StarTech com RK12OD2 12U 19 Desktop Open Frame Rack 2 Post Free Standing Network Rack User Guide

: October 30, 2023
: StarTech com

Table of Contents

RK12OD2 12U 19 Desktop Open Frame Rack 2 Post Free Standing Network Rack
Package Contents
Requirements
Installation
Operation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RK12OD2 12U 19 Desktop Open Frame Rack 2 Post Free Standing Network Rack
User Guide Product Diagram (RK12OD2)
12U 19in Open Frame 2-Post Desktop Rack

RK12OD2 12U 19 Desktop Open Frame Rack 2 Post Free Standing Network Rack

StarTech com RK12OD2 12U 19 Desktop Open Frame Rack 2 Post Free Standing
Network Rack - fig

| Component| Function
---|---|---
1| Vertical Rails| • Feature Square Cage Nut Holes to mount your equipment
2| Front Base Bracket| • Stabilizes the frame and adds rigidity
3| Rubber Feet Holes| • Insert the Rubber Feet to protect the surface
4| Assembly Holes| • Used to connect the Vertical Rails, Front Base Bracket, and Base Brackets together
5| Base Brackets| • Stabilizes the frame and adds rigidity

Package Contents

Left Base Bracket x 1
Right Base Bracket x 1
Front Base Bracket x 1
Left Vertical Rail x 1
Right Vertical Rail x 1
M5x12 mm Assembly Screws x 8
M6x12 Screws x 48
M6 Cage Nuts x 48
M6 Plastic Washers x 48
Rubber Feet x 4
Quick-Start Guide x 1

Requirements

For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.startech.com/RK12OD2

Phillips head screwdriver
Cage nut tool (Optional)

Warnings!
Read the entire quick-start guide and ensure the instructions are fully understood before assembling and/or using this product.
Before adding equipment to this prouct, ensure this product has been properly assembled.
Never operate this product if parts are missing or damaged.
Ensure the weight of the equipment does not exceed the weight capacity of this product. If the weight capacity is exceeded, personal injury or damage to the equipment are possibilities. This product can support the following weight: 110 lb (50 kg).
This product poses a tipping risk.
The desk or table should be capable of supporting at least two times the weight of the mounted equipment.
Arrange your equipment in the rack in descending order of weight starting from the top. The lightest device is installed at the top of the rack and the heaviest device is on the bottom of the rack

Installation

Assemble the Rack

Push from the Top to Unlatch the Pins (x 4) from the center of the Rubber Feet (x 4).
Push the Rubber Feet (x 4) into the Rubber Feet Holes (x 4) on the underside of the Left Base Bracket and Right Base Bracket. Next, Push from the Bottom to Latch the Pins (x 4) back into the center of the Rubber Feet.
Align the Assembly Holes (x 2) on the side of the Left Base Bracket with the Assembly Holes (x 2) on the side of the Left Vertical Rail. (Figure 1)
Insert the M5x12 mm Assembly Screws (x 2) through the Left Base Bracket and into the Left Vertical Rail. Tighten the Assembly Screws (x 2) using a Phillips Head Screwdriver.
Repeat Steps 3 and 4 with the Right Base Bracket and the Right Vertical Rail.
Align the Assembly Holes (x 2) on the Front Base Bracket with the Assembly Holes on the front of the Left Base Bracket.
Insert the M5x12 mm Assembly Screws (x 2) through the Front Base Bracket and into the Left Base Bracket. Tighten the Assembly Screws (x 2) using a Phillips Head Screwdriver.
Repeat Steps 6 and 7 for the Right Base Bracket.

Operation

Arrange your equipment in the rack in descending order of weight. The lightest device is installed at the top of the rack and the heaviest device is on the bottom of the rack.

Install the M6 Cage Nuts onto the desired Cage Nut Holes where the Equipment will go. Use a Cage Nut Tool if available or your preferred installation method.
Use a Phillips Head Screwdriver to install the M6x12 mm Screws and secure the Equipment onto the rack.

Caution! Do not move the rack with the equipment mounted. If relocation of the rack is required, remove the equipment from the rack and relocate the empty rack. Mount the equipment back into the rack.
Safety Measures
• Read the entire manual and ensure the instructions are fully understood before assembling and/or using this product.

StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada| StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
---|---
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom| StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom