H Koenig ACMX18 Accessories for Food Processor MX18 Instruction Manual

June 6, 2024
H Koenig

H Koenig ACMX18 Accessories for Food Processor MX18

GENERAL SAFETY MEASURES

Read this user manual carefully before use the appliance and save it for future reference.

  • Always unplug the appliance before you reach into the blender jar with your fingers or an object (e.g. a spatula).
  • Never use your fingers or an object (e.g. a spatula) to push ingredients down the feed tube while the appliance is running.
  • Be very careful when you handle the blades or inserts. Be especially careful when you remove them from the bowl or jar, when you emptythe bowl or jar and when you clean them. Their cutting edges are very sharp.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children should under no circumstances use, clean or maintain the equipment.
  • The appliance is for household use only. Keep the appliance out of the reach of children.
  • Do not allow children to use the appliance without supervision.
  • Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.
  • Never let the appliance run unattended.
  • Never connect this appliance to a timer switch in order to avoid a hazardous situation.
  • Do not use the appliance if the mains cord, the plug or other parts are damaged.
  • If the mains cord is damaged, you must have it replaced a service centre in order to avoid a hazard.
  • Always switch off the appliance by turning the control knob to 0.Switch off the appliance before you detach any accessory.
  • Unplug the appliance immediately after use.
  • Never immerse the motor unit in water or any other liquid, nor rinse it under the tap.
  • Wait until moving parts stop running before you remove the lid of the bowl or jar.
  • Do not exceed the maximum content indicated on the bowl or the blender jar.
  • The instructions for centrifugal juicers shall include the substance of the following.
  • Do not use the appliance if the rotating sieve is damaged.
  • Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • The accessories are use with the machine only. And the whole machine is use for food only.
  • Thoroughly clean the parts that come into contact with food before you use the appliance for the first time.
  • Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
  • To preserve and ensure a long life for your appliance, do not use it more than 3 minutes at a time. After 3 minutes of continuous use, let the motor cool for about 30 minutes before using it again.
  • This appliance may be used by children of at least 8 years of age, as long as they are supervised and have been given instructions about using the appliance safely and are fully aware of the dangers involved.
  • Cleaning and maintenance should not be carried out by children unless they are at least 8 years of age and are supervised by an adult.
  • Keep the appliance and its power cord out of reach of children under 8 years of age.
  • When using electrical equipment, safety precautions must always be taken to prevent the risk of fire, electric shock and/or injury in the event of misuse.
  • Make sure that the voltage rating on the typeplate corresponds to your main voltage of your installation. If this is not the case, contact the dealer and do not connect the unit
  • Please keep this document at hand and give it to the future owner in case of transfer of your accessories
  • The accessories must not be used if it has been dropped, it obvious signs of damage are visible or if it has leaks.

PRODUCT

H Koenig ACMX18 Accessories for Food Processor MX18
fig1

  1. Whisk
  2. Grinder and filter cover
  3. Small bowl mixer
  4. Citrus juicer
  5. Centrifugal juicer

USAGE

Once the desired accessories in place, remember to adjust the speed controller. If you want a slow movement, put the position: “little”. If you want a fast moving, put the contrary position. If you press the switch button, the unit starts, if you release it, it stops.

WHISK :
The whisk is used only for light mixtures such as egg whites, cream or milk. “Heavy” blends such as flour may damage the accessory.

GRINDER :
Use the grinder to grind herbs, nuts and coffee beans.

  1. Put your ingredients into the bowl. Do not fill the bowl more than half.
  2. Fit the sealing ring on the base of the blades.
  3. Turn the base of the blades anticlockwise. Lower the blades into the bowl.
  4. Screw the base of the blades onto the bowl until they are tight.
  5. Place the grinder on the base of the appliance and turn to lock.
  6. Set the robot at full speed or use the “pulse” function.
  7. Once the grinding is set, you can replace the blades by the filter cover and shake your food.

CITRUS JUICER :
Use the juicer to extract the juice from your citrus (orange, lemon, grapefruit …)

CENTRIFUGAL JUICER :

Use the centrifugal juicer to make fruit and vegetable juices.

  1. Attach the rotating accessory and the bowl on the base unit.
  2. Lock the strainer into the inner bowl.
  3. Attach the inner bowl to the main bowl.
  4. Secure the lid onto the bowl and turn until it locks.
  5. Cut your food into small pieces to be able to insert them into the supply tube.
  6. Turn on your robot and push the food down with the pusher. Never put your fingers inside the supply tube. Wait until the feeding tube is empty before adding more food.
  7. After inserting all your ingredients, let the appliance run a little over 20 seconds to extract all the juice. 2
  8. Do not use your robot if the rotating strainer is damage

SMALL BOWL MIXER

H Koenig ACMX18 Accessories for Food Processor MX18
fig6

  1. Attach the rotating accessory and the bowl onto the base unit.
  2. Attach the small bowl mixer.
  3. Place the small knife blade onto the rotating accessory.
  4. Add ingredients into the bowl.
  5. Close the lid and turn on your robot.

CLEANING

Be sure to clean all accessories before the first use.

  • Turn off and unplug your appliance before cleaning.
  • Handle blades and cutting discs with care as they are extremely sharp.
  • Some foods can stain the plastic of your robot. This is quite normal and does not damage the appliance nor alter the taste of your dishes. Simply rub the plastic with a cloth soaked in vegetable oil to remove discoloration and clean surfaces in contact with food.
  • To clean the base of the robot, use a dry cloth.
  • You can clean different parts of the robot (except the base that contains the motor) with water and mild soap. When clean, wipe the parts with a dry cloth.
  • These accessories can be washed in the dishwasher, nevertheless repeated washing can damage the appearance and strength of plastics. A hand washing will prolong the life of your accessories.

ENVIRONMENT

CAUTION :
Do not dispose of this product as it has with other household products. There is a separation of this waste product into communities, you will need to inform your local authorities about the places where you can return this product. In fact, electrical and electronic products contain hazardous substances that have harmful effects on the environment or human health and should be recycled. The symbol here indicates that electrical and electronic equipment should be chosen carefully, a wheeled waste container is marked with a cross.
Adeva SAS / H.Koenig Europe – 8 rue Marc Seguin, 77290 Mitry-Mory, France
www.hkoenig.comhttps://en.hkoenig.com – Tél: +33 1 64 67 00 05

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

H Koenig User Manuals

Related Manuals