MOnI RK1D-NORDINE Children Rocker User Manual

MOnI RK1D-NORDINE Children Rocker

WARNINGS AND RECOMMENDATIONS FOR SAFE USE

WARNING!

1. Never leave the child unattended!
2. Do not use the reclined cradle once your child can sit unaided.
3. This reclined cradle is not intended for prolonged periods of sleeping.
4. It is dangerous to use this reclined cradle on an elevated surface, e.g. a table.
5. Always use the restraint system.
6. Never use the toy bar to carry the reclined cradle.
7. The product is intended for children with maximum weight of 9 kg, and who cannot sit unaided.
8. The assembly of the product must be done only by an adult!
9. The package contains small parts. Children under 3 years of age must not be present during the assembling.
10. For home use only.
11. Remove all the packages before using the product.
12. The reclined cradle does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable cot or bed.
13. Use only as intended
14. Do not place the bouncer on uneven ground, near steps or stairs, slippery and wet surfaces, swimming pools, heat sources – heaters, cookers or open fireplaces, and other dangerous places.
15. Never place on a soft surface (bed, couch, pillow). The bouncer can turnover and the child to suffocate in the soft surface.
16. Do not place more than 1 child in the rocker.
17. Do not allow children to play around the bouncer, while there is another child in it.
18. Do not attach additional ties or cords on the product to avoid the risk of suffocation.
19. Do not use the bouncer if there are broken or missing parts.
20. Do not use accessories or spare parts different from those provided from the factory.
21. Do not make any changes or improvements on the frame of the bouncer. If there is any damage or missing/ broken parts, contact the shop from which you bought the product.
22. Before each use check, if there are any damages, broken, torn apart or missing parts.
23. The dye and raw materials used for producing this product are safe for the human health.

PARTS

Before assembly of the rocker, take all the parts out of the packing and check if all of the bellow listed are present. Keep the packages until you finish the assembly completely.

1. Upper frames (2 pcs);
2. Lower frames (2 pcs);
3. Kickstand (1 pc);
4. Support tube (1 pc);
5. Tube for attaching the music box (1 pc);
6. Tube for the backrest (1 pc);
7. Toy bar (1 pc);
8. Music box (1 pc);
9. Seat pad (1 pc);
10. Bag with screws and nuts (1 pc).

ASSEMBLY STEPS

• After each step check, if the attached parts are well-fixed.
• Do not use parts or accessories, which are not provided from the manufacturer, the importer or the shop, from which you bought the product.

1. Step 1 – See Figure 1: Attach the left upper and lower frames and the kickstand to each other. The holes on the frames and kickstand, which are for the fixing screw, must be aligned. Slide through these holes an M5*44 mm screw. Fix it using nut and screwdriver. Mount the kickstand to the right upper and lower frames in the same way.

2. Step 2 – See Figure 2: Take the support tube and attach it to the rear part of the frames. Align the holes for the fixing screws. Slide through them screw M5*30 mm and fix it using nut and screwdriver.

3. Step 3 – See Figure 3: Attach the ends of the tube for the music box in the plastic openings of the side frames. Align the holes of the tube and the frames designed for the fixing screws. Slide on each side M5*30 mm screw in these holes and fix it using a screwdriver.

4. Step 4 – See Figure 4: Attach the tube for the backrest to the plastic holders responsible and for adjusting the backrest in different laying positions. Press the tube carefully down to fix it in the holders. Then you will hear a clicking sound. Pull the tube up to check if it is well-fixed. Note! The buttons on the rear part of the tube must be fixed in the corresponding holes in the holders.

5. Step 5 – See Figure 5: Place the seat pad between both of the frames. Then fit the upper rear pocket to the backrest tube. The bottom rear pocket must fit to the tube of the music box. Important! Fasten the buckles on both sides of the seat pad. And fasten the buckles of the canopy as well.
   

6. Step 6 – See Figures 6 and B: Take the music box and a screwdriver to remove the screw from the battery compartment cover. Place 2 alkaline batteries AA size correctly as shown on the bottom of the compartment. Reattach the cover and fix it using the screw. Note! The batteries are not included in the product. Then attach the music box to the tube of the rocker.

7. Step 7 – See Figure 7: Attach the toy bar to the side plastic holders. Note! The clips on both sides of the toy bar must be pointed towards you.

USE

1. Check several time if all the screws and belts are well fixed.
2. Place the child in the rocker: Remove the toy bar from the rocker, unfasten the safety belts and place the child on the seat. Place the belts pad between the legs of the child. Then place the shoulder belts and fasten the buckles of the waist belts. Make sure that you hear a clicking sound. Fasten the waist belts so that they fit snugly against your child. Be careful not to fasten them too tightly so as not to cause discomfort to the child. Then attach the toy bar to the rocker’s frame.
3. To calm the baby you can turn on the vibration and melodies function or only the vibration, or only the melodies on the music box. See Figure Music Box.
4. The backrest can be adjusted to 3 positions. Press the buttons on the sides of the adjusting mechanisms and put the backrest in the needed position. Warning! The child must not be in the rocker when changing the backrest position. To prevent serious injury: Use the upright position of the backrest, only when the child has developed sufficient control of the upper body to be able to stand in a sitting position without leaning forward.
5. The rocker is with a stand. Fold the stand inwards, if you want to swing the rocker. Rotate the stand out so that it stands on the floor, if you want the rocker to be in a static position.

RECOMMENDATIONS AND WARNINGS FOR THE SAFE USE OF THE BATTERIES

1. Do not allow children to play with the batteries.
2. Always use new batteries.
3. Do not mix old batteries with new ones.
4. Always use batteries from the same type. Do not mix alkaline, standard (Carbon – Zinc), or rechargeable (Nickel – Cadmium) batteries.
5. Always remove the discharged batteries.
6. After removing the discharged batteries, throw them away at the designated places, not with the household waste. They are recyclable. Do not throw them in fire. Risk of explosion or leakage.
7. Always change all the batteries, when removing the discharged one. Children should not be present while you are replacing the batteries.
8. Always remove the batteries, if you will not use the product for a long period of time.
9. Do not modify the electric line and do not add any parts to it.
10. Do not recharge batteries, which are not rechargeable.
11. If you use rechargeable batteries, firstly remove them from the product and then charge them under adult supervision.
12. Use only batteries with the size marked on the battery compartment or on the color box.
13. Alkaline batteries are recommended.

CLEANING AND MAINTENANCE OF THE BOUNCER

A. Cleaning:

1. Seat Pad:
   • Remove the seat pad by unbuckling the belts and remove the upper and bottom rear pockets from the frames.
   • The cover is cleaned with soft cloth, warm water and soft soap, but NOT in a washing machine. Wipe the pad and then clean it again with clean water and soft cloth. Leave the seat pad to dry out completely before next use.
   • DO NOT wash it in a washing machine and do not use drier, dry cleaner, whitening or tumble drying to clean the pad.
2. Toys and toy bar:
   • The toys and toy bar should be cleaned with soft slightly moist cloth. DO NOT GET THEM WET!
   • DO NOT wash it in a washing machine and do not use drier, dry cleaner, whitening or tumble drying to clean the pad.
3. Frame and plastic parts:
   • Wipe the frames and the plastic parts of the rocker with soft wet cloth and then immediately wipe dry.
4. Composition of the seat pad: Top Fabric: 100% Polyester Pongee; Padding: 100% Polyester; Lining: 100% Non-Woven Polypropylene.
   • Do not store and do not use the bouncer before it is completely dry.
   • Do not use strong detergents – bleach, alcohol-based ones or such with abrasive particles, to clean the product.
   • DO NOT USE WET WIPES to clean the product.

B. Maintenance:

• Check regularly the parts of the rocker for damages – broken or missing parts,
• If there are such, do not try to repair the product by yourselves. Contact the shop, from which you bought the product. Stop using the product until the damage is repaired.
• When not using the product, store it in a safe place away from children’s reach.
• Store the bouncer in dry and well-ventilated place. Keep away from direct heat sources – open fires, heaters and cookers.
• Do not leave the product exposed to the harmful effects of external factors – direct sunlight, rain, snow, wind and dust.

Produced for Moni Trade Ltd under Moni brand

• Importer: Moni Trade Ltd.
• Address: Bulgaria, Sofia, Trebich quarter, 1 Dolo str.
• Tel: +359 2/ 936 07 90;
• Web: www.moni.bg

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>