HOOKE ROAD BXG.4024-1 Tacoma Front Bumper Full Steel Bumper LED Lights Instruction Manual

HOOKE ROAD BXG.4024-1 Tacoma Front Bumper Full Steel Bumper LED Lights

Specifications

• Model: BXG.4024-1
• Material: Various (Steel, Nylon)
• Installation Time: About 1.5 hours
• Tools Required: Drive Socket Ratchet Wrench, 16mm & 19mm Wrench, 16mm & 19mm Shallow Socket

Product Usage Instructions

• Step 1: Remove Original Bumper
  Begin by removing the original vehicle front bumper carefully to prepare for installation.

• Step 2: Assemble Left & Right Wings and Main Body
  Use Hex Bolt (M1230), Split Lock Washer (D12), Flat Washer (M1230*2), and Hex Nut (M12) to assemble the components.

• Step 3: Install License Plate Bracket
  Attach the license plate bracket (A1, A2, A3) using M6*20 button head socket cap bolts screws. Then, install it into the bumper with the same screws.

• Step 4: Install Connecting Bracket
  Fix the connecting bracket into the bumper using Hex Bolt (M12110), Split Lock Washer (D12), Flat Washer (M1230*2), and Hex Nut (M12). Do not fully tighten these bolts at this stage.

• Step 5: Install Bumper
  Place the bumper onto your vehicle using the original bolts. Adjust the position as needed before tightening the screws securely.

• Step 6: Install Skid Plate
  Attach the skid plate and skid plate connecting bracket using M8*16 Button Head Socket Cap Bolt Screw groups. Install the skid plate connecting bracket on the bottom.

• Step 7: Finalize Installation
  Once all components are securely attached, your installation is complete. Enjoy your off-road adventures with this Hooke Road product!

Attention

1. The product parts in this instruction may slightly differ from the actual product but should not affect installation.
2. Contact your distributor for any questions regarding your purchase.

Frequently Asked Questions

• Q: How long does it take to install the front bumper?
  Installation time is approximately 1.5 hours, but may vary based on mechanical skill level.

• Q: What tools are required for installation?
  You will need a Drive Socket Ratchet Wrench, 16mm & 19mm Wrench, and 16mm & 19mm Shallow Socket for installation.

MAKE A DIFFERENCE

Tools required:

• Drive Socket Ratchet Wrench;
• 16mm & 19mm Wrench;
• 16mm & 19mm Shallow Socket;

Installation time:

About 1.5 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)

To view the electronic version (BXG.4024-1), please scan the QR code.

Installation instruction:

• Step 1 : Remove the original vehicle front bumper.
• Step 2 : Assemble the left & right wings and the main body with the Hex Bolt (M1230), Split Lock Washer (D12), Flat Washer (M1230*2), Hex Nut (M12).
• Step 3 : Assemble the license plate bracket (A1, A2, A3) with the M620 button head socket cap bolts screw groups. And then install it into the bumper with the M620 button head socket cap bolts screw groups.
• Step 4 : Install the connecting bracket into the bumper with the Hex Bolt (M12110), Split Lock Washer (D12), Flat Washer (M1230*2), Hex Nut (M12). Don’t tighten up those bolts.
• Step 5 : Install the bumper into your vehicle with the original bolts. Tighten the screw after lifting the bumper to adjust the position.
• Step 6 : To install the skid plate & the skid plate connecting bracket. Use the M8*16 Button Head Socket Cap Bolt Screw groups. Install the skid plate connecting bracket in the bottom.
• Step 7 :
  The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Attention

1. The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
2. Please feel free to contact your distributor if you have any kind of question about your purchase.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>