StarTech Com CMDUCT2U2 2U Horizontal Finger Duct Cable Management Panel for Racks User Guide

StarTech Com CMDUCT2U2 2U Horizontal Finger Duct Cable Management Panel

for Racks

Product Information

The 2U Horizontal Finger Duct Cable Management Panel for Racks is a cable management accessory that helps organize and route cables in a server rack. The package includes the cable management panel, mounting ears, duct cover, cable management fingers, and duct cover latches. The panel features pass- through holes at the rear and cable management fingers at the front, allowing for easy routing and organization of cables. The duct cover latches securely close the panel, ensuring that cables are protected and organized.

For more information on technical specifications, manuals, and declarations of conformance, please visit www.startech.com/CMDUCT2U2

Product Usage Instructions

1. Determine the U Height Number or Mounting Location on the Posts of the rack where to install the Duct Cable Management Panel.
2. Install the M6 Square Cage Nuts (x 4) onto the Square Cage Nut Holes on the chosen U Height Number. Use a Cage Nut Tool if available or your preferred installation method.
3. Align the Mounting Ears with the previously inserted M6 Square Cage Nuts on the rack posts.
4. Insert the M6 Plastic Washers (x 4) onto the M6x12 mm Screws (x 4). Use a Phillips Head Screwdriver to install the M6x12 Screws (x 4) and fasten the Duct Cable Management Panel to the Mounting Posts of the rack.
5. Insert the cables through the Cable Management Fingers and the Pass-through Holes at the rear. Organize as desired.
6. Latch and secure the Duct Cover using the Duct Cover Latches (x 4).

For more information on manuals, FAQs, videos, drivers, downloads, technical drawings, and more, please visit www.startech.com/support

This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Product Diagram CMDUCT2U2

Front View

the rack
2| Duct Cover| •     Keeps cables out of the way, and it can be removed for installation or upgrades
3| Cable Management Fingers| •     Allows cables to be inserted and held in place

•     Available along the length on both sides

4

|

Duct Cover Latches

| •     Each corner of the Duct Cable Management Panel has a latching mechanism that keeps the Duct Cover in place
5| Cable Path| •     Allow the inserted cables to run off to the side of the

Duct Cable Management Panel

Rear View

Holes as needed

Package Contents

• Horizontal Cable Duct x 1
• M6x12 mm Screws x 4
• M6 Cage Nuts x 4
• M6 Plastic Washers x 4
• Quick-Start Guide x 1

Requirements

For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.startech.com/CMDUCT2U2

• Phillips head screwdriver
• Cage nut tool (Optional)

Installation

1. Determine the U Height Number or Mounting Location on the Posts of the rack where to install the Duct Cable Management Panel.
2. Install the M6 Square Cage Nuts (x 4) onto the Square Cage Nut Holes on the chosen U Height Number. Use a Cage Nut Tool if available or your preferred installation method.
3. Align the Mounting Ears with the previously inserted M6 Square Cage Nuts on the rack posts.
4. Insert the M6 Plastic Washers (x 4) onto the M6x12 mm Screws (x 4). Use a Phillips Head Screwdriver to install the M6x12 Screws (x 4) and fasten the Duct Cable Management Panel to the Mounting Posts of the rack

Operation

1. Insert the cables through the Cable Management Fingers and the Pass-through Holes at the rear. Organize as desired.
2. Latch and secure the Duct Cover using the Duct Cover Latches (x 4).

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech. com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Warranty Information

This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Safety Measures

Read the entire manual and ensure the instructions are fully understood before assembling and/or using this product.

• StarTech.com Ltd. 45 Artisans Crescent London, Ontario N5V 5E9 Canada
• StarTech.com LLP 4490 South Hamilton Road Groveport, Ohio 43125 U.S.A
• StarTech.com Ltd. Unit B, Pinnacle 15 Gowerton Road Brackmills, Northampton NN4 7BW United Kingdom
• StarTech.com Ltd. Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

References

• 2U Finger Duct Cable Manager w/ Cover - Rack Cable Management | Server Rack Accessories | StarTech.com
• StarTech.com Support
• StarTech.com Warranty Policy

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>