StarTech com USB31000S USB 3.0 to Gigabit Ethernet Adapter User Guide

: October 30, 2023
: StarTech com

Table of Contents

Product Diagram
Package Contents
Installation
Regulatory Compliance
Warranty Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

USB31000S USB 3.0 to Gigabit Ethernet Adapter
User Guide

Product Diagram

USB31000S / USB31000SW
Top View

StarTech com USB31000S USB 3.0 to Gigabit Ethernet Adapter - Product
Diagram

Front View

*Product may vary from image

| Port/LED/Connector| Function
---|---|---
1| USB 3.0 Type-A Port| • Connect the Gigabit Ethernet Adapter to a USB-A port on the computer
2| Ethernet Port| • Connect a Network Cable to the USB 3.0 to Gigabit Ethernet Adapter
3| LED Indicators| • Indicates Link Speed and Activity
• Green LED Indicator is Link Activity
• Off = No network activity
• Flashing green = Network activity
• Amber LED Indicator is Link Detection
• Off = No network detected
• Solid Amber = Network detected

Package Contents

USB 3.0 Gigabit Ethernet Adapter x 1
Instruction Manual x 1

Requirements
For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.startech.com/USB31000S

USB enabled computer with available USB 3.0 port

Installation

Connect the Ethernet Adapter to a USB-A Port on the Host Computer. The Ethernet Adapter should auto-install using native drivers.
If the drivers do not auto-install, please follow the instructions below.

Download the Driver

Navigate to www.startech.com/USB31000S
Click the Drivers & Downloads tab.
Under Driver(s), download the Driver Package corresponding the Operating System installed on the Host Computer.

Install the Driver
Windows

Right-click the zipped Driver Package that was downloaded. Click Extract All. Browse to the newly created folder.
Note: Ensure to make a note of the location where the drivers were extracted. That location will be used on the next step.
Windows usually saves the files to the Downloads folder associated with the user account (e.g. C:\Users\useraccount\Downloads).
Open the folder corresponding to the Windows version installed on the Host Computer.
Right-click the Installer Setup file. Click Run as administrator.
Note: If the Run as administrator option is not available, you could be attempting to run the Installer Setup from within the zipped Driver Package. Extract the files using the instructions in Step 1 in the Install the Driver section.
Follow the on-screen instructions to install the Device Driver. Restart the Host Computer if prompted.

macOS

Double-click the downloaded file.
Open the folder corresponding to the macOS version installed on the Host Computer.
Run the Installer Setup file inside the folder.
Follow the on-screen instructions to install the Device Driver. Restart the Host Computer if prompted.

Linux

Extract the contents of the Driver Package.
Follow the instructions in the accompanying Readme file to finish the installation.

Regulatory Compliance

FCC – Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

This device may not cause interference, and
This device must accept any interference, including interference that may cause undesired operation of the device.

Warranty Information

This product is backed by a two years warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada| StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
---|---
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom| StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands