1Mii B06HD+ Wireless Bluetooth Audio Receiver User Manual
- June 5, 2024
- 1Mii
Table of Contents
B06HD+ Wireless Bluetooth Audio Receiver
User Manual
In the box
Product overview
| (1) Pairing | (7) Play /Pause |
|---|---|
| (2) Volume – / Previous track | (8) volume level |
| (3) Volume +/ Next track | (9) Battery level |
| (4) Power ON/OFF | (10) 1oack name |
| (5) Pair the first device | (11) sampling rate |
| (6) Pair the second device | (12) Bluetooth protocol |
Basic operation
Control functions
Instructions for operation:
Connect the power amplifier or active speaker to the B06HD RCA/Optical/ Coaxial port
Power on
a.Connect the B06HD+ to the DC5V interface with a charging cable, and it will
automatically turn on
b. tong press the button to turn it on. (when the charging cable is not
connected)
Pairing
– First-time use B06HD+ automatically enters the paining mode after power -on.
(the icon flashes on the display screen)
Afterward: tong press button for 2s to enter the pairing mode icon flashes on
the display screen)
Activate Bluetooth on your phone or another device and click B06HD+to
connect+wait and connect (For quick pairing. better keep therm within I meter
when pairing)
4) Pair with the second device
- Long press the button for 2s to enter the pairing mode again (the icon flashes on the display screen)
- Activate Bluetooth on the second device and click BO6HD+ to pair
Note: You can only play music on one device at a time. You need to pause the music on your device first to play music on the other one.
5)Restore factory settings
Press the and buttons together for Ss to reset the device
- Bluetooth Version BT 5.0
- Audio codec: SBC/MP3/AAC/optx/ aptx-t/ optx-HD/LDAC
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Mi Ltd. is under license. Other trademarks and trade names are those of their respective owners
FCC:
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference Changes or
modifications not expressly approved by IMii Ltd. will void the user’s
authority to operate the equipment. This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to part I5 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation, This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures
- Reorient or relocate the receiving antenna
- increase the separation between the equipment and receiver
- Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected
- Consult the manufacturer or an experienced radio/Ty technician for help.
This product, like other radio devices, emits radio frequency electromagnetic energy and operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature
CE
Mi Ltd. hereby declares that this product is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/Eu
The full text of the EU declaration of conformity is avoidable at the
following internet address: www.mi.com
In accordance with Article 10(2) and Article 10(0), this product is allowed to
be used in all EU member states
Shenzhen Mi Technologies Limited Baoan District, Shenzhen 518100 China
EU Importer
eVatmaster Consulting GmbH Bettina. 30,60325 Frankfurt am Main, Germany
Warranty
Warranty service is limited to normal use. Any man-made damages such as from
connecting to an unsuitable power source, using an unsuitable device, or not
following the instructions, as well as damages that did not occur during
shipping. repairs, and adjustments not approved by the company. damages from
misuse, inattention, or improper installation may Couse the warranty to be
ineffective immediately. This warranty does not include shipping fees
Disposal
Always dispose of the used appliance at a recycling center
Do not dispose of the used appliance together with household waste
eV0troaster Consulting GmbH
Bettinostr 30
60325 f0nkturt arn Main,Germon
contact@ovatroster.coon
Scan the code to gate more information.
Manufacturer Shenzhen An#bit Electronics Limited
Address Runfeng industrial Pork, No. 4197 B00an Blvd, Xi6dang St., Ba0an
Dist, Shenzhen, China
Op6rotor Shenzhen Mi Technologies Limited
Address Qianhai Complex A201 Qionwan Rog I, Nanhai Shenzhen-Hong
Kong Cooperation Zone, Shenzhen, Ching
We hope you never have the need, but if you do,
our service is friendly and hassle-free
support@1mil.com web:
www.1mil.com
FCC ID: 2AUFR. RT5003