IKEA STYRBAR Smart Lighting Remote Control Instructions

June 2, 2024
Ikea

IKEA-logo

IKEA STYRBAR Smart Lighting Remote Control

IKEA-STYRBAR-Smart-Lighting-Remote-Control-product

Product Information

Specifications

  • Type: E2001 (STYRBAR Remote control stainless), E2002 (STYRBAR Remote control white)
  • Input: 3V, 2x AAA/HR03 LADDA batteries
  • Range: 10m in open air
  • Operating frequency: 2405-2480 MHz
  • Output power: 12.6 dBm (EIRP)
  • IP-class: IP44

Product Usage Instructions

Getting Started

  1. Download the IKEA Home smart app.
  2. Follow the on-screen instructions to add the product to your IKEA Home smart system.

Remote Control Functions

  • Short press to turn it on. To dim up, press and hold the button.
  • Short press to turn it off. To dim down, press and hold the button.
  • Change the white spectrum or colors.

Pairing
To pair with Smart Lighting products:

  1. Hold the remote close to the light source within 5cm.
  2. Press the pairing button 4 times within 5 seconds.
  3. A red light indicates successful pairing.

Adding Devices to Remote Control
If sold together, they are already paired. If purchased separately:

  1. Ensure the light source is installed and powered on.
  2. Hold the remote close to the light source.
  3. Press the pairing button 4 times within 5 seconds.

Factory Reset
To reset light sources: Toggle the main switch 6 times. To reset the remote control: Press the pairing button 4 times within 5 seconds.

Battery Replacement
When the battery needs replacement:

  1. A red LED indicator will flash when any button is pressed.
  2. Open the battery lid and replace it with two new AAA/HR03 batteries.

Care Instructions

  • To clean, wipe with a soft cloth dampened with mild detergent.
  • Do not use abrasive cleaners or solvents.

FAQ

  • How long do the batteries last?
    The batteries last for approximately 2 years with regular use.

  • How many light sources can be paired with one remote control?
    You can pair up to 10 light sources with one remote control.

  • What should I do if my light source becomes unsynchronized?
    A long press on the left buttons will return it to default settings (2700K).

Getting started with DIRIGERA hub

Download the IKEA Home smart app and follow the instructions on the screen to add the product to your IKEA Home smart system.

For Apple devices, download the app using the App Store. For Android devices, download the app using the Google Play store.

Note:
If you have a TRÅDFRI gateway please use IKEA Home Smart 1 app.

Remote Control Functions

  • Short press to turn it on. To dim up, press and hold the button.
  • Short press to turn it off. To dim down, press and hold the button.
  • Change the white spectrum or colors.
  • Pairing: Add IKEA Smart Lighting products to your system. See the instructions below.

Adding devices to your remote control

When the remote control is sold together with a light source (in the same package), they are already paired. If the remote control is purchased separately, you must manually pair it to your light source.

To add light sources, just repeat the steps below.

  1. Make sure that your light source is installed and the main power switch is turned on.
  2. Hold the remote control close to the light source you want to add (no more than 5 cm away).
  3. Press the pairing button 4 times within 5 seconds. A red light will shine steadily on the remote control. Your light source will begin to dim and flash one time to indicate that it has been successfully paired.

Up to 10 light sources can be paired with 1 remote control. Make sure to pair them one at a time. If the light sources are close to each other, disconnect those that have already been paired from the main power switch.

Factory reset your devices

  • For light sources:
    Toggle the main switch 6 times.

  • For remote control:
    Press the pairing button 4 times within 5 seconds.

Synchronizing
If your light source becomes unsynchronized, a long press on the left (<) or right (>) buttons will return the light source to its default setting (2700K).

Changing the battery

  • When the remote control is used regularly and as intended, the batteries will last for approximately 2 years.
  • When it’s time to replace the battery, a red LED indicator will flash when you press any button on the remote control. Open the battery lid and replace the battery with two new AAA/HR03 batteries.

Caution!

  • Risk of explosion if the battery is replaced by an incorrect type.
  • Dispose of used batteries according to the instructions.

Important!

  • The remote control is for indoor use only and can be used in temperatures ranging from 0ºC to 40 ºC.
  • Do not leave the remote control in direct sunlight or near any heat source, as it may overheat.
  • The range between the remote control and the receiver is measured in the open air.
  • Different building materials and placement of the units can affect the wireless connectivity range.

Care instructions

To clean the remote control, wipe with a soft cloth moistened with a little mild detergent. Use another soft, dry cloth to wipe dry.

Note!
Never use abrasive cleaners or chemical solvents as this can damage the product.

Recommended battery types:

  • 2 x IKEA LADDA 900 (AAA/HR03, 1.2V, 900mAh, Ni-MH) (Not included)
  • Do not mix batteries of different capacities, types, or date stamps.

TECHNICAL DATA

  • Type: E2001
  • Name: STYRBAR Remote control stainless
  • Type: E2002
  • Name: STYRBAR Remote control white
  • Input: 3V, 2x AAA/HR03 LADDA batteries
  • Range: 10 m in open air.
  • For indoor use only
  • Operating frequency: 2405-2480 MHz
  • Output power: 12.6 dBm (EIRP)
  • IP-class: IP44
  • Manufacturer: IKEA of Sweden AB
  • Address: Box 702, SE-343 81 Älmhult, SWEDEN

Declaration of Conformity

Hereby, IKEA of Sweden AB declares that the radio equipment type E2001/E2002 complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity can be found at http://www.ikea.com.

  • Choose the country you are in
  • Search your product in the search field
  • Go to Assembly Instructions and Manuals (downloads) Here will you find a pdf file of the full doc.

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling by local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or landfills and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.

© Inter IKEA Systems B.V. 2020.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals