eMoMo Mini iTable 2 Wireless Charger User Manual

Mini iTable 2 Wireless Charger
User Manual

Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come loose inside the carton during shipment. Before using, please read this operation manual thoroughly in order to understand the correct methods of usage, especially taking note of the section on safety, it is important. This manual should be kept on hand for easy reference. It is your guide to a safe and efficient operation. Using the product properly could prolong the life circle.

CAUTION

• Please use the original power supply provided by the manufacturer.
• To prevent you from burns or electric shock, the unit should never be left unattended when plugged in. Always unplug the unit when it is not in use.
• Never operate the unit if it has a damaged power or plug.
• Please unplug it and contact the store if it is not working properly, if it has been dropped or damaged, or if it has been immersed in water.
• Keep power cords away from heated surfaces and never use it if it has a damaged cord.
• Please remove the cup or bottle on the dynamic cup holder before up or down the dynamic cup holder, please do not up or down the dynamic cup holder if it is loaded.
• Do not drop or insert anything into any of the openings of the unit.
• Liquids. Should not be spilled on the control panel.
• Indoor use only, do not put it into direct sunlight exposure.
• The unit contains no user-serviceable parts and opening or disassembling any parts of it may cause an electric shock or injury.
• Persons with any of the below conditions or who are undergoing medical treatment should consult with their physicians before using the unit: Pregnant women, People who have a pacemaker or any other person who is susceptible to electrical interference.
• The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, Unless they have been given supervision or instruction
• Children should be supervised to ensure not to play with the appliance
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• If you meet a problem during use, please refer to the “Common Trouble Shooting” to remove it, if the “Common Trouble Shooting” not mentioned the problem your meet, please contact customer service immediately. Please do not repair by yourself, otherwise, it will be deemed to waive the warranty.
• In order to offer the best service, products will keep upgraded when necessary, the changed information will not inform by individual. Please keep the latest version as well.

MAIN PANEL

1. Wireless charging indication light: a: When plugged into a power source, the light quickly flashes 3 times and went off now the power is connected successfully. The light may flash metallic stuff or some special stuff on the wireless charging area.
   b: Light up when charging; Light off when fully charged.

2. Recliner control button:

3. Recline,

4. Close,

5. Headrest up,

6. Headrest down

7. Lumbar up, DLumbar down

8. Reset.

9. Power ON/OFF: Touch and hold to power on, all buttons light up; Touch and hold to power off, all buttons light off.

10. USB charging port.

11. Dynamic cup holder control button.

12. Audio player button:

13. Play/Pause,

14. volume ‘-

15. Bluetooth volume ‘+’

16. Wireless charging: Place your phone on the center of la to charge your phone.

Note: Function 0-(Dare optionable, some seen in the illustration may not have been used in the design of your product.

BLUETOOTH AUDIO PLAYER

Operation Guidance

The Bluetooth indicator flashes quickly, it is on standby for pairing; Touch and hold to cut off the Bluetooth connection
  Tap to play or pause
Decrease volume
Increase volume
Bluetooth Pairing
Pair ‘iTable mini 2’ to a smart device

1. Plug’ iTable mini 2′ into a power source and power on .
2. As soon as power is on, the Bluetooth indicator flashes quickly, it is on standby for pairing.
3. Enable the Bluetooth on your smart device then search for “able mini2”, tap it to connect your device to enable mini2. If it is paired successfully, the indicator will turn to green or blue and stop flashing, “connected ” sound also be played
4. If the Bluetooth indicator flashes quickly in 5s but still no smart device is connected successfully, the Bluetooth indicator stops flashing but is still on standby for pairing.

WIRELESS CHARGING PAD

Wireless charging indicator .
Align the receiver of your phone to the center of ‘ 0 ‘, it will charge the phone automatically.
The ‘U light illuminates, it is charging
The ‘U light’ flashes during charging, there’s interference nearby or it doesn’t work well, please try to move your phone around the’ 0 ‘ or take away the interference matter till the ‘U light’ stops flashing.

USB Charging

USB: Connect your smart device to the USB with an USB cable, it will charge for your device.

FUNCTIONAL RECLINER

Touch and hold to recline the chair
Touch and hold to close the chair
Touch and hold to raise the headrest
Touch and hold to lower the headrest.
Touch and hold to raise the lumbar.
Touch and hold to lower the lumbar
Touch and hold to make the chair move to the Home position.
Dynamic cup holder

Touch up/ down the dynamic cup holder
Note: Functions are optionable, some of the functions seen in the illustration may not have been used in the design of your product.

2. The power cord isn’t plugged properly. Re-plug it.
3. The unit did not be turned on, touch and hold 0 to turn on the unit.
3luetooth can not be paired| 1. It has been connected to another device. Touch and hold MI to disconnect the previous device the try to connect it.
2. Avoid pairing the Bluetooth behind a wall or in a corner. Keep the working space in 8M.
Jo sound at all| 1. The volume is at the minimum setting. Touch 4))) to increase the volume.
2. The unit is in a headphone set. Disconnect the headphone.
The chair could not be powered| 1. The wires for the motors underneath the chair may be disconnected. Check all connectors and reconnect them if it is necessary.
dynamic cup holder nonlevel o the panel| 1. Touch up and down the cup holder several times with nothing loaded till the cup holder is on the same level as the panel.
2. Please attention that does not raise or down the cup holder if there is something loaded on the cup holder next time.
be wireless charging pad does lot work at all or does not work yell| 1. If Your device does not have a wireless charging receiver, attach a receiver to the device. Qi certificated receiver is recommended.
2. The receiver of your phone is not aligned to the 0 , try to move around.

If you have tried all the actions but it still does not work well, please call the retailer for after-sale service.
Do not try to disclose and repair by yourself.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>