PYLE PBMSPG190 Street Blaster Wireless BT Streaming Boom Box Speaker System User Manual

: June 6, 2024
: Pyle

Table of Contents

PACKAGE CONTAINS
FEATURES
CHARGING THE SPEAKER
CONNECTIONS
REMOTE CONTROL
FRONT PANEL FUNCTIONS
BUILT-IN 4.0 BT FUNCTION
FM FUNCTION
TROUBLESHOOTING
MAIN TECHNICAL SPECIFICATION
Questions? Issues?
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PYLE PBMSPG190 Street Blaster Wireless BT Streaming Boom Box Speaker System User Manual

WARNING

DO NOT place objects on top of the device, as objects may scratch the device.
DO NOT expose the device to dirty or dusty environments.
DO NOT insert any foreign objects into the device
DO NOT expose the device to strong magnetic or electrical field
DO NOT use the device in the rain.
Please check with your Local Authority or retailer for proper disposal of electronic products.
DO NOT disassemble the device. Only a certified service technician should perform repair.
The device has apertures to disperse heat.
DO NOT block the device ventilation, the device may become hot and malfunction as a result.

Illegal operation may cause personal injury, which could be fatal.
Illegal operation may cause damage to property.

PACKAGE CONTAINS

1x Remote Control
1x Power Adapter
1x Warranty Card
1x Carrying Belt
1x User Manual
1x Wired Microphone
1x FM Antenna
1x FM Soft Antenna (for weak signal area)

FEATURES

This system includes one microphone and can be used with personal
computers, mobile phone, DVD, VCD, CD, LD, TV, MP3, radio, electronic piano and any devices which have audio output. Amplifier circuit are using high- performance, high-fidelity design, coupled with high-quality professional speaker, in order to make the sound field to get positioned so clear, distinct levels effect.
The sound system is outstanding, with deep and powerful bass and the treble effect is strong, with clear and bright pitch.
The professional electronic frequency division circuit enhances the machine’s crossover point effect.
Using professional design and manufacture of high-capacity batteries, and dedicated audio power capacitors, to make the speaker‘s power reserve margin larger, more stable, better dynamics, higher signal to noise ratio.

CHARGING THE SPEAKER

When charging, connect a matched power adapter to AC100V- AC240V. Charging time is approximately 6 to 10 hours. Once fully charged unplug the power supply as leaving a full battery on charge for a long time may cause damage to the battery

BATTERY CHARGE INDICATOR:

LED panel has battery status indicator. In the middle of the shape of the battery have three horizontal lines, each horizontal line represents 33% of electricity remaining. When no horizontal line in the shape of the battery or the shape flashes, please power off and promptly charge to avoid damage to the battery. There is a battery charging indicator light on the front panel. When charging, the red light will be on. When it’s fully charged, the indicator light will turn into green.

WARNING:

If the battery is under voltage, please fully charge it within 48 hours. If the speaker has to be left unused for a long time, please let the battery fully charged, otherwise it will cause damage to the battery. In the process of playing, keep unit away from high temperature environments, high magnetic fields and high frequencies.

CONNECTIONS

REMOTE CONTROL

POWER OFF ONLY
CHOOSE SIGNAL INPUT
INCREASE MUSIC VOLUME
MENU
PREVIOUS LED MODE
DECREASE MUSIC VOLUME
NEXT LED MODE
MUTE
REPEAT
PLAY/PAUSE KEY
PREVIOUS SONG/CHANNEL
NEXT SONG/CHANNEL

Under normal circumstances, the remote control should aimed directly at the receiving window of the remote control within about 4 meters and with in a 30° angle.
When operating the remote control, aim the remote control at the receiving window. Ensure that there are no obstacles between the remote control and the unit.
If the remote receiver is in a position to directly receive glare, it may fail. In this case, move the speaker away to avoid direct sunlight.
Avoid mixing old and new batteries. Replace the remote control batteries regularly.

FRONT PANEL FUNCTIONS

Short press to power ON the unit, short press for input selection (Line/FM/Bluetooth/USB); Press and hold to power off the unit.
Short press to choose menu mode Treble/Bass/Mic volume/Mic echo volume/Guitar volume/LED mode/Music volume selection as below description:
H (-14—+14) Music “treble” volume adjustment,
b (-14—+14) Music “bass” volume adjustment,
N1 (00—30) microphone volume adjustment,
EC (0—10) microphone echo volume adjustment,
N2 (00—30) guitar volume adjustment,
LED (1—8—off) choose for different LED light mode
U (0—30) music main volume adjustment
Short press to select one on MENU mode then use No.6 Volume knob to adjust it. Press and hold to control USB/FM as below:
- When in USB/BT mode, press and hold to play/pause the music;
- When in FM mode, press and hold to scan FM channel automatically.
Wired Mic Slot
Guitar Slot
Reset
Adjust Music volume/Treble/Bass/Mic volume/Mic echo volume/Guitar volume/LED mode.
Short press to select previous song on USB mode. On FM mode, short press to adjust FM-0.1. Press and hold for 5 seconds to select next channel.
Short press to select next song on USB mode. On FM mode, short press to adjust FM+0.1, press and hold for 5 seconds to select next channel.
USB Slot.
Line IN- Connect with personal computer, mobile phone, DVD, VCD, CD, LD, Mp3, radio, electronic piano and any device that has audio output in AUX mode.
Battery Indicator. Red light-charging; Green light-full.
DC 13.5V charging interface.

BUILT-IN 4.0 BT FUNCTION

Press “POWER / INPUT” button to choose the input signal source as BT channel when starting the machine.
Please ensure the BT devices you want to connect is open. Then scan and connect the speaker with the device. When the connection is successful, “tick” tone will prompt. If the speaker can’t be connected, please restart the speaker or the device and try again.
After the mobile phone and the BT are successfully connected, you can play music. To ensure continuous stability of the music signal, try to keep the BT and the mobile phone facing one another.
This unit supports iPad, iPhone, Samsung, HTC, MOTOROLA, Nokia and other BT mobile devices wirelessly transmitting audio.
The BT of the unit can be used up to 10 meters if there are no barriers.

FM FUNCTION

Press “POWER / INPUT” button to switch to FM radio.
Press and hold “MENU / ” for 5 seconds for automatic searching and saving.
Short press ” ” and ” ” to select FM station manually.
Press and hold ” ” and ” ” for 5 seconds to select the last or next channel directly.

TROUBLESHOOTING

Fault	Possible Cause	Solution
No sound	No input sound source	Use a better music signal
Volume is too low	Adjust volume
Distortion of sound	Volume too high	Turn down the volume
Speaker may be damaged	Repair or replace it
Karaoke does not work	Microphone plug is not fully inserted.	Plug microphone

properly into the socket
Microphone switch is not on| Turn on microphone switch
Microphone volume knob is at the lowest position| Adjust microphone volume properly
Wireless microphone has low battery| Replace battery
MP3 does not play| The song format in the U disc is incorrect| Transform song format into Mp3 format
Improper operation has caused a process disorder| Reboot the machine
USB disc is disconnected| Insert USB disc properly

MAIN TECHNICAL SPECIFICATION

Peak Power: 300W
Input Sensitivity: 200mV
Frequency Response: 55-160KHz
Power Supply: AC100V- AC240V, 60Hz/50Hz

Above specifications are the specifications of the sampling machine and are for reference purpose only.
Due to continuous product development, specifications may be subject to change without prior notification.