HOOKE ROAD BXG.9807-S 4Runner Rear Hatch Ladder Trunk Tailgate Roof Access Pedal User Manual
- June 1, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD BXG.9807-S 4Runner Rear Hatch Ladder Trunk Tailgate Roof Access Pedal
Contents
-
Ladder Top Step Bracket
-
Ladder Side Profiles (1)
-
Bottom Mount Bracket
-
Inclined Ladder Steps
-
Ladder Side Profiles (2)
-
Right Angle Ladder Steps
-
Bottom Inner Plate
-
Ladder Side Profiles (3)
Parts
| Qty | Part Name | Size(mm) | Picture |
|---|---|---|---|
| 4 | Button Head Socket Cap Bolts Screws | M8*16 |
37| Button Head Socket Cap Bolts Screws| M6*16|
2| Button Head Socket Cap Bolts Screws| M6*20|
4| Flat Washer| M8201.5|
36| Flat Washer| M6121.5|
3| Flat Washer| M6161.5|
20| Flange Hex Lock Nuts| M6| 
4| Flange Hex Lock Nuts| M8|
2| Round Black Rubber Pads| M62610.5|
1| Double Side Tape| |
1| EVA Foam Strips| 308561|
1| Positioning Paper| | 
Tools required
a. Masking Tape;
b. Drive Socket Ratchet Wrench;
c. 10mm, 13mm Wrench;
d. 4mm, 5mm Hex Bit Socket;
e. 4mm, 7mm Drill Bit & Drill;
f. Scissors;
Installation time
About 1 hour, 1-2 people may be needed. Installation time may differ according
to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE
STARTING INSTALLATION!)
To view the electronic version (BXG.9807-S), please scan the QR code.
Installation instruction
Step 1: Open the Rear hatch and remove the left plastic cover as shown.
You can reinstall it after completing the installation.
Step 2: Next, you need to locate the positioning paper in the package and
cut it to the size shown in the diagram using scissors.
Step 3: Next, use the masking tape to secure the positioning paper onto
the vehicle. When placing it, align the solid line beneath the positioning
paper with the curvature of the vehicle body.
Step 4: Next, align the center of the circular hole on the positioning
paper, drill a 4mm pilot hole and open up to 7mm.
Step 5: Next, use double-sided tape to adhere within the green area of
the ladder top step bracket, and attach the EVA to the contact surface between
the bottom mount bracket and the vehicle.
Step 6: Next, slide the bottom inner plate into the door opening and
assemble it with the bottom mounting bracket using M6*16 screws and washers,
as shown in the diagram.
Step 7: Next, assemble the ladder side profiles (1) onto the bottom mount
bracket. There are two holes on each side that require the installation of
round black rubber pads.
Step 8: Next, assemble the ladder side profiles (3) and right angle ladder steps together onto ladder side profiles (1).
Step 9: Next, assemble the ladder side profiles (2) and inclined ladder
steps together onto ladder side profiles (3).
Step 10: Making sure it is level.
Step 11: Finally, use a cloth to clean the surface of the ladder top step
bracket and the vehicle body. Peel off the double-sided tape on the back of
the bracket, then insert the ladder top step bracket bracket into the groove.
After inserting, use a hard object to inset into the groove to prevent the
bracket from moving. Finally, assemble it onto the ladder using M8*16 screws.
Step 12:
The installation is complete. We hope you enjoy a wonderful off-road life with
this quality Hooke Road product!
Attention:
- The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of question about your purchase.
Hooke Road to find your parts.
CUSTOMER SUPPRT
Feel Free To Share Your Vehicle @HookeRoad4x4
With The Hashtag #hookeroad If You” d Like
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>