Kinderkraft Cutie Balance Bike User Manual

Kinderkraft Cutie Balance Bike

Product Information

• Model: CUTIE
• Rev. 1.2

All rights to this data are entirely reserved to 4Kraft Sp. z o.o. Any unauthorized use or misuse, including usufruct, copying, duplication and sharing, wholly or partially, without consent of 4Kraft Sp. z o.o. may result in legal consequences.

Product Usage Instructions

1. Before each use, check that all connecting parts (bolts, nuts) are in good fit. Keep small parts out of reach of children.
2. To assemble the bike, follow these steps:
3. Attach the axle with mounted front wheels and handlebar mounting screw (A).
4. Attach the handlebar (B).
5. Attach the saddle (C).
6. Attach the frame with rear wheel (D).
7. Use the mounting wrench set (E) to tighten all connecting parts.
8. Clean the product with a damp cloth or sponge. Protect from dust, moisture, water, high and very low temperatures, falls, etc.
9. Store the product in a safe and dry place to prevent damage from dust, moisture, water, high and very low temperatures, falls, etc.

Note: It is important to keep this manual for future use.

All rights to this data are entirely reserved to 4Kraft Sp. z o.o. Any unauthorized use or misuse, including usufruct, copying, duplication and sharing, wholly or partially, without consent of 4Kraft Sp. z o.o. may result in legal consequences.

The illustrations are for illustration only and do not represent the product.

Dear customer
Thank you for purchasing a Kinderkraft product.

We design our bicycles with your child in mind – we always care about safety and quality, which guarantees that with the purchase of our products you get the comfort of the best possible choice.

IMPORTANT! IT IS IMPORTANT TO KEEP THIS MANUAL FOR FUTURE USE

SAFETY INSTRUCTIONS AND PRECAUTIONS

Attention:

• Compliance with the user manual ensures safe use of the toy. Read the user manual carefully before using the bike and keep it for future use. Recommended age: 1+.
• Use personal protective equipment such as helmets, gloves, elbow pads and knee pads. This product is intended for outdoor use. Do not use in road traffic. The kid’s cruiser bike should not be used near motor vehicles, streets, swimming pools, hills, roads, stairs or on uneven ground.
• Use the toy on flat, obstacle-free surfaces.
• To avoid serious injuries, continuous adult supervision is necessary.
• To avoid falls and collisions causing injury to the user or others, parents/guardians should draw children’s attention to the safety precautions to be taken. Before using the product, it is important to explain to children how to use it safely.
• The person using the product must always wear shoes.
• Assembly must always be carried out by an adult. Before each use, check that the item is not damaged or worn and that all assembly and fastening parts are in good condition. Ensure that the bolts and nuts retain their auto-locking properties. Check that the assembly is complete and in good condition. If you notice that some parts are missing or damaged, do not use the product, but contact your retailer.
• Be careful when riding bicycles, you should know how to ride to avoid falls or collisions that could cause injury to the user or a third person.
• The safest areas for the persons using the bicycle are those with little or no vehicular traffic, such as private areas, playgrounds, schoolyards, and school playgrounds.
• This product is intended for a user with a minimum height of 74 cm and a maximum weight of 15 kg.
• Keep the packaging or dispose of it in accordance with local regulations.
• For the safety of children, do not leave parts of the packaging freely accessible (plastic bags, cardboard boxes, etc.). Risk of suffocation!
• Not to be used by children over 36 months.

Bike components

• A. Axle with mounted front wheels and handlebar mounting screw
• B. Handlebar
• C. Saddle
• D. Frame with rear wheel
• E. Mounting wrench set x2

Assembly of the bike

To mount the handlebar, first remove the screw from the front wheel axle (A) using the mounting wrench (E) and then place the axle in the hole under the frame (D) (FIG. 1A). Insert the handlebar (B) into the upper hole of the bike frame so that the stem of the handlebar is fully inserted into the axle of the front wheels (FIG. 1B). Connect the components with a screw (FIG. 2). Place the saddle in the tube on the bike frame and tighten it with the screw using the mounting wrench (FIG. 3). You can adjust the saddle height using the screw on the tube. Note that the minimum insertion mark of the seat post must be hidden in the tube (insert the saddle so that the arrow on the seat post is inside the tube) (FIG. 4).

CAUTION:
Before each use, check that all connecting parts (bolts, nuts) are in good fit. Keep small parts out of reach of children.

Maintenance and cleaning, storage

Clean the product with a damp cloth or sponge. Protect from dust, moisture, water, high and very low temperatures, falls, etc.

In the interests of our Clients – we are at your disposal! If you have a problem with the product you received, contact us in the most convenient way for you!

International:

• support@kinderkraft.com.
• (0048) 61 646 02 37
• www.kinderkraft.com.

4Kraft Sp. z o.. ul. Tatrzanska 1/5 60-413 Poznan, Poland.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>