HOOKE ROAD BXG.7003-S Gladiator Front Winch Bumper and Rear Bumper Kit Installation Guide

HOOKE ROAD BXG.7003-S Gladiator Front Winch Bumper and Rear Bumper Kit

Product Specifications

• Model: BXG.7003-S
• Contents:
  • 4 Split Lock Washer
  • 8 Flat Washer
  • 4 Hex Nuts
• Size(mm): D12
• Picture: M12302

Tools Required

• 19mm Shallow Socket
• Drive Socket Ratchet Wrench

Installation Time

About 1 hour, 1-2 people may be needed. Installation time may differ according to your mechanical skill level.

(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)

Installation Instructions

1. Step 1: Please read all instructions thoroughly before starting installation.
2. Step 2: Remove your factory bumper from the frame by taking out the (2) bolts on each side of the outer frame rail. Keep these bolts for reinstallation.
3. Step 3: Ensure all wiring is disconnected and remove the old bumper.
4. Step 4: Remove the trailer hook from the original car as shown in the picture.
5. Step 5: Lift up the rear bumper and install it into your vehicle using the provided Split Lock Washer (D12), Flat Washer (M12302), and Hex Nuts (M12).
6. Step 6: Install the D-rings into the bumper.
7. Step 7: The installation is complete. Enjoy your off-road adventures with this Hooke Road product!

Attention:

1. The product parts in this instruction may differ slightly from the actual product contents but generally do not affect installation.
2. Please contact your distributor if you have any questions about your purchase.

FAQs

• How do I know if the rear bumper is compatible with my vehicle?
  It is recommended to check the product specifications and consult with your vehicle manufacturer or distributor to ensure compatibility.

• Can I install the rear bumper by myself?
  While it is possible to install the bumper alone, having assistance from another person is recommended to make the process easier and safer.

Contents

Tools required

• 19mm Shallow Socket;
• Drive Socket Ratchet Wrench

Installation time

• About 1 hour, 1-2 people may be needed. Installation time may differ according to your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
• To view the electronic version (BXG.7003-S), please scan the QR code.

Installation instruction

• Step 1:
  Please ready all instructions thoroughly before starting installation.

• Step 2:
  Remove your factory bumper from the frame by taking out the(2) bolts on each side of the outer frame rail. Make sure to keep these bolts for reinstallation of your new bumper.

• Step 3:
  Make sure all wiring is disconnected, remove and discard your rear bumper.

• Step 4:
  Remove the trailer hook of the original car. As the picture shown.

• Step 5 : Lift up the rear bumper and install it into your vehicle with the Split Lock Washer (D12), Flat Washer (M12302), Hex Nuts (M12).

• Step 6: Install the D-rings into the bumper.
• Step 7: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Attention:

1. The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
2. Please feel free to contact your distributor if you have any kind of question about your purchase.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>