OREiN OL0901430 LED Recessed Spotlight Dimmable User Guide

: June 16, 2024
: OREIN

Table of Contents

OREiN OL0901430 LED Recessed Spotlight Dimmable
Compatible Dimmer Brand and Model List
Installation
REMOVAL
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OREiN OL0901430 LED Recessed Spotlight Dimmable

We appreciate the trust and confidence you have placed in OREiN through the purchase of Recessed Spotlight KD3. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.

Thank you for choosing OREiN.

IMPORTANT

Read carefully before installing fixture. Retain these instructions for future reference.OREiN fixture must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required for safety.

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
TO PREVENT ELECTRICAL SHOCK, POWER SHOULD BE TURNED OFF AT THE FUSE BOX BEFORE INSTALLATION.

SAFETY WARNINGS

Read all product labels and directions.

WARNING – Risk of fire or electric shock. LED Retrofit Kit Installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.

WARNING- Risk of fire or electric shock. Install this kit only in the luminaires that have the construction features and dimensions shown in the photographs and/or drawings and where the input rating of the retrofit kit does not exceed the input rating of the luminaire.

Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
WARNING : To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects. Please examine all parts that are not intended to be replaced by the retrofit kit for damage and replace any damaged parts prior to installation of the retrofit kit.
Replace only with OREIN LED. Visit our website: www. iorein.com.
INSTALLATION SHOULD ONLY BE PERFORMED AFTER POWER TO THE FIXTURE HAS BEEN DISCONNECTED.
THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.
These instructions shall be included on an information sheet packaged with each unit.

Our recessed Spotlights are designed with a complete casing, made of durable and strong insulating material, which equates to reinforced insulation and belongs to Class Il luminaires (No ground wire required).

OREiN-OL0901430-LED-Recessed-Spotlight-Dimmable-fig10

OREiN-OL0901430-LED-Recessed-Spotlight-Dimmable-fig1

Class 2 – This product does not require Earthing
Dimmable with phase cut dimmers
Luminaires not suitable for covering with thermally insulating material.

Compatible Dimmer Brand and Model List

Country| Dimmer

Brand

| Dimmer Modle & Spec| Rated Voltage| Rated Frequency
---|---|---|---|---
Fl| ELKO| 315GLE| ****

230V

| ****

50HZ

FR| Legrand| 067083A 16W05 31 CXM14

{TGEU0001)

Installation

(FOR INTERNAL USE ONLY):

Make sure to turn off the main power.
modult opening in guel. The opening size ed em. Make sure the opening is not larger than the outer flange of the LED module.
Open the cover of the provided cable clamp and insert the supply wires through the preferred strain reliefs in the provided box. (Connect the bare wire to the quick cable terminal “N’ 8″L” hole. It also supports loop in and loop out for which 2 pairs of “N” & “L” holes for connecting spotlights in series. No ground/earth wire required).
Push the spring upward, sufficiently lift the product so that the spring can be inserted into the ceiling.
Check to see if the product’s exterior surface is installed on the ceiling so that there is no gap between them.
Turn the power switch back on to verify that the product is working properly.

REMOVAL

Make sure to turn off the main power.
Simply pull down firmly on LED module until mousetrap springs release from the ceiling. Reach through the ceiling to hold mousetrap springs up and away from the ceiling as you continue to pull the module from its opening.

Disconnect wiring.

WARNING

Disconnect the Unit before replacing the Lamp.

Correct Disposal of this product

|

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems orcontact the retailer where the product was purchased. They can take this product for environmental safe recycling.

SYVIO TECHNOLOGY CO., LIMITED