MONI 9694 Violette Foldable Doll Stroller User Manual
- June 3, 2024
- MONI
Table of Contents
9694 Violette Foldable Doll Stroller
User Manual
ASSEMBLY STEPS
WARNINGS
- IMPORTANT! READ CAREFULLY AND KEEP IT FOR FUTURE REFERENCE!
- THE USER MANUAL CONTAINS IMPORTANT INFORMATION ON THE ASSEMBLY, CORRECT USE, AND MAINTENANCE OF THE PRODUCT. THE DOLL PRAM COMPLIES WITH THE REQUIREMENTS OF EUROPEAN STANDARD EN 71-1/ 2/ 3.
- WARNING! THE SCHEMES AND FIGURES IN THIS INSTRUCTION ARE FOR ILLUSTRATIVE PURPOSES ONLY. THE PRODUCT YOU HAVE BOUGHT MAY DIFFER FROM THEIRS.
➢ WARNING!
-
To be used under the direct supervision of an adult.
-
This toy is not suitable for children under 3 years of age due to its small parts.
-
The toy is designed for carrying dolls, not babies, children, and pets!
-
Keep away from fire! Keep away from sources of heat!
-
The packaging contains small plastic parts. Choking and suffocation hazard! Do not allow children during unpacking and assembly.
-
To be assembled by an adult only! Do not allow children less than three years of age, until the stroller is completely assembled due to small parts! Choking hazard!
-
The assembly is to be performed according to the instructions in this manual, in order to guarantee the safety of your child.
-
Do not change the construction of the stroller, because this carries a risk to the safety of your child, which uses the toy!
-
The folding and unfolding of the stroller must be performed by an adult only.
-
Before each use, an adult must perform a check of the stability of the fixation of the parts and of the unfolded position of the stroller! You must periodically check the working order of the toy! There must be no damaged, loose or worn parts.
There must be no cracks in the structure. If you find any damage to the stroller, stop using it, until the problem is resolved. -
Do not allow your child to play with the stroller close to stairs, doors, heating devices and fire, pools, uneven or sloped surfaces, and similar places which may carry potential risk for injury to your child!
-
The toy must be used in places that are well-lit during the day, in order to avoid incidents.
-
Before you fold and store the stroller, you must remove the moving parts – carry cot, mama bag, and luggage basket, if there are such items.
-
The toy must be stored in a dry and well-ventilated place; do not leave it in humid places or close to sources of heat or under the harmful effects of direct sunlight, rain, wind, and snow.
-
Keep the packaging of the toy in a place that is away from the reach of your children in order to avoid the risks of suffocation and/or strangulation, resulting from the entanglement of the packaging around the child or external blocking of the airways through the mouth or nose.
ASSEMBLY INSTRUCTIONS
The assembly of the toy must be performed in compliance with the exact instructions, (FIG. 1 to 8). After each operation is performed, check and make sure that you have followed the instructions properly.
- Place the front assembled wheels at the respective openings of the front plastic parts.
- Slide the axle in the openings of the rear plastic part of the rear frame, place the ornamental plastic cap, and afterward mount the wheel, plastic fixing cap, and ornamental hubcap of the wheel. Repeat the same actions for the other rear wheel.
- Pull the handle in order to unfold the stroller.
- Place the connecting sliding parts of the canopy at the respective places in the frame of the dolls’ cot. Make sure that the sliding devices are firmly fastened and aligned.
- Place the dolls’ cot at the respective openings located on both sides of the stroller’s frame.
- 1. In order to adjust the height of the handle, press the buttons which are located on both sides of the handle and place it in the desired position.
- 2 Press down the plastic mechanism to change the position of the handle and move it to position forward or backward.
- The dolls’ cot can be transformed into a seat: remove the cot, and take its cover off; afterward switch to a seat, by locking the front and side parts at the bottom of the cot. Afterward, place the cot on the stroller’s frame.
- In order to fold the stroller, remove all moving parts from it and press the red button.
CARE AND MAINTENANCE
➢ Cleaning
-
Regularly check the working order of the individual parts.
-
Clean only the surfaces with a soft cotton cloth – dry or slightly wetted with water or soft detergent.
-
Do not wash with running water. Do not clean with detergents containing abrasive particles or aggressive agents such as acetone, ammonia, bleach, or alcohol.
-
Always dry the toy. It is possible for the mold to accumulate if the product is stored while damp.
➢ Maintenance -
Store at a dry and clean place. Do not expose to direct sunlight, rain, humidity, or sudden changes in temperature.
-
If you find any damaged or broken parts of the toy or surfaces with cracks, stop its use by children until the damage is repaired.
Made for MONI TOYS; Producer: MONI TRADE LTD; Address: Bulgaria, Sofia, Trebich, Dolo str. 1 Tel.: +359 2 / 936 07 90; www.moni.bg