Shenzhen Haoshuo E Commerce H8 Vehicle Wireless Fast Charging Instruction Manual

Magnetic suction vehicle wireless fast charging
H8
Instruction Manual

Car Wireless Charger Manual

Product Name: Wireless fast charging of vehicle bracket (intelligent induction)
Power: 10W,7.5W,5W
Effective transmission distance: 1-8cm
Size: Middle disk diameter: 12.3cm x 7.3cm x 2.1cm
Charging interface: Type C
Packing list: Car bracket x 1, Manual Xl, Data line x1, Car outlet base(clip) x1 Magnetic suction head x 3

Functional Components

Specifications

1. Model: H8
2. Color: Black/Gold/Silvery
3. Weight: product net weight about118g
4. Material: PC+ ABS Vacuum Plating
5. Input voltage/current:12V/1.35A,11.5V/1.24A, 11V/1.15A
6. Output power: 10W,7.5W,5W automatic identification
7. Working frequency: 111K-205KHz
8. Sensing distance: 0-8mm
9. Support Specifications: Qualified with QI Wireless Protocol Charging
10. Support QC wireless fast charging equipment such as iphone8, iPhone x, iphone8 plus, Samsung S6, sedge, s7, Sedge, s8, s8+,s9+
11. For devices that do not support wireless charging, magnetic fast charging can

Instructions For Use

1. Connect the vehicle’s wireless charging device to the appropriate data cable when using it.
2. Connect the USB port of the data cable to the charging interface on the car(eg, cigarette lighter switching charger and USB charging port on the car
3. The device clip clips the air outlet and can also be placed elsewhere
4. After the device is powered on a 5V-9V DC power supply, it will automatically check the tension, and the red indicator light will be on. When the object is close to the device 5cm-20cm, the automatic induction will open the arms and put the phone into the phone, the device will automatically clamp the phone. At this point, wireless charging will automatically charge the phone, charging blue light (mobile phone with wireless charging function) when you remove the phone you need to touch the back of the shell at the top of the sensing point when the hand touches the sensing point position, the device automatically opens double Arm, remove the phone.
5. This device has over-voltage protection, over-temperature protection, magnetic field protection, short-circuit protection if the device is abnormal, it will automatically stop working

Precautions

1. Do not over-squeeze or hit the device
2. Do not use the wireless charger under severe high temperature, humidity, or corrosive environment to avoid damaging the device’s circuit

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency Exposure Statement for IC This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 10cm between the radiator & body.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 15cm between the radiator & body.

Thank You For Using This Product

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>