MONI F8 Baby Stroller BERLIN User Manual
- June 1, 2024
- MONI
Table of Contents
MONI F8 Baby Stroller BERLIN User Manual
Maximum – 22 kg
0 – 4 years
Baby Stroller BERLIN Item Number F8
PARTS
PD
ASSEMBLY STEPS
IMPORTANT! KEEP FOR FUTURE REFERENCE!
READ CAREFULLY! CONTAINS IMORTANT INFORMATION, GUIDELINES AND RECOMMENDATIONS
FOR THE PRODUCT AND ITS SAFE USE.
WARNING! THE SCHEMES AND FIGURES IN THIS MANUAL ARE ILLUSTRATIVE AND FOR GUIDANCE ONLY. THE PRODUCT YOU HAVE BOUGHT MAY DIFFER FROM THEM.
The manufacturer reserves his rights to make changes on the design of the product in order to improve it. This stroller is suitable for babies and children aged 0 to 4 years or up to 22kg (whichever comes first). A five-point belt ensures the safety of the child. The positions of the child’s backrest, the footrest and the sun visor are adjustable.
The seat is installed in two positions, allowing the child to be facing the direction or the direction of travel. The stroller is manufactured in accordance with the requirements of the European standard in 2 parts: EN 1888-1:2018+A1:2022 – ‘Child care articles. Wheeled child conveyances. Part 1: Pushchairs and prams.“ and EN 1888-2:2018+A1:2022 ‘Child care articles. Wheeled child conveyances. Part 2:Pushchairs for children above 15 kg and up to 22 kg”.
WARNING! Your child will be maximally protected if you follow the warnings and recommendations from the instructions! Pay attention to the warnings provide all necessary in order to avoid the risk of injury or impairment of the child if you do not provide its safety! You are responsible for the safety of the child, if you do not follow and do not comply with these warnings and recommendations! Make sure that anyone who uses the stroller is familiar with the instruction and follows it. Do not use parts or accessories for the stroller, which are not approved by the manufacturer or the distributer, because this may put your child at risk and to lead to voiding of the warranty of the stroller.
WARNINGS AND RECOMMENDATIONS FOR SAFE USE
WARNING:
WARNING:
- IMPORTANT – READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
- NEVER LEAVE THE CHILD UNATTENDED.
- ENSURE THAT ALL LOCKING DEVICES ARE ENGAGED BEFORE USE.
- TO AVOID INJURY ENSURE THAT THE CHILD IS KEPT AWAY WHEN UNFOLDING AND FOLDING THIS PRODUCT.
- DO NOT LET THE CHILD PLAY WITH THIS PRODUCT.
- AS SOON AS THE CHILD IS ABLE TO SIT UP BY ITSELF, ALWAYS USE A SAFETY BELT.
- THIS SEAT UNIT IS NOT SUITABLE FOR CHILDREN UNDER 6 MONTHS.
- ALWAYS USE THE RESTRAINT SYSTEM.
- CHECK THAT THE PRAM BODY OR SEAT UNIT OR CAR SEAT ATTACHMENT DEVICES ARE CORRECTLY ENGAGED BEFORE USE.
- THIS PRODUCT IS NOT SUITABLE FOR RUNNING OR SKATING.
- USE THE SEAT (SUMMER BASKET FUNCTION) FOR A CHILD WEIGHTING LESS THAN 22 KG (0-48 MONTHS).
- USE THE BASKET FOR A CHILD THAT CANNOT SIT WITHOUT SOMEONE`S HELP, TO ROLL AND STAND UP ON ITS OWN, USING YOUR HANDS AND KNEE SUPPORT! MAXIMUM WEIGHT OF THE CHILD: 9 KG.
- USE THE SEAT ONLY ON A RIGID, HORIZONTAL AND DRY SURFACE!
- NEVER USE A THE SEAT ON A STAND!
- FOR A NEWBORN BABY USE THE LOWEST POSITION OF THE BACKREST!
- USE THE POSITION OF THE BACKREST IN SEATING POSITION FOR CHILDREN AFTER 6 MONTHS AGE!
- KEEP OUT OF FIRE!
- DO NOT LIFT THE STROLLER BY THE SAFETY BOARD!
- The assembly of the product is only to be done by an adult!
- Do not put an extra mattress thicker than 20mm in the seat!
- Always activate the rear brake when placing and removing the child from the stroller!
- Before use, make sure that the seat belts are properly fitted and adjusted.
- The maximum load on the luggage basket should not exceed 2kg!
- Do not overload the stroller! Any load placed and / or attached to the handle, board, backrest, canopy and /or sides of the stroller can affect its stability! The stroller and the seat are designed to carry only one child!
- Do not use spare parts and other components not supplied by the manufacturer! The manufacturer accepts no liability for safety if used spare parts, different from the original ones or approved by the approved type.
- Do not make changes or modifications to the construction! If necessary, contact your supplier or an authorized service centre for advice and repair.
- The car seat does not replace the baby seat or crib. When the baby does not need sleep, it should be placed in a suitable baby stroller, seat or crib.
- Do not use the product if you find any missing or damaged parts!
- Do not allow children under 3 years of age to fully assemble the product to avoid access to small and disassembled parts!
- Do not place additional cords or ties on the product to avoid the risk of suffocation!
- Do not use the stroller on escalator and be careful when getting down or up on the sidewalk.
- Keep the plastic packaging away from children to avoid the risk of suffocation!
- DO NOT store the product in humid places and in direct sunlight!
PARTS
SEE FIGURE PD:
PD: 1.Handle; 2.Canopy; 3.Rear wheel; 4.Safety board; 5.Upholstery; 6.Front
wheel orientation; 7.Adjustable footrest.
ASSEMBLY STEPS AND USE
- UNFOLDING THE STROLLER – FIGURES 1-3: Pull the handle up until the frame reaches the end position. You should hear a click when the frame locks.
- INSTALLING AND REMOVING THE FRONT WHEELS – FIGURES 4-5: Insert the front wheel into the front frame hole, as shown in Figure 4. Fix it until you hear a “click”. To remove the front wheels, press the metal clip and the wheels are removed easily by pulling out (Figure 5).
- ORIENTATION OF THE FRONT WHEELS – FIGURE 6: Press the lever downwards to activate the straight direction of front wheels. Pull the lever upwards to activate the swiveling of front wheels.
- INSTALLING AND REMOVING THE REAR WHEELS – FIGURE 7: Insert the rear wheel into the hole of the rear frame, as shown in Figure 7. Fix until you hear a click. To remove the rear wheels, push the button and the wheels are released quickly by pulling out.
- USING THE BRAKE ON THE REAR FRAME– FIGURE 8: To activate the parking device and lock the two rear wheels, press down the pedal on the rear axle (Figure 8). To release the brake, pull up the pedal using your foot.
- ADJUSTING SEAT TILT – FIGURES 9: Press the strap system button on the back of the seat and move it up to adjust the seat to the seated position. Press the strap system button and move it down to adjust the seat to the horizontal position.
- USING THE FOOTREST – FIGURE 10: To adjust the footrest, hold the button on both sides for its release.
- ATTACH AND DETACH THE SAFETY BOARD – FIGURE 11: Insert both ends of the safety board into the two side holes of the frame. Secure the guard until you hear a click. To remove the guard, press the release button on both sides of the frame and pull at the same time. The safety bumper has a function of pivoting, it can be opened just one side for easier taking care of baby or putting it in or taking it out.
- FOLDING THE STROLLER – FIGURES 12-13: Before folding the stroller, activate the parking device and fold the canopy. Simultaneously hold the unlock button and the fold button on the stroller frame (figure 12) and push the handle forward until the stroller folds. 10.5-POINT SAFETY BELT – FIGURE 14 To attach the belt, insert the two tabs of the lap belt into the buckle on both sides, should click when properly inserted. The shoulder straps are fitted as the metal tabs are assembled and inserted into the buckle. The sliding adjusters are fitted and must be carefully adjusted on each side so that the belt is fastened around your child without causing discomfort. To release the bely, press the buckle button, and pull to open.
CLEANING AND MAINTENANCE OF THE PRODUCT
- Regularly check the locking devices, brakes, safety belts and buckles, connectors and fixing mechanisms in order to be sure that they are in good working order and are not worn or damaged.
- If you find loose, broken and damaged parts, they should be repaired by an authorized service or replaced with original parts. Otherwise the warranty of the stroller will be annulled.
- Do not make modifications on the construction and do not replace the work parts with ones that are поt suitable and are not original. This may lead to incorrect functioning of the stroller and to injury of your child. And also to annulment of your warranty of the stroller.
- In order to clean the cover, the dirty plastic and metal parts of the product, use soft cotton cloth or sponge, wetted with water.
- Never clean with agents containing abrasive particles, ammonia, bleach or alcohol. DO NOT wash in the laundry the removable and accessories – parts and accessories – canopy, etc., because this may lead to their damage. Otherwise the warranty will be annulled.
- Always after cleaning leave the stroller to dry completely and afterwards use it or store it.
- Store the stroller indoors. The effects of the environment – sea air, roads sprinkled with salt, acid rains, etc., as well as the storage outdoors lead to the emergence of corrosion.
- Do not store the stroller in a humid environment. In case you have used the stroller in a humid environment, you should unfold it, wipe it with a dry cloth and let it dry completely naturally. It is possible for mold to appear, if you store it while wet.
- Too much sunlight will affect the aging of the stroller parts and the fabric.
- Do NOT place other objects inside the stroller – luggage , bags with goods, handbags etc. when you use it or storage it, because this could damage the stroller and may lead to harm your child inside of it. Not following this instruction will lead to guarantee cancel.
Manufactured for Moni in PRC Manufacturer and Importer: Moni Trade Ltd. Address: Bulgaria, Sofia, Trebich, 1 Dolo Str., Phone number: 003592/936 07 90 Website: www.moni.bg
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>