OPTOKON LMCP-28H Antivibration Holder Installation Guide
- June 15, 2024
- OPTOKON
Table of Contents
OPTOKON LMCP-28H Antivibration Holder
Product Information
Specifications:
- Compatible devices: LMB-1-4, LMB-7
- Dimensions (W x D x H): 330 x 380 x 210 mm (225 mm with connector)
- Weight: 7.85 kg
- Fans: 2x 4.1 W
- Power supply: Standard vehicle onboard wiring system
- Power connector type: 62GB-12E08-33PN
Features:
- LMCP-28H computing platform
- LMSW-E33 rugged switch or LMSR-R63 rugged router
Silent Block Specification:
- Supported device: LMCP-28H, LMSW-E33-82P switch, LMSR-R63 router, LMCP-7H
- Stationary application:
- Static load: 14-35 kg
- Natural frequency: 16-25 Hz
- Mobile application:
- Static load: 7-14 kg
- Natural frequency: 25-35 Hz
Trademark Information:
“ACT_03-22_EN-LMCP base” is a registered trademark of OPTOKON, a.s. Other names and trademarks mentioned herein may be the trademarks of their respective owners.
Contact Information:
OPTOKON, a.s., Cerveny Kriz 250, 586 01 Jihlava, Czech Republic
- Tel: +420 564 040 111
- Website: www.optokon.com
- Email: info@optokon.cz
- Product Usage Instructions
Installation:
- Choose the appropriate base for your device – LMB-1-4 or LMB-7.
- Place the LMCP-28H or LMCP-7H computing platform on the base.
- If using the LMB-1-4 base, also mount the LMSW-E33 switch or LMSR-R63 router on it.
- If using the LMB-7 base, stack the LMCP-7H and LMSW-E33 switch (or LMSR-R63 router) on it.
Usage:
The OPTOKON LMB-1-4 and LMB-7 bases are designed to protect and support the
installed devices. The bases are equipped with silent blocks to dampen
mechanical stress and reduce impact during operation.
The LMB-1-4 base also features two fans on the rear panel for better heat
dissipation. The power supply for the fans can be ensured from a standard
vehicle onboard wiring system.
Frequently Asked Questions (FAQ)
-
What devices are compatible with the LMB-1-4 base?
The LMB-1-4 base is compatible with the LMCP-28H computing platform and the LMSW-E33 rugged switch or LMSR-R63 rugged router. -
What devices are compatible with the LMB-7 base?
The LMB-7 base is compatible with the LMCP-7H computing platform and the LMSW-E33 switch or LMSR-R63 router. It can be used to stack these devices together. -
How do I mount the devices on the bases?
For the LMB-1-4 base, place the LMCP-28H computing platform and mount the LMSW-E33 switch or LMSR-R63 router on it. For the LMB-7 base, stack the LMCP- 7H and LMSW-E33 switch (or LMSR-R63 router) together.
Description
The OPTOKON LMB-1-4 base is a frame for mounting the LMCP-28H and the LMSW-E33
switch. The base is equipped with 4 silent blocks and is designed to protect
the device under mechanical stress, especially to dampen the impact of the
entire device during operation. In addition the LMB-1-4 base is equipped with
two fans on the rear panel, which serve for better heat dissipation from the
installed equipment. Power supplying of fans might be ensured from standard
vehicle onboard wiring system.
The smaller LMB-7 antivibration holder can be used for LMCP-7H, LMSW-E33
switch or LMSR-R63 router and for stack of these devices
Features
- Rugged design for protection of mechanical stress and impacts
- Four silent blocks for impact-damping
- Two fans for device cooling
- Mounting holes for installation screws M6 size
- Grounding pin
- Suitable for installation of two devices:
- LMCP-28H computing platform
- LMSW-E33 rugged switch or
- LMSR-R63 rugged router
Parameters
| Compatible device | LMSW-28H: all variants |
|---|---|
| LMSW-E33: LMSW-E33-82P/MRJ, LMSW-E33-82P/D38999 | |
| LMSR-R63: all variants | |
| Dimensions, W x D x H | 330 x 380 x 210 (225 with connector) mm |
| Weight | 7.85 kg |
| Fans | 2x 4.1 W |
| Power supply | 12 – 30 V DC |
| Power connector type | 62GB-12E08-33PN |
| Silent block | 4 pcs |
| Specification: | Stationary application |
| Static load | Natural frequency |
| 14-35 kg | 16-25 Hz |
Supported device
Registered trademark of OPTOKON, a.s. Other names and trademarks mentioned
herein may be the trademarks of their respective owners.
ACT_03-22_EN-LMCP base 18/05/2023
OPTOKON, a.s. reserves the right to make changes, without notice, to the
products described in this document, in the interest of improving design,
operational function and/or reliability. OPTOKON, a.s., Cerveny Kriz 250, 586
01 Jihlava, Czech Republic tel. +420 564 040 111,
WWW.OPTOKON.COM,
INFO@OPTOKON.CZ
LMB-1-4 Base – frame for LMCP-28H & LMSW-E33 (or LMSR-R63)
Dimensional view
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>