StarTech com FD121-KVM DisplayPort KVM Extender Over Fiber Optic Instruction Manual

StarTech com FD121-KVM DisplayPort KVM Extender Over Fiber Optic

Instruction Manual

Product Diagram

FD121-KVM-EXTENDER

Transmitter

Adapter
3| Fiber Connection Port| •       Use an LC-Terminated Fiber Cable** to connect the

Transmitter and Receiver

4| Video Input Port| •       Connect a DisplayPort Video Source
5| USB Host Connector| •       Connect to an available USB Port on the Host Computer or HID Port on a KVM Switch

6

|

USB Status LEDs

| •       Orange when USB Devices are connected

•       (Flashes 1~4 times to indicate connected USB Device number)

7| Video Output Port| •       Connect a DisplayPort Display Device
8| USB-A HID Ports| •       Connect USB Devices (e.g. Keyboard, Mouse, Trackpad, Number Keypad, or Drawing Tablet)

Requirements

For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.StarTech.com/FD121-KVM- EXTENDER

• Computer
• USB Enabled
• DisplayPort Output
• USB Keyboard and Mouse
• DisplayPort Display Device
• Duplex LC Fiber Cable (OM3)
• Multimode extends up to 300M

Package Contents

•  Transmitter (Local Unit) x 1
• Receiver (Remote Unit) x 1

* Product may vary from image

• 10G Multimode SFP+ Modules (Pre-Installed) x 2
• Universal Power Adapter (NA/EU/UK/ANZ) x 2
• USB-A to Mini USB-B Cables x 3
• Quick-Start Guide x 1

Installation

1. Power off all Devices (e.g. DisplayPort Video Source , Computer , ) that will be connected to the Transmitter and Receiver.
2. Connect the Host Device and all of the USB Peripherals to the Transmitter and

Receiver.

3. Connect a DisplayPort Monitor to the Video Output Port on the Receiver , using a

DisplayPort Cable (not included).

4. Connect a Computer or KVM Switch to the Video Input Port on the Transmitter , using a DisplayPort Cable (not included).
5. Connect the Transmitter to the Receiver , using a Duplex Multi-Mode LC Fiber Cable (OM3).

Note: The cabling cannot go through any networking equipment (e.g., router, switch, etc.). Ensure the transmit and receive fiber leads are reversed between the Local and Remote Unit.

6. Connect the Transmitter and Receiver to Power Sources , using the included

Universal Power Adapters.

7. Power on all the Devices (e.g. DisplayPort Video Source , Computer , etc.) connected to the Transmitter and

Regulatory Compliance

FCC – Part 15

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Connect the equipment into an outlet on a circuit different from that to which the receiver is
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada Statement

This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada
CAN ICES-3 (A)/NMB-3(A)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

Operation

LED Indicators

Warranty Information

This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss
of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

StarTech.com Ltd. 45 Artisans Crescent London, Ontario
N5V 5E9
Canada

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>