MONI V7S1 Baby Stroller Florence Instruction Manual
- October 30, 2023
- MONI
Table of Contents
MONI V7S1 Baby Stroller Florence
This product is manufactured in accordance with the requirements of the Directives of the European Parliament and of the Council 2001/95 / EC “General Product Safety”, of the European Standards EN 1888-1 “Child use and care articles – Infant swings ”and EN 12790: 2009 “Child use and care articles – Wheeled child conveyances – Safety requirements and test methods” and the Consumer Protection Act.
INTENDED USAGE
This stroller “Florence” (item number V7S1) is suitable for children from 0 to
36 months and minimum weight to 15 kg. Five-point safety belt ensures safety
to the child. The positions of the backrest, footrest and canopy can be
adjusted.
The seat is installed in two positions, and it allows for the child to face
the direction of movement or against the direction of movement. The front
bumper can be removed by request. The handle is also adjustable and can be
adjusted in the desired position. The front wheel turns at 360°. The canopy
can be removed – that is how your stroller becomes in summer variant.
On the construction you can install a car seat.
WARNING! Your child will be maximally protected if you follow the warnings and
recommendations from the instructions! Pay attention to the warnings provide
all necessary in order to avoid the risk of injury or impairment of the child
if you do not provide its safety! You are responsible for the safety of the
child if you do not follow and do not comply with these warnings and
recommendations! Make sure that anyone who uses the stroller is familiar with
the instruction and follows it. Do not use parts or accessories for the
stroller, which are not approved by the manufacturer or the distributer,
because this may put your child at risk and to lead to voiding of the warranty
of the stroller.
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
WARNING!
-
Carefully read these instructions before use of the product to ensure the correct use of the stroller. Keep it for future reference.
-
Never leave the child unattended!
-
Make sure that all blocking devices are activated before use.
-
To avoid injury, make sure that your child is at a safety distance when adjusting, opening, and folding this product.
-
Do not let the child play with this product.
-
Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use.
-
Always activate the parking device (braking system) when placing and removing the child from the stroller.
Always engage the brake/parking device, while you do not hold the stroller or leave it even for a while. -
Always use the restraint system.
-
Use a harness as soon as the child can sit unaided.
-
Use the product for a child weighing less than 15 kg.
-
Use the seat for a child weighing less than 15 kg.
-
Use the basket for a child that cannot sit without someone`s help, to roll and stand up on its own, using your hands and knee support! Maximum weight of the child: 9 kg.
-
This seat unit is not suitable for children under 6 months.
-
Do not put an extra mattress thicker than 20mm in the seat.
-
Never use the seat on a stand.
-
Use the seat only on a rigid, horizontal and dry surface.
-
For a newborn baby use the lowest position of the backrest.
-
Use the function of the backrest for sitting position of the child after it reaches 6 – months of age.
-
Do not overload the stroller. Otherwise, it may upturn and the child in it may get injured.
-
Any load placed and /or attached to the handle, board, backrest, canopy and /or sides of the stroller can affect its stability! Do not place objects weighing more than 0.45kg in the canopy pocket.
-
The maximum load on the luggage basket should not exceed 3kg. Do not overload the luggage basket and do not use it to transport children in it. If you do not follow these instructions the warranty of the stroller shall be voided.
-
The maximum load of the luggage bag should not exceed 2 kg.
-
The stroller and the seat are designed to carry only one child.
-
This product is not suitable for running or skating.
-
Before use check whether the stroller is properly unfolded and whether all parts are in good working order and are fixed properly in the chosen position. Stop using it if there are worn or loose connections, damaged or missing parts.
-
Always attach the crotch belt to the waist belt for maximum protection and safety when your child starts to rise by itself on hands and knees.
-
The bumper bar should always be attached to the frame of the stroller while the child is in the stroller. Do not lift the stroller by its board, it is dangerous for the child.
-
Do not fold the stroller and do not adjust the positions of the backrest while the child is in it!
-
When the pram body is installed on the stroller, please do not disengage the folding mechanism.
-
Do not use the stroller on stairs or escalators. May lose control of the product, the child might fall and get hurt! Be careful when getting down or up on the sidewalk, pay extra attention while ascending or descending the pavement or a step. A stronger curb impact can affect the strength of the construction and the assembly.
-
Avoid using the product close to water bodies (pools, etc.).
-
Do not use on uneven terrains, gravel surfaces or grassy areas (on meadows or lawns), muddy areas.
-
Do not allow the child to stand up in the stroller, climb or hand from it.
-
The car seat does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable pram body, cot, or bed.
-
The assembly, folding and unfolding of the stroller must be performed by an adult only.
-
Do not use accessories, spare parts and other components not supplied or approved by the manufacturer!
The manufacturer accepts no liability for safety if used spare parts, different from the original ones or approved by the approved type. -
Do not make changes or modifications to the construction! If necessary, contact your supplier or an authorized service centre for advice and repair.
-
Do not place additional cords or ties on the product to avoid the risk of suffocation.
-
Do not use the product if you find any missing or damaged parts.
-
Do not allow children under 3 years of age to fully assemble the product to avoid access to small and disassembled parts.
-
Keep the plastic packaging away from children to avoid the risk of suffocation.
-
After unpacking of the product, remove all packing materials. They are not a toy, do not allow your children to play with them.
-
Keep out of fire ! Do not use the product close to direct sources of heat – heating devices, cookers or open fire.
-
Dо not store the product in humid places and in direct sunlight.
ASSEMBLY AND EXPLOITATION INSTRUCTIONS
IMPORTANT! The diagrams and figures in this instruction are illustrative
and indicative only.
Follow exactly the instructions and sequence for assembling and operating with
the product.
Check the securing of the fixation after each operation.
Fixing a certain position in most cases is accompanied by a clicking sound.
MAIN PARTS OF THE STROLLER: Frame and cot; Seat; Canopy; Armrest;
Shouldres straps; 5-point safety belt; Footrest; Front wheels; Brake pedal;
Luggage basket; Folding button; Push handle.
After unpacking, make sure that all elements, described above, are available
and in good working condition.
ASSEMBLY OF THE STRUCTURE
Illustration A – Unfolding of the stroller frame: Unhook the folding
mechanism, lift the handle until the tube locks in
place, you should hear a clicking sound.
Illustration B – Installation of front and rear wheels. Using of the brake:
-
Installing and removing the front wheels (B1 и B2): As shown in Figure B1, insert the front wheel into the front frame hole. Fix it until you hear a “click”. To remove the front wheels, press the button and the wheels are removed easily by pulling (Figure B2).
-
Assembling and removing the rear wheels (B3): As shown in Figure B3, insert the rear wheel into the hole of the rear frame. Fix until you hear a click. To remove the rear wheels, push the button and the wheels are released quickly by pulling.
-
Using of the linked brake (B4): To activate the parking device and lock the two rear wheels, press down the pedal on the rear axle (Figure 4A). To release the brake, pull up the pedal using your foot (Figure B4).
Illustration С – Seat assembly. Adjusting the footrest:
-
Seat Assembly (C1) – To install the seat, put it in the frame holes until you hear a click sound (Figure C1). To remove the seat, press the buttons on both sides at the same time. Then, pull the seat up to remove it.
-
Adjusting the footrest (C2) – As shown in Figure C2, move the step up and the angle can be adjusted. To adjust the footrest, hold the button on both sides for its release.
Illustration D – Attaching the safety board. Adjusting the position of the handles:
-
Attaching the safety board (D1): Insert both ends of the safety board into the two side holes of the frame. Secure the guard until you hear a click (Figure D1). To remove the guard, press the release button on both sides of the frame and pull at the same time.
-
Adjusting the position of the handles(D2): As shown in Figure D2, the position of the handles can be adjusted by pressing the two side buttons of the frame and moving the handle to the desired position.
Illustration Е – 5-point safety belt: Follow the steps, described in
Figure Е. To attach the belt, insert the two tabs of the lap belt into the
buckle on both sides, should click when properly inserted. The shoulder straps
are fitted as the metal tabs are assembled and inserted into the buckle. The
sliding adjusters are fitted and must be carefully adjusted on each side so
that the belt is fastened around your child without causing discomfort. To
release the bely, press the buckle button, and pull to open.
Illustration F – Changing the direction of carry cot: To change the
direction of the carry cot press the button as shown in Figure F. Pull out the
carry cot, then turn it over to the desired direction and put it back into the
designated holes.
Illustration G – Folding of the stroller frame: Before folding the
stroller, you must engage the parking device, fold the canopy, and empty the
luggage basket. Then follow the sequence of steps described in Figure G. Press
the thumb and push button on the pushchair folding mechanism at the same time.
Push the handle forward until the stroller folds. Remove the handle.
Attention! When closing the trolley, make sure your child or other
children are kept at a safe distance. Make sure the moving parts of the
trolley do not come in contact with your child during these operations. Before
closing the cart, make sure the luggage basket is empty.
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
-
Regularly check the locking devices, brakes, safety belts and buckles, connectors, and fixing mechanisms in order to be sure that they are in good working order and are not worn or damaged.
-
If you find loose, broken, and damaged parts, they should be repaired by an authorized service or replaced with original parts. Otherwise, the warranty of the stroller will be annulled.
-
Do not make modifications on the construction and do not replace the work parts with ones that are поt suitable and are not original. This may lead to incorrect functioning of the stroller and to injury of your child. And also to annulment of your warranty of the stroller.
-
In order to clean the cover, the dirty plastic and metal parts of the product, use soft cotton cloth or sponge, wetted with water.
-
Never clean with agents containing abrasive particles, ammonia, bleach, or alcohol. DO NOT wash in the laundry the removable and accessories – parts and accessories – canopy, etc., because this may lead to their damage.
Otherwise, the warranty will be annulled. -
Always after cleaning leave the stroller to dry completely and afterwards use it or store it.
-
Store the stroller indoors. The effects of the environment – sea air, roads sprinkled with salt, acid rains, etc., as well as the storage outdoors lead to the emergence of corrosion.
-
Do not store the stroller in a humid environment. In case you have used the stroller in a humid environment, you should unfold it, wipe it with a dry cloth and let it dry completely naturally. It is possible for mold to appear if you store it while wet.
-
Too much sunlight will affect the aging of the stroller parts and the fabric.
-
Do NOT place other objects inside the stroller – luggage, bags with goods, handbags etc. when you use it or storage it, because this could damage the stroller and may lead to harm your child inside of it.
Customer Service
Manufactured for Moni in PRC
Manufacturer and Importer: Moni Trade Ltd.
Address: Bulgaria, Sofia, Trebich, 1 Dolo Str.,
Phone number: 003592/936 07 90
Website : www.moni.bg
References
- Мони Трейд - детÑки колички, детÑки кошарки, детÑки играчки, детÑки Ñтол за кола
- Мони Трейд - детÑки колички, детÑки кошарки, детÑки играчки, детÑки Ñтол за кола
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>