accessories unattended. Please keep it out of reach of children and animals. Small parts can become cause of suffocation.
- The devise is intended for use in normal climate conditions. Extreme climate conditions (temperature below 0°C or above 45°C or high humidity) can become reason of malfunction of device.
PARTS LIST
Please check the parts in the package in comparison with the following list, make sure all of the parts are in the package. Never use defective parts, never replace part with different specification.
M4x1 6 ( 4) screws
M-A
|
Shim (4)
M-D
---|---
M6x16 (4) screws
M-B
|
Expansion Tube (4)
W-A
Heightening column (4)
M-C
|
Expansion Nail (4)
W-B
INSTALLATION AND OPERATION INSTRUCTIONS
NOTE: Please read the instructions carefully before installing.
Step 1. With the wall plate propped against the flat surface of the wall,
mark the holes using a level and pencil (Fig. 1 a, 1 b)
For installation on a wall made ofwood or chipboard, drill holes with a
diameter of 4 mm to a depth of 50 mm. Secure the wall plate with the self-
tapping screws (W-A) provided (the dowel is not used). For installation on a
concrete or brick surface, drill holes with a diameter of 10 mm to a depth of
50 mm. Drive the supplied dowel (W-B) into each drilled hole and secure the
wall plate with the self-tapping screws (W-A).
Step 2. Install the vertical profiles on the TV/monitor in accordance with the VESA standard using screws (M-A, M-B), shims (M-D) and heightening columns (M-C), if necessary (Fig. 2a, 2b).Note: When using screws (M-8), shims (M-0) are not used.
Step 3. Install the TV / monitor with fixed vertical profiles on the wall plate and adjust the angle of inclination. At the end of the adjustment, tighten the locking screws on the vertical profilesfrom the bottom.
NOTICE
Your device is designed and manufactured from high-quality materials and components that can be recycled and reused. If the product has a symbol with a crossed-out wheelie bin, it means that the product complies with the European Directive 2002/96/EC. Check out the local system for separate collection of electrical and electronic goods. Follow local rules.Dispose of old devices separately from household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health. Due to constant improvement of technical characteristics and design, manufacture has the right to make changes without prior notice. Note: This product doesn’t contain precious metals
lilt TV Wall Mount
TVT-5530
Information about certification: the product is not subject to compulsory
certification
Production date is indicated on the package
Life duration of product: 24 months
Warranty period: 12 months
Warranty service is provided on the base of warranty card that goes together
with the product. Warranty card and User manual are inevitable parts of the
product. For additional information about the product and authorized service
centers, you may find at harper.ru or by telephone
8-800-600-7107.
Manufacture: Harper International Trading Limited 15F, Radio City, 505
Hennessy Road, Causeway Bay, HongKong, PRC
Importer: LLC «Progress-Plyus», App.11, floor 2, Build.SO, k.1, Udaltsova
Str., Moscow, Russia, 119607, tel: +74951330210,
info@harper.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>