FridayParts B0CG1QJT29 Sleek Design Stand Instruction Manual

FridayParts B0CG1QJT29 Sleek Design Stand

Dimensions

Width -66.93inch
Depth -13.78inch
Height -16.53inch

Important – Please read these Instructions fully before starting assembly

 Safety and Care Advice

Important – Please read these instructions fully before starting assembly

• Check you have all the components and tools listed on the following pages.
• Remove all fittings from the plastic bags and separate them into their groups.
• Keep children and animals away from the work area, small parts could choke if swallowed.
• Make sure you have enough space to layout the parts before starting.
• During assembly do not stand or put weight on the product, this could cause damage.
• Assemble the item as close to its final position (in the same room) as possible.
• Assemble on a soft level surface to avoid damaging the unit or your floor.
• Parts of the assembly will be easier with 2 people.
•  To reduce the likelihood of damaging your product please ensure that your power drill is set on a low torque setting.

Care and maintenance

• Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.
• From time to time check that there are no loose screws on this unit.
• This product should not be discarded with household waste. Take to your local authority waste disposal centre.

Handy Hints

• Assemble all parts and bolts loosely during assembly, only once the product is complete should you fully tighten the bolts.
• Regularly check and ensure That all bolts and fittings are tightened properly.

WARNING
In order to help prevent overturning please follow these instructions

To help prevent product toppling over please follow the below steps:-

Use the anti tip step or wall fixing method provided (if applicable).
Do not allow children to climb or hang on the furniture.
Do not open more than one drawer at a time.
Do not place heavy items in the top drawers.
Do not place heavy items on top of the furniture, unless the furniture has been designed for this purpose.

Components – Fittings

Please check you have all the panels listed below

Note:The quantity below are the correct amount to complete the assembly. ln some cases more fittings may be supplied than are required.

Tools required

• Phillips screwdriver (medium & large)

Using Cam Locks

Step 1

Connect the male camlock as directed in the assembly instructions using a screwdriver.
DO NOT OVER TIGHTEN.

Step 2

Push the male camlock into the entry hole.

Step 3

Insert the female camlock as shown in the instruction.
Note： ensure that the arrow on the top of the camlock points towards the entry hole for the male camlock.

Step 4

Turn the female camlock clockwise with a screwdriver. You should feel a click when the cam lock is locked in place. The joint is now secure.

Assembly Instructions

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

**Step 7

**

**Step 8

**

Step 9

Step 10

Step 11

Step 12

Step 13

Documents / Resources

| FridayParts B0CG1QJT29 Sleek Design Stand [pdf] Instruction Manual
B0CG1QJT29 Sleek Design Stand, B0CG1QJT29, Sleek Design Stand, Design Stand, Stand
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>