MONI MC-08D Kids’ Scooter Lollipop Instructions
- June 8, 2024
- MONI
Table of Contents
MONI MC-08D Kids’ Scooter Lollipop
NOTE
The images in the manual have been elaborated solely to illustrate the
construction and the assembly mode of the toy. They may not correspond
completely to the actual product. MONI TRADE reserves the right to make
changes to the construction and design of the product in order to improve its
quality.
PARTES
- Handlebar stem
- Saddle with support leg
- Scooter body set
- Backrest
- Steam for pushing and control of the scooter
- Basket
- Assembly set
ASSEMBLING
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. TO ENSURE SAFE USE OF THE PRODUCT, ALL INSTRUCTIONS AND RECOMMENDATIONS GIVEN IN THE MANUAL SHOULD BE STRICTLY FOLLOWED.
INTENDED USE
The children’s scooter 5in1 with handle for parental control is designed for use by children over 24 months of age. The maximum permitted weight for the saddle is up to 20 kg. The maximum permitted weight for the base of the scooter is up to 40 kg. The product is designed for play and home use. It is intended for use by one child only. The child who will use the scooter must be able to stand steady on their feet and move on their own.
SAFETY INSTRUCTIONS AND WARNINGS
- WARNING! Do not use this product without reading the instructions for use first.
- WARNING! To be used in the presence, under the control and direct monitoring of an adult.
- WARNING! Protective equipment should be worn. Make sure your child always wears full protective equipment that includes at least: helmet, knee pads, elbow protectors and wrist protectors. Make sure your child wears sturdy, non-slip shoes, covering his toes, because of danger of feet injury while using the scooter.
- WARNING! Not to be used in traffic.
- WARNING! The scooter has been designed to be ridden by young children on flat and smooth surfaces. Do not use the product on soft surfaces such as grass, soil, or sand. To be used only in well-lit and safe playgrounds and secure areas. Do not use on wet or slippery surfaces. Never allow child to ride near pools and stairs. Do not use in rainy weather or in the evening.
- WARNING! The product needs to be used with caution, since skill is required to avoid falls or collisions causing injury to the user or third parties. Before the first use teach your child how correctly to ride the scooter. Make sure the child understands how the scooter works and can use it correctly and safely in a safe and supervised environment.
- WARNING! Use the scooter only for its intended purpose. If a child uses the scooter in a manner other than its intended use, there is a risk of damage that could lead to serious injury. Do not use to carry loads. Not to be used for acrobatic or other risky manoeuvres such as making tricks, riding on ramps etc.. Not to be used by more than one child at a time.
- WARNING! The packaging of this scooter contains small parts that can cause choking or suffocation if swallowed. To be unpacked and assembled away from children.
- If the scooter is bumped, carefully inspect the scooter (such as sharp edges or cracks) and its components for possible malfunctions before the child uses it again. Do not use the toy if any parts are found to be missing or damaged. Contact MONI TRADE for replacement parts and instructional literature, if needed. DO NOT substitute parts.
- IMPORTANT: Do not make any modifications to the product! Do not change any part of the design of the scooter, because it might result in reducing of the safety of the product! Do not place or tie any objects or other accessories and strings to it. This may cause hooking, entanglement, and loss of balance, resulting in injury to the child. Do not remove the braking system.
ASSEMBLY OF THE SCOOTER
Before being used by a child, the scooter must be assembled by an adult who
has previously read the assembly instructions. Keep fingers and hands from the
folding mechanisms to avoid pinching when assembling the scooter. Remove the
scooter from the box. Check it for scratches of the paint and/or indents,
which may have occurred during transport. The scooter is prepared and packaged
by the manufacturer and there should not be any problems, even if there are
scratches or indents on the box.
- Assembling of the handlebar steam (see Figures 1,2 and 3). Insert the handlebar steam into the provided hole on the scooter’s body, press the red locking button, press it down until you hear a click sound and the red button returns to its initial position.
- Installing the support plate of the seat (see Figure 4). Install the support plate under the rear end of the seat with 2 pcs hexagon bolts.
- Assembling of the saddle (see Figures 5,6, and 7). When assembling the saddle, you have the option to choose from the three height adjustment positions. Insert by slightly pressing the front side of the saddle in the desired height position and then mount the saddle to the handlebar steam with a bolt and nut. Insert the support leg on the desired position under the saddle, mount the plate with the bolts using the provided in the assembly set tool.
- WARNING! The saddle height should be adjusted according to the height of the child. Usually start with the shorter position of the saddle. The child should touch the ground freely with its feet, otherwise should not be able to stop and will lose balance which can cause fall and injury of the child.
- Assembling of the steam for pushing and control of the scooter (see Figures 8,9 and 10). Put the steam for pushing and control of the scooter through the support plate. Insert the steam into the provided hole on the scooter’s body, press the red locking button, press it down until you hear a click sound and the red button returns to its initial position.
- Installing the backrest (see Figure 11). Install the backrest using 2 pcs hexagon bolts.
- Installing the basket (see Figure 12). To mount the basket on the steering steam, use the mounting bolt for the basket.
STOPPING WITH THE SCOOTER
The scooter does not have a starting device. It has a stopping device, which does not activate automatically. Stopping is an important skill and must be acquired in time. Never lift your hands – hold the handlebar firmly.
- Make sure that you hold the handlebar firmly with both hands and move in a straight line. Slide one foot back towards the rear wheel of the scooter.
- With the heel of this foot gradually apply pressure on the brake mechanism. This will reduce the speed and will finally lead to the stopping of the scooter.
WARNING! The breaking mechanism can get heated during use. DO NOT touch the brake after stopping! While using the brake never touch it or the wheels – during continuous use for reduction of the speed and during stopping their temperature rises and you may burn your hands!
INSTRUCTIONS FOR USE
Before each use, make sure that:
- The scooter is correctly assembled, and the handlebar is correctly adjusted.
- All locking devices and self-locking attachments are switched on and in full working order.
- The wheels are tightened at the axles and rotate well. If there is any friction or the wheels totters, you must immediately stop using the product.
- The hand grips are not torn at their ends.
- All the bolts and other components are well-fixed and show no signs of abnormal wear.
CARE AND MAINTENANCE
Keeping the kick scooter clean and in good working order will extend its life and function while maintaining your child’s safety.
- Regularly clean with a soft, wet cloth, after that wipe dry. Do not use abrasive cleaning agents.
- The bearings are adjusted to the wheels of the fixed type which means that they require little to no maintenance. They are cleaned with dry cloth and are to be oiled. This increases their period of use and improves the exploitation qualities of the scooter.
- Make sure that the area around the wheels is kept clean and no mud is left on it. Oil the bearings regularly. Do not ride the scooter in wet weather. If you have rode it in wet weather, afterward wipe it dry thoroughly.
- Do not leave the product exposed to the negative effects of external factors such as rain, snow, and direct sunlight.
- Keep the scooter in dry and well-ventilated places.
The kids’ scooter LOLLIPOP has been designed and produced in accordance with the requirements of the European Toy Safety Directive 2009/48/EC. This product complies with the general and specific requirements of the European harmonized standards on safety of toys EN 71: BDS EN ISO 71- 1:2014+A1:2018; BDS EN 71-2:2021; BDS EN 71-3:2019+A1:2021.
Manufactured for MONI in PRC
Manufacturer and Importer: Moni Trade Ltd.
Address: Bulgaria, Sofia, Trebich, 1 Dolo Str.,
Phone number: 003592/936 07 90, website:
www.byox.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>