maXpeedingrods 34902-84 Harley Big Twin Transmission Mainshaft Inner Bearing Race Tool Installer Puller Instructions

maXpeedingrods 34902-84 Harley Big Twin Transmission Mainshaft Inner

Bearing Race Tool Installer Puller

Product Information

This Mainshaft Bearing Inner Installer & Puller Tool Kit is designed for the removal and installation of the main shaft inner bearing race on 5 and 6-speed transmissions.

Specifications

• Bearing Plate
• Harden Tip
• Puller Bar
• Bolt
• Screw
• Extension
• Flat Washer
• Pusher Tube
• Nut

Product Usage Instructions

1. Fix the Harley transmission on the table. Assemble the product ensuring the horseshoe bearing plate is securely positioned behind the bearing race.
2. Set the torque wrench to 40 LBF and attach it to the puller bar. Twist the top of the screw with the torque wrench to pull out the bearing race.
3. Unscrew the arbor, insert the drive spool through the cam housing hole, and screw them together. Insert the arbor into the cam bearing and secure the spool stabilizer in the cam housing hole.
4. Place the bearing race into the main shaft, twist the extension into the main shaft threads, then add the pusher tube and flat washer. Twist on the nut sequentially.
5. Hold the main shaft with one wrench and twist the nut with another wrench to push in the bearing race.
6. Use the horseshoe-bearing plate to ensure correct positioning.

Notes

• If you encounter difficulty inserting the tool behind the bearing race in older transmissions, you can remove the side cover, loosen the nut on the main shaft, put the transmission in neutral, and tap on the main shaft with a soft hammer to adjust its position.
• Before using, apply lubricant to the threaded area for smoother operation and to prolong thread life.

FAQ

Q: Can this tool kit be used for all types of transmissions?

A: This tool kit is specifically designed for use with 5 and 6-speed transmissions. It may not be suitable for other types of transmissions.

PRODUCT INFORMATION

This tool is designed to remove and install the mainshaft inner bearing race on 5 and 6-speed transmissions.

KITS CONTENT

INSTRUCTIONS

1. Fix the harley transmission on the table. Assemble the product as shown, making sure the horseshoe bearing plate is fully secured behind the bearing race.
2. The working load of this tool is about 50 LBF and we can set the torque wrench at 40 LBF. With a wrench clamp on the puller bar, the torque wrench twists the top of the stew. As the torque wrench is twisted, the bearing race is pulled out.
3. Unscrew the arbor, insert the drive spool through the cam housing hole, and screw both together. Insert the arbor into the cam bearing and secure the spool stabilizer in another cam housing hole.
4. Put the bearing race into the main shaft, extension twisted into the main shaft threads, then put on the pusher tube and flat washer, and twist on the nut in turn.
5. One wrench holds the main shaft and another wrench twists the nut. As the nut is twisting, the bearing race is pushed in. Finally, we can use the horseshoe-bearing plate to determine the correct position.

NOTE

1. If you have an older transmission and you can’t get the tool in behind the bearing race. So you can remove the side cover of the transmission, then loosen the nut on the main shaft, put the transmission in neutral, take a soft hammer, and tap on the main shaft.
   • Then you can slide the main shaft over to the right place.
2. Before use, lubricant can be applied to the threaded area to improve the smoothness of use and extend thread life.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>