MONI QLS-3288 Electric Ride On Quad Instruction Manual

QLS-3288 Electric Ride On Quad
Instruction Manual

QLS-3288 Electric Ride On Quad

Instruction Manual For Children’s Battery Operated ATVs with
1*12V7Ah Battery
Model: „MAJESTIC”
Item No.: QLS-3288

IMPORTANT! READ CAREFULLY AND KEEP IT FOR FUTURE REFERENCE!
THE USER MANUAL CONTAINS IMPORTANT INFORMATION ON THE ASSEMBLY, CORRECT USE, AND MAINTENANCE OF THE PRODUCT. THE BO ATV COMPLIES WITH THE REQUIREMENTS OF EUROPEAN STANDARD EN 71-1-2-3.
WARNING! THE SCHEMES AND FIGURES IN THIS INSTRUCTION ARE FOR ILLUSTRATIVE PURPOSES ONLY AND THE PRODUCT YOU HAVE BOUGHT MAY DIFFER FROM THEM.

PARTS

ASSEMBLY STEPS AND USE

|
---|---
|
|
|
|

WARNING!

• DO NOT USE IT ON MUDDY TERRAINS!!!!!
• ADULT ASSEMBLY IS REQUIRED. The product contains small parts, which are for adult assembly only. Keep children away when assembling.
• Always remove protective material and poly bags and dispose before assembly.
• CHOKING HAZARD-Small parts. Not suitable for children under 36 months.

SPECIFICATIONS

Outgoing: DC12V1000mA
Average battery life:| Approximately 300 times| Charge time:| 8 ~ 10 Hours
Use time:| 45 – 60 minutes| Speed:| 3 – 8 km/ h

WARNINGS AND RECOMMENDATIONS FOR SAFE USE

• Warning! To be used under the direct supervision of an adult.
• NEVER LEAVE THE CHILD WITHOUT ADULT SUPERVISION. Always monitor the child while it is using the battery-operated ATV.
• Warning! This toy is unsuitable for children under 3 years due to its maximum speed.
• Intended for children of 37 to 95 months of age with a maximum weight of up to 30 kg.
• This toy has no breaks.
• Use only as intended. The battery-operated ATV is a toy – it is not intended to transport people over long distances or luggage and etc.
• Adult assembly is required.
• Children under 3 years of age are not to be present during the assembly of the ATV. Small parts. Risk of choking.
• Keep the packing away from children during the unpacking and afterward.
• The assembly and charging of the batteries must be made by an adult.
• Use with caution. Skill is required to avoid falls or collisions causing injury to the user or third parties.
• Warning! Protective equipment should be worn. Not to be used in traffic.
• The product is intended for use only by one child at a session.
• Never use on roads, close to cars, on or close to steep hills or stairs, pools, or other water bodies, muddy terrains, or swampy areas.
• Check regularly the condition of each part, since there is a risk of injuring your child in case of damage.
• Do not use the ATV if you find loose, worn-out, or damaged parts. The wheels must be moving freely.
• One must always use shoes during use. The child must not be barefoot during the use of the toy or with shoes with slippery soles.
• One must always sit on the seat. Do not allow the child to step on the seat or use the battery-operated ATV while standing up.
• Your child must not jump with the ATV from curbs or other higher parts or bump into them.
• You must teach your child and the other children, which are near the ATV, not to touch its wheels with their hands or other objects, while the ATV is moving.
• Do not tie or attach objects or accessories to the toy. This may lead to hanging, twining, and disturbance of the balance causing injuring your child.
• Do not modify any of the parts of the product!
• Keep away from direct heat sources – heathers, open fires, or others.
• Do not use the ATV on rainy days, and do not get it wet with water or other liquids during play or during cleaning. This will prevent the risk of damage to the toy due to rust on the metal parts or disturbing the stability of the connections.

RULES FOR SAFE DRIVING

The children must be in Safe Zones for driving:

• Not to be used on slopes or steep areas or stairs, near swimming pools or other water bodies.
• Use the toy on even ground and in safe areas only. Such as – in your home, park, or playground.
• Using the product behind vehicles, near or on high traffic, streets, rivers, slopes, escalators, or other dangerous places is strictly forbidden.
• Never use on lawns or other grass areas, on or near steep slopes.
• Avoid sandy or other hard and rough surfaces. Do not use it in poor weather (snow, rain, strong wind), at places that are poorly lit, or places with poor visibility or with obstacles.
• Never use it in the dark. Your child may encounter unexpected obstacles resulting in an accident. Use only during the day or at places that are well-lit.

It is forbidden to shorten the terminals of the electric cables or to add other electric parts.
Periodically check the wires, bushings, and connectors.
Do not allow children to touch the wheels or be close to them when the battery-operated ATV is in motion.
Some accessories of the ATV may get damaged during improper driving, be careful.
Do not use suddenly the forward/backward switch, while the ATV is in motion. It can be used only while the toy is stopped in place.
When restarting the motor there may be some sparks. It is forbidden to start an ATV in highly flammable and explosive environments such as petrol stations.
An adult must read this instruction carefully and give correct guidelines to children before playing with this product. Show them how to start and release the pedal, how to stop the ATV and how to act in case of malfunctions.
When you stop using the toy, turn off the power.
** Do not change anything in the body and parts of the product. This may lead to the destabilization of the toy and injury to your child.
The following must be confirmed before using the product:**

• Important! Before the use of the product for the first time, the battery must be charged for 8 – 10 hours, but no more than that. Only an adult can charge and recharge the battery.
• Check regularly all screws, nuts, and safety coverings and tighten them if necessary!
• Before each use check the seat. Whether it is correctly placed and mounted (installed) with the help of a screw.
• In order to avoid incidents, make sure that the battery-operated ATV is entirely safe before use.

IMPORTANT SAFETY INSTRUCTIONS

Battery/ Charger/ Alkaline batteries

1. The battery/ charger/ alkaline batteries are not toys and it is strictly forbidden for children to play with them.
2. Non-rechargeable batteries must not be recharged, do not recharge them.
3. Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc), or rechargeable (nickel- cadmium).
4. Only an adult must charge the batteries.
5. Remove the rechargeable batteries from the product before you start charging them.
6. Observe the correct polarity ± indicated at the battery compartment.
7. The discharged batteries must immediately be removed from the product.
8. Remove the batteries if you are not going to use the product for a long time.
9. Do not shorten the battery terminals.
10. Use only the rechargeable battery and charged provided by the manufacturer.
11. Do not use the battery or charger for other products, because this may lead to overheating, fire or explosion.
12. DO NOT OPEN the battery or charger.
13. DO NOT CHARGE the battery backward.
14. Always keep the battery dry. The battery or its components must not get in contact with fresh or salt water.

PARTS OF THE PRODUCT

See Figure PD: Before you start assembling the ATV, take all the parts from the packing. Check if all the parts are available.
Keep the packages until you finish completely the assembly.

A. Body – 1 pc;
B. Handlebar – 1 pc;
C. Front axle – 1 pc;
D. Wheel covers – 4 pcs;
E. Backrest – 1 pcs;
F. Rear axle – 1 pc;| G. Steering rod – 1 pc;
H. Front wheels – 2 pcs;
I. Rear wheels – 2 pcs;
J. Dashboard – 1 pc;
K. Charger – 1 pc;
L. Wrench – 2 pcs.
---|---

ASSEMBLY STEPS

• WARNING! Adult assembly is required.

• Note: Some parts might be pre-assembled in the factory.

• Care should be taken when unpacking and assembling the ATV.

• Warning! Risk of injury. Small parts and sharp edges. Do not allow the children to play with any of the parts or to help in
  the assembly of the vehicle.

• Identify all parts before assembly and save all packing material until assembly is complete to ensure that no parts are
  discarded.

• After each step, you must check if each part is correctly placed and well-fixed.

• Follow strictly each step and study well the assembly figures.

• DO NOT over-tighten in order to avoid any damage.

• Figure AG is shown the assembly sequence: FA – front axle; S – shim; FW – front wheel; N – nut; WC – wheel cover; SR – steering rod; D – dashboard; H – handlebar; B – backrest; RA – rear axle; RW – rear wheel.

1. Step 1 – Attach the steering rod and front axle – See Fig. 1: Gently turn the vehicle body upside down. There are 11 screws put on that part of the ATV body, where the front axle and steering rod must be attached. Remove the screws. Slide the steering rod through the corresponding opening in the ATV body. Use 3 screws and fix the black holder of the steering rod to the body. Place the front axle on the ATV body. Insert the bent end of the steering column into the hole on the front axle linkage. Insert eight screws through the front axle and into the vehicle body, and tighten them with a screwdriver.

2. Step 2 – Attach the rear shock absorbers – See Fig. 2: Lift the rear part of the ATV body to which are attached the rear gearboxes. The rear shock absorbers are attached to it. Find the plastic holder and the screw for fixing the shock absorbers.
   To it are attached 2 nuts and 4 washers. Take the screw out of the holder together with the washers and nuts. Fit the shock absorbers to the holder. Place on the screw 1 washer and then slide it through the right shock absorber. Attach again a washer and slide the screw through the plastic holder. On the other part of the screw attach a washer and slide the screw through the left shock absorber. Attach the fourth washer to the screw. Fix the shock absorbers with the nuts on both sides of the screw.

3. Step 3 – Attach the rear wheels – See Fig. 3: The rear gearboxes are pre-assembled. Take the rear axle and remove the washers and nuts from it. Slide the axle through the openings in the rear gearboxes. Place the rear wheels on both sides of the rear axle. Ensure the cogwheel wheels fit tightly to the grooves of the gearboxes. Put another washer and one nut on each side of the rear axle. Tighten the nuts with a spanner. Attach the wheel covers to the wheels.

4. Step 4 – Attach the front wheels – See Fig. 4: Remove the screws and nuts from the front axle. Attach the front wheels to the front axle. Then attach on each side of the axle a washer and nut. Fix the nuts with a spanner. Then attach the wheel covers to the wheels.

5. Step 5 – Attaching the dashboard – See Fig. 5: Turn the ATV body so that it stands on its wheels. Connect the dashboard cables to the cables in the ATV body. Then place the dashboard on the body. Its plastic pins must enter the corresponding openings in the body. Press carefully to fix the dashboard. You will hear a clicking sound. Be careful not to damage the cables.

6. Step 6 – Attach the handlebar – See Fig. 6: Remove the nut and screw from the handlebar. Fit the handlebar to the tip of the steering rod. Line up the holes on the handlebar with those on the steering rod. Fix using the screw, the nut, and the screwdriver.

7. Step 7 – Connect the Power Supply – See Fig. 7: Firstly, remove the seat. Then connect the red cable to the red battery terminal. Turn on the power button to check if there is electricity and if the connection was successful. If yes, re-attach the seat and fix it with the plastic button. TO AVOID DAMAGE TO THE ELECTRIC CIRCUIT, DO NOT CONNECT BLACK CABLE TO THE RED TERMINAL OR THE RED CABLE TO THE BLACK TERMINAL!

8. Step 8 – Attach the backrest – See Fig. 8: Place the backrest in the rear body of the ATV. The plastic pins of the backrest must enter the corresponding openings in the ATV body. Press down carefully to fix it. You will hear a clicking sound.

HOW TO OPERATE THE BO ATV

See Fig. U – On it are shown the different buttons:

1. USB jack – to connect flash driver or your phone;

2. TF slot – to insert SD card;

3. MP3 jack – to connect to MP3 Player;

4. Battery display – shows the left charge in the battery;

5. Buttons for music, volume up and down;

6. Lights switch;

7. High-low speed switch: the ATV moves at high speed only in forward mode.

8. ▲Forward-Stop-▼Back switch:
   ● To move the ATV forward, switch the button to position ▲Forward and press the foot pedal. If you release the foot pedal, the ATV will stop moving.
   ● To move the ATV backward, switch the button to position ▼the Back and press the foot pedal. If you release the foot pedal, the ATV will stop moving.
   WARNING! Always stop the ATV when changing the direction of movement or the speed in order to avoid damage to the gearboxes or motors.
   **** When turning the handlebar you control the turning left and right of the ATV.

9. Power button: Turn the power on and off.

Do not put the MP3 player or your phone close to your ears and do not listen to loud music, because this may lead to impairment of hearing.

CHARGING THE BATTERY

ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERY!
WARNING

• IN ORDER TO AVOID FIRE AND ELECTRIC SHOCK:
  -NEVER USE a battery or charger of another brand or another product. Always use only the rechargeable battery and adapter provided with the bought product.
  -Do not place the battery or adapter for another product. This may result in overheating, fire or explosion.
  -NEVER change the electric current. Making any changes to it may lead to a short circuit, fire, or explosion or the system may permanently get damaged.
  -Do not allow Your child to charge the battery.
  -DO NOT ALLOW DIRECT CONTACT BETWEEN THE TERMINALS OF THE BATTERY. THIS MAY LEAD TO FIRE OR EXPLOSION.

• During the charging of the battery explosive gases, heat, or flammable substances accumulate. Charge the battery in well-ventilated places ONLY.
  -Never pick up the battery by its cable or adapter. This may lead to damaging the battery resulting in a fire. Pick the battery by the corpus ONLY.
  -Do not turn the battery backward.

• Always secure and fasten the rechargeable battery with the bracket. Otherwise, the battery can fall and injure the child, if the battery-operated ATV upturns.

• The battery terminals, connectors, and parts related to them contain lead and lead components, chemicals, which according to the state of California can cause cancers and reproductive disabilities. Always wash your hands after handling the battery.

• Only an adult can handle and charge the battery. The battery is heavy and contains lead acid (electrolyte). Dropping the battery may lead to permanent damage to the battery or serious injuries.

• Do not let the battery discharge entirely. You must recharge it after each use or once a month if you are not going to use it regularly.

• Before you start charging the product you must check whether the adapter, battery, and cables are in good working order. If there is damage on any of these parts, you must stop using them, until the damage is removed.

• It is normal for the adapter to get heated during charging, but if the adapter gets very hot, you must stop charging and check the adapter and battery.

• Do not open the battery. The battery contains lead acid and other materials, which are toxic and corrosive.

• Do not open the adapter! The exposed wires and electric components of the adapter may cause electric shock.

• Before you put the battery-operated ATV in storage, you must charge its battery completely. After that every 3 months you must charge it, in order to prolong its life.

• The charging socket is situated under the handlebar of the ATV.

• During charging the ATV is not usable, because the current of the electric system is stopped.

• When the battery-operated ATV starts moving more slowly, you must recharge the battery.

• After each use or at least once a month you must recharge the rechargeable battery between 8 and 10 hours, but NOT MORE than 18 hours.

• Switch OFF the POWER BUTTON before charging.

• Do not shortcut the battery terminals.

• The charger and the battery are not toys. Do not allow the children to play with the charger and the battery.

• Use only the battery and charger, which are recommended by the factory.

1. Turn off the ATV. Plug the charger port into the charging socket on the ATV.
2. Plug the charger plug into a wall outlet. The battery will begin charging.

TROUBLESHOOTING GUIDE

IMPORTANT! Read the manual and the troubleshooting guide completely. If there is damage, do not try to repair the battery operated ATV. For this purpose, contact the shop, from which you bought the product or the importer.

1. Problem 1: The ATV does not move.
   • Cause 1 – The battery is exhausted. Charge it.
   • Cause 2 – When the ATV is overloaded or due to improper use, the fuse will switch off automatically. If this happens, wait for several minutes without using the product. The fuse will switch on automatically.
   • Cause 3 – You haven’t pressed the power button correctly. Use the ATV correctly according to how it is described in this manual.
   • Cause 4 – The battery cable has fallen off. Re-connect.
   • Cause 5 – The cables of the electric circuit are broken or damaged. For repairs, contact the store you bought the product from.
   • Cause 6 – The driving motor is damaged. The ATV must be examined and repaired by a professional. Contact the store you bought the product from.

2. Problem 2: The battery cannot be charged.
   • Cause 1 – The socket of the battery is loose. Make sure that the cables of the electric circuit are connected to the terminal of the battery.
   • Cause 2 – The charger is not connected correctly. Make sure that the charger is plugged into an ATV socket correctly.
   • Cause 3 – The charger is damaged. Contact the shop you bought the product from.

3. Problem 3: The time for use of the ATV is short.
   • Cause 1 – The time for charging the batter is shortened. Charge the battery for the recommended time and not shorter, or charge every time after each use. The charging must be done at least once a week. Charge for 8 – 10 hours, but not more than 18 hours.
   • Cause 2 – The battery is old and cannot hold a charge anymore. Change with new. Contact the store you bought the product from.

4. Problem 4: During charging the charger is warm and there is a buzzing sound from it.
   • Cause – This is due to a chemical reaction. You should not be worried as this is a normal chemical process.

5. Problem 5: Low speed
   • Cause 1 – The battery is old and cannot hold a charge anymore. Change with new. Contact the store you bought the product from.
   • Cause 2 – The battery is dead. Re-charge it.
   • Cause 3 – Overload. Reduce the load to 30 kg.
   • Cause 4 – The surface, on which the ATV is being used, is not even. Use the product only on even surfaces.

CLEANING AND MAINTENANCE OF THE PRODUCT

Cleaning:

1. Do not clean the product with a hose. Do not wash it with water and soap. Do not use the ATV, when it rains or snows. Water may damage the motor, electric system, or battery.
2. Clean the battery-operated ATV with a soft, dry cloth only. In order to restore the shine of the plastic parts, use a polishing agent for furniture WITHOUT wax. Do not use strong abrasive cleaning agents.

**Maintenance and storage:**

1. The responsibility to check the main parts of the toy before use is entire to the parents/ adult. Regularly check for potential risk of damage/injury – the battery, adapter, electric cables or wires, bushings, screws, body, moving systems, wheels, fastening components – whether they are in good working condition or not, whether there is any damage, broken or chipped parts. If you find any, you must stop using the product, until the damage is removed. Contact the shop you bought the product from or the importer.
2. Make sure that the plastic parts of the toy are not cracked or broken.
3. From time to time use lubricating oil, in order to oil the moving parts such as wheels and moving connections. You must apply a very thin layer of the oil and be careful while applying it.
4. Store the ATV in an upright position only, do not turn it upside down, and do not tilt it. Park the battery-operated ATV indoors or cover it with sailcloth, in order to protect it in humid weather.
5. When you are not going to use the product, you must store it in a dry, cool, and well-ventilated place. Do not store the product close to sources of heat – open fire, heating devices, or cookers, and also in humid places.
6. FOR ADULTS ONLY: recharge the battery after each use. Recharge the battery at least once a month, when you are not using the battery-operated ATV.
7. When the battery-operated ATV is not being used, all-electric sources must be switched off. All switches must be in the zero position or in the “stop” position. Disconnect the bushings of the battery’s cables.
8. If you are not going to use the product for a long time, you must charge the battery completely, before you put it for storage. You must charge the battery every three months in order to prolong its life.
9. Before you put the ATV for storage you must switch the power button OFF, and remove the cables from all bushings and the rechargeable battery of the ATV. Store it at a suitable place (dry, cool, and well-ventilated place). Do not allow children to play close to the battery.
10. IMPORTANT! DO NOT MAKE ANY CHANGES TO THE BODY OF THE ATV AND ITS MAIN PARTS AND ALSO THE ELECTRIC INSTALLATION! This may lead to damage to the ATV, improper operation, and risk of injury to the child. These parts must be maintained by an expert–authorized repair shop or importer.
11. Do not charge non-rechargeable batteries, and do not mix old and new or different types of batteries. Observe the correct polarity while placing the batteries.
12. Do not change the structure of this product and its electric system. Any changes must be performed under the guidance of a technician only. In case of a problem contact the shop you bought the product from or the importer.

REPLACING OF THE BATTERY AND DISPOSAL OF THE EXHAUSTED BATTERY

Your battery at one point will lose its ability to hold a charge. Depending on the amount of use and varying conditions, the battery should be used between one and three years. In order to replace the battery and remove the discharged one, follow the steps below:

1. Remove the seat of the battery-operated ATV.

2. Remove the jacks of the battery’s cables.

3. Remove the metal bracket that protects the battery from falling.

4. Remove the lid of the battery compartment.

5. Carefully lift the battery.

6. Depending on the state of the battery (for example leakage) you may have to wear protective gloves before you remove the battery.
   • Do not lift the battery by its terminals or cables.

7. Place the discharged battery in plastic packaging.
   • Important! The sealed lead-acid battery must be recycled or thrown away in an ecologically friendly manner for the purpose of avoiding pollution of the environment. The battery contains lead acid (electrolyte) and must be discarded in an environmentally friendly manner in accordance with the regulatory requirements.
   • DO NOT throw the rechargeable battery away in a fire, because it may explode or leak.
   • DO NOT throw the lead-acid battery in the containers for household waste. The incineration (burning), landfilling, or mixing of sealed lead-acid batteries with household waste is forbidden by law.
   • The discharged rechargeable battery can be given at the local recycling center for recycling or at a center for the sale of such batteries.

8. Replace the battery with a new one and reconnect all cables and terminals.

9. Place the metal bracket protecting the battery from upturning or falling back on.

10. Return the seat of the battery-operated ATV back in place.

MADE FOR MONI
Producer: Moni Trade Ltd.
Address: Bulgaria, city of Sofia, Trebich quarter, Dolo str. 1
Tel: +359 2/ 936 07 90;
Web: www.moni.bg

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>