maXpeedingrods SWB-LINC-0006-LC Adjustable Torque Tie Rods Rear Sway Bar End Links Installation Guide
- June 1, 2024
- MAXPEEDINGRODS
Table of Contents
**maXpeedingrods SWB-LINC-0006-LC Adjustable Torque Tie Rods Rear Sway Bar End Links Installation Guide
**
PRODUCT INFORMATION
These tie rods and sway bar end links will replace your stock rugged parts.
The length-adjustable tie rods help to realign your vehicle.
KIT CONTENTS
1| | 2x Rear Sway Bar End Links
---|---|---
2| | 2x Rear Inner Tie Rods
INSTRUCTIONS
-
Jack the rear end of the vehicle and secure it with jack stands. Remove the rear wheels.
-
Disconnect the tie rod from the knuckle. Disconnect the inner tie rods.
Repeat on the opposite side. -
Install new inner tie rod. Repeat on the opposite side.
-
Disconnect the stock sway bar end links from the sway bar.
-
Install the new sway bar end link. Repeat on the opposite side.
-
Tighten all bolts and nuts down to spec.
-
Put wheels on and lower the vehicle to the ground.
MAINTENANCE
Highly suggest drivers inspect the nuts and bolts for tightness regularly.
All modifications must be installed by qualified personnel and in compliance with your local modification regulations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>