StarTech com M2-HDD-DUPLICATOR-N1 NVMe Drive Duplicator Dock User Guide

StarTech com M2-HDD-DUPLICATOR-N1 NVMe Drive Duplicator Dock

Product Information

Specifications

• Product ID: M2-HDD-DUPLICATOR-N1
• Target Drive Bay: 1
• Source Drive Bay: 1
• Mode Selector Switch: Yes
• Mode LED Indicators: Yes
• Progress LED Indicators: Yes
• Drive LEDs: Yes
• Start Button: Yes
• USB-C Host Connection: Yes
• DC Power Input: Yes
• Power Switch: Yes

Product Usage Instructions

Installation

Power the Drive Duplicator Dock

1. Connect the Universal Power Adapter to the appropriate Regional Power Tip.
2. Connect the Universal Power Adapter to the DC Power Input on the rear of the M.2 Drive Duplicator Dock.
3. Toggle the Power Switch to the ON position.

Operation

Connect to a Computer

1. Insert a M.2 NVMe Drive into the Source and/or Target Drive Bay.
2. Press the Mode Selector Button until the PC Mode LED is Solid Green.
3. Connect the included USB-C Cable from the USB-C Port on the rear of the Drive Duplicator Dock to an available USB-C Port on the Host Computer.
4. The Host Computer will automatically detect and install the required Drivers.

Copy a Drive

1. Press the Mode Selector Button until the Duplicator Mode LED is Solid Blue.
2. Ensure the Source and Target Drives are in the correct Drive Bays.
3. Press and Hold the Start Button until the Progress LED Indicators begin to flash. Release and press the Start Button once more.
4. Wait for the duplication process to complete as indicated by the Progress LED Indicators.

Regulatory Compliance

FCC – Part 15
Industry Canada Statement

Warranty Information
This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Contact Information

• StarTech.com Ltd.
  45 Artisans Cres London, Ontario N5V 5E9 Canada

• StarTech.com LLP
  4490 South Hamilton Road Groveport, Ohio 43125 U.S.A.

• StarTech.com Ltd.
  Unit B, Pinnacle 15 Gowerton Rd, Brackmills Northampton NN4 7BW
  United Kingdom

• StarTech.com Ltd.
  Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands

FAQ

Q: What should I do if the Progress LED Indicators do not stop flashing after completing the duplication process?
A: If the Progress LED Indicators continue to flash after completion, power off the Drive Duplicator Dock, remove and re-insert both drives, then restart the duplication process.

Quick-Start Guide

1 to 1 M.2 NVMe Drive Duplicator Dock

Product ID
M2-HDD-DUPLICATOR-N1

Copy to
2| Source Drive Bay| Insert the Source M.2 NVMe Drive to Copy from
3| Mode Selector Switch| Press and Hold to change between PC or Duplicator Mode
4| Mode LED Indicators|

• Solid Green: PC Mode
• Solid Blue: Duplicator Mode

5| Progress LED Indicators| Indicates progress from 25% to 100% during the Duplication process
6| Drive LEDs|

• Solid Blue: Indicates the M.2 Drive is detected
• Flashing Red: There is an error reading the M.2 Drive or the M.2 Drive was removed during duplication
• Solid Purple: Indicates the Target M.2 Drive is too small to duplicate to

7| Start Button|

• Starts the Drive Duplication process
• See Operation section for more information

8| USB-C Host Connection|

• Connect the Drive Duplicator Dock to an available USB-C Port on a Host Computer
• Only required for PC Mode

9| DC Power Input| Connect the included Universal Power Adapter
10| Power Switch| Turn the M.2 Drive Duplicator Dock On or Off

Requirements

For the latest product information, technical specifications, and declarations of conformance, please visit: www.StarTech.com/M2-HDD- DUPLICATOR-N1

Package Contents

• M.2 Drive Duplicator Dock x 1
• 3ft (1m) USB-C to USB-C Cable x 1
• 3ft (1m) USB-A to USB-C Cable x 1
• Universal Power Adapter (NA/UE/UK/ANZ) x 1
• Quick-Start Guide x 1

Installation

Power the Drive Duplicator Dock

1. Connect the Universal Power Adapter to the appropriate Regional Power Tip.
2. Connect the Universal Power Adapter to the DC Power Input, located on the rear of the M.2 Drive Duplicator Dock.
3. Toggle the Power Switch , located on the rear of the M.2 Drive Duplicator Dock, to the ON position.
   Note: The M.2 Drive Duplicator Dock should be powered off before removing or adding drives to the Target/Source Drive Bays.

Operation
Warning! M.2 Drives can become hot during duplication or prolonged data transfer sessions. Avoid touching the M.2 Drives immediately after use to prevent burns or damage. Allow the drives to cool down before removing/handling.

Connect to a Computer

1. Insert a M.2 NVMe Drive into the Source and/or Target Drive Bay.
2. Press the Mode Selector Button until the PC Mode LED is Solid Green.
3. Connect the included USB-C Cable from the USB-C Port, located on the rear of the Drive Duplicator Dock, to an available USB-C Port on the Host Computer.
4. The Host Computer will automatically detect and install the required Drivers.

Copy a Drive

1. Press the Mode Selector Button until the Duplicator Mode LED is Solid Blue.

2. Ensure the Source and Target Drives are in the correct Drive Bays.

3. Press and Hold the Start Button until the Progress LED Indicators begin to flash. Immediately release and press the Start Button once more. The 25% LED will begin to flash to indicate the duplication process is in progress.
   Warning! Do not disconnect either drive or interrupt the process until the duplication process has completed. Doing so may result in damage to the drive or lost data.
   Note: As each 25% segment of the duplication process finishes, the corresponding LED will turn solid, while the subsequent LED will begin to flash

4. When All Progress LED Indicators are no longer flashing and have become solid, the duplication process is complete.

Regulatory Compliance

FCC – Part 15

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Warranty Information

• This product is backed by a two-year warranty.
• For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada

StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.

StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom

StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>