MOOER DH06 HORNET 30 Watt Combo Owner’s Manual
- June 1, 2024
- Mooer
Table of Contents
MOOER DH06 HORNET 30 Watt Combo
Specifications
- Model: DH06 (Hornet 30 Black)
- Power Supply: DC Power Supply (24VDC, center negative)
- Wireless Connectivity: Bluetooth
Product Information
Precautions:
- Power Supply: Please connect the DC Power Supply to an AC outlet of the correct voltage. Use only an AC adapter supplying 24V , center negative. Unplug the AC power adapter when not in use or during electrical storms.
- Connections: When connecting or disconnecting, ensure to prevent malfunction or damage to other devices. Disconnect all connection cables and the power cord before moving the unit.
- Cleaning: Clean with a soft, dry cloth. If necessary, slightly moisten the cloth. Avoid using abrasive cleansers, cleaning alcohol, paint thinners, wax, solvents, cleaning fluids, or chemical-impregnated wiping cloths.
- Interference with other electrical devices: Operate the unit at a suitable distance from radios and televisions to prevent reception interference.
- Location: Avoid exposing the unit to direct sunlight, magnetic fields, excessive dust or dirt, strong vibrations or shocks, heat sources, extreme temperature or humidity, and high humidity or moisture.
FCC Certification: This device complies with Part 15 of the FCC Rules.
Precautions
PLEASE READ CAREFULLY BEFORE PROCEEDING
Power Supply
- Please connect the DC POWER Supply to an AC outlet of the correct voltage.
- Please be sure to use only an AC adapter that supplies 24V DC, 0 0-0, center negative. Unplug the AC power adapter when not in use or during electrical storms.
Connections
Always turn off the power of this and all other equipment before connecting or
disconnecting, this will help prevent malfunction and/or damage to other
devices. Also, make sure to disconnect all connection cables and the power
cord before moving this unit.
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.
Do not use abrasive cleansers, cleaning alcohol, paint thinners, wax,
solvents, cleaning fluids, or chemical-impregnated wiping cloths.
Interference with other electrical devices
- Radios and televisions placed nearby may experience reception interference.
- Operate this unit at a suitable distance from radios and televisions.
Location
To avoid deformation, discoloration, or other serious damage, do not expose
this unit to the following conditions:
- Direct sunlight
- Magnetic fields
- Excessive dusty or dirty location
- Strong vibrations or shocks
- Heat sources
- Extreme temperature or humidity
- High humidity or moisture
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
MOOER HORNET
Congratulations on your purchase of the MOOER HORNET 30-watt digital modeling combo amplifier. We recommend reading this manual in full to see all of the features that your new Hornet has to offer. We hope you enjoy playing with your new HORNET from MOOER.
- This manual applies to all MOOER Hornet series products.
- The preamp section of each Hornet amp is different. Please refer to the relevant information in the manual.
The HORNET 30 is available in 2 different colors. Each version has a different set of 9 amp models which are accessible via the AMP MODEL control on the front of the amplifier. Here’s a breakdown of the amp models in each version of the HORNET.
The mentioned manufacturer and product names are trademarks or registered trademarks of their respective owners, the trademarks were used merely to identify the sound character of this product.
The
mentioned manufacturer and product names are trademarks or registered
trademarks of their respective owners, the trademarks were used merely to
identify the sound character of this product.
Main Features
- 9 high-quality digital amp models based on popular guitar amplifiers
- Built-in Modulation, Delay, and Reverb effects with independent tap tempo for each 2 modes of operation (Live/Preset)
- Store and recall up to 9 presets
- Highly sensitive precision tuner
- Wireless BT connectivity and AUX IN for media playback
- Dedicated headphones output
- 8-inch custom speaker, 30W RMS
Top Panel Layout
-
INPUT
Connect instrument using a 1/4″ jack cable. -
GAIN
Adjusts the input gain of the amplifier. -
TONE STACK
Stack treble mid bass three band eq. -
VOLUME
Adjusts the output volume of the guitar amplifier and preset volume. -
MOD
Rotate to select and adjust the modulation effects (CHORUS, PHASER,
FLANGER) .The DEPTH value of those effects could be adjusted. -
DELAY
Rotate to select and adjust the delay effect type (ANALOG, TAPE ECHO,
DIGITAL).The LEVEL and FEEDBACK of effects could be adjust simultaneously. -
REVERB
Rotate to select and adjust the reverb effect type (ROOM, HALL, CHURCH).
When this control is fully counter-clockwise the reverb effects are not active. -
D.TAP
D.TAP Tap tempo control for DELAY effects. Simply tap the button 2 or more times and the effect will synchronize to your tempo.] -
BT
Press to toggle the BT wireless receiver on/off. (PAIRING CODE:0000). -
TUNER
Press once to toggle the guitar tuner on/off.
Hold to edit the global volume output of HORNET. -
LIVE/PRESET
Press once to toggle between Live mode and Preset mode.
The button will illuminate when the amplifier is in Preset mode.
Hold to store current settings in the Amp model for preset mode. -
LED SCREEN
Displays various information such as amp model, tuning functions, etc. -
FACTORY RESET Power on the Hornet, press and hold the BT button,
Hornet will be booted to RESET mode as the LED button and screen blink. Press the LIVE/PRESET button to confirm the reset. Press any other button to exit reset.
Back Panel Layout
-
POWER
Used to switch the Hornet on/off. -
DC IN
Connect the included power supply.
DC 24V 1.6A centre pin negative. -
Built-in carry handle
Suitable for transportation. -
Headphone output
Standard 1/8″ headphone jack socket for silent practice. -
AUX IN
Connect an external device for audio playback using a standard 1/8″ stereo jack cable.
Modes and Saving
There are two modes of operation for the HORNET. Press the LIVE/PRESET button to toggle between these two modes. In both modes rotate the AMP MODEL control on the front of the HORNET to select a different amp model.
LIVE MODE
- In live mode, all parameters are depicted directly by their respective controls, like a traditional amplifier.
- The LED SCREEN will display “L” and the LIVE/PRESET button will not be illuminated.
PRESET MODE
- In Preset mode, you can store your settings for each amp model. Each of the amp models will recall all parameter values that were previously stored when selected, regardless of the parameter controls physical positions.
- The LED SCREEN will display a number from 1-9 to indicate which amp model is currently selected and the LIVE/PRESET button will be illuminated.
SAVING AMP SETTINGS
- To save settings for the currently selected amp model, hold the.
- LIVE/PRESET button for a couple of seconds after creating the tone you want. The LED SCREEN and the LIVE/PRESET button will flash 4 times to confirm the settings have been saved. Next time you select that amp model whilst in “PRESET MODE” the settings will be recalled. You can store settings for the amp models preset whilst in either of the operation modes.
GLOBAL VOLUME CONTROL
Hornet has the added feature of a Global volume control. This will adjust the
overall output of the Hornet and will affect the guitar, presets, and audio
playback from external devices.
- Hold the TUNER button for several seconds until it begins to flash. The LED
- SCREEN will display a number between 1 and 9. Rotate the VOLUME control to adjust this parameter.
- By default, this will be set at full volume (9) from the factory.
Wireless BT Connection
- Press the space BT button to switch on BT connectivity.
- Ensure that the BT is active on the device you wish to pair with the Hornet and that your device is discoverable.
- Search in available devices for “MOOER HORNET” and select Connect on your device to pair it with your Hornet amplifier. If it requests a . password, enter “0000”.
- Once paired you can now playback music wirelessly via your Hornet amplifier.
Technical Parameters
- Inputs: 1/4″ instrument signal input interface (impedance 1M) 3.5MM AUX IN audio interface (impedance 10K)
- Output: 3.5MM headphone stereo audio interface (impedance 47 ohms)
- Sampling rate: 48K
- Sampling accuracy: 32bit
- Power supply: DC 24V 1.67
- Size: 340 (w) x188 (D) x 280mm (H)
- Speaker: 8″ impedance of 8 ohms
- Rated power: 30W
- Weight: 4kg
- Accessories: User Manual adapter
FCC
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator& your body.
More Information
- Shenzhen Mooer Audio Co. ,Ltd
- 6F, Unit D, Jinghang Building, Liuxian 3rd Road, Baoan 71 District, Shenzhen, China
FAQ
- Q: How do I clean the amplifier?
- A: Clean the amplifier with a soft, dry cloth. If needed, slightly moisten the cloth. Avoid using abrasive cleaners or chemicals.
- Q: What should I do to prevent interference with other devices?
- A: Operate the unit at a suitable distance from radios and televisions to avoid reception interference.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>