Gelius GP-BFS002 ZeroFat 2 Smart Floor Scale User Manual

USER MANUAL

Safety precautions:

When using digital scale, certain basic safety precautions must be followed, including the following:

1. The Bluetooth scale should not be used to diagnose or treat any medical condition. You should consult a doctor when undertaking any diet or exercise program.
2. If you are pregnant or have a pacemaker or other internal device,you should not over rely on the data provided by this product. All data is for reference and is not a substitute for advise from a licensed health care professional.
3. If the scale malfunctions, first check the batteries and replace if needed.
4. Check the device before each use. Do not use the device if damaged. The continuous use of a damaged unit may cause injury or improper results.

Note:

1. Scale is a high-precision measuring device. Never jump or stamp on the scale or disassemble. Please handle the scale carefully to avoid breakage.
2. Place the scale on a hard, flat surface during use. Using the scale on a soft surface like carpet or linoleum may affect the accuracy of the scale readings.
3. To ensure weighing accuracy, please gently step on the scale to wake it up and wait at least 10 seconds before weighing on the scale. You must also wake up the  scale if it has been moved. Take your measurements at the same time each day to ensure the most accurate results.
4. When not in use, please remove the batteries and place the device in a dry room and protect it against extreme moisture, heat, lint, dust and direct sunlight. Never place any heavy objects on the equipment.
5. Before using the scale, make sure you have entered all your personal data through the Fitdays app.
6. Use the scale while barefoot. The scale cannot measure body fat percentage if you’re wearing shoes or socks.
7. Make sure your feet are dry before weighing yourself.
8. This scate is not waterproof; never immerse the scale in water. To clean the surface, use a damp cloth or glass cleaner. Do not use soap or other chemicals.

Specifications

Super tempered glass: 260x260x5mm
Safty glass corner: R25
LCD display with backlight: 27x72mm
Capacity: 180kg/400lb
Division: 100g/0.2Ib
Overload indication: ERR
Low power indication: Lo

Caution

Troubleshooting

Functioning normally| No Display
Change battery| Calibrating
---|---|---
Change battery| Overload|

For body weight: Place the scale on an even surface and wait at least 10

seconds before stepping on the scale. The reading should display 0 0 kg before stepping on.
For body fat and other body composition analysis: Stand straight on scale and uniformly touched the electrodes with bare and dry feet as shown below.
Operating instructions

The Bluetooth Scale can connect with your mobile phone (Android 6.0+ & IOS 8.0+) or iPad via Bluetooth 4.0. Download the ‘Fitdays’ app free from the App Store or Google Play.

Pairing the scale with your smartphone

Download ” Fridays ” via App Store or Google Play.

http://www.fitfeel.cn/fitdays/

Register your own ID, then add personal data and confirm OK.

Install the original battery set. Please note the batteries offered are trial version. We recommend replacing them within 3 months and removing the batteries when not using for a long time.

Download App and install the batteries

Turn on Bluetooth on your smartphone. Location also needs to be turned on for Android 6.0 or higher.
Press [Device] and Device Management to enter measuring page and find device.

Power on the scale, press [+] to select “My_scale” to and the device.
Come back to measure page step on the scale anikeep standing for 5-10 seconds with bare feet. The weighing has finished after the analyzing datas come out.

View reports, deleted data, set reference data, share progress by

recently, weekly, month, and year.

Click ” Chart ” to view your progress history. Enter it into the calendar to form a list and select a dataset or all data you want to delete. You can also select different date datas to contrast and share to friend via Facebook, Instagram, or SMS by click button

At the bottom, you will find a bar where you can select different types of data to display. You can share your fitness data with friends via Facebook, Instagram, or SMS by clicking the share button [+] and Share on the Measuring page.

Add/Delete Users & Basic Settings

Under “Mine” you can add user(s) “ ” To delete an account, swipe the account to the left and select” Delete”. Themes, Set goals, Weight units, Weighing done sounds, Languages, Passwords/can all be set under the Setting “ ” page. Please note that /ou can change thex weighing unit under Press the Unit button, then if will control the unit of App.

Sync to fitness app

Apple Health

1. Open the ” Health ” app on your iPhone, select ‘Data Sources.
2. Select ” Fitdays ” from the sources list.
3. Turn on all categories to allow the Fitdays app to work.
   

Google Fit

1. Enter Setting “ ” page, select ” Google Fit “
2. Turn on ” Google Fit ” button, login to your Google account.
3. It will now automatically redirect you to the ” Google Fit ” page.
4. After the connection has been established, the data ” Weight ” will sync to Google Fit.
   

Fitbit App

1. Enter Setting “ ” page, select Fitbit
2. Turn on Fitbit button, login to your Fitbit account.
3. Select ” Allow ” to access Fitbit App.
4. After connection, the data (Weight, Body Fat%, BMI) will sync to Fitbit app. You can view both on app and web.
   

Maintenance

Recalibrating the scale

If the scale has been moved or flipped up side down, It must be recalibrated to ensure accurate results.

1. Place the scale on a hard, flat surface.
2. Step on the scale with one foot until the digits appear on the display, then, step off.
3. The scale will show “0.00”, indicating that the calibration process is complete.
   

Frequently Asked Questions & Answers

1. Why doesn’t the scale work? Why does the data on screen disappear in a flash?
   • Please check the batteries are installed properly, replace batteries if necessary.

2. The scale cannot connect with App.
   • Check that the phone’s software is iOS 8.0 or higher or Android6.0 or higher.
   • Download and open the newest version of the Fitdays App.
   • Enable Bluetooth on your phone. For Android 6.0 or higher, location needs to be enabled

3. No body fat measured when weighing.
   • Step on with dry and bare feet
   • Ensure Bluetooth is enabled and working
   • Ensure personal data is entered.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>