HOOKE ROAD MMR.10028-1 Tailgate Storage Lock Box Tailgate Table Organizer Instruction Manual

HOOKE ROAD MMR.10028-1 Tailgate Storage Lock Box Tailgate Table Organizer

Product Specifications

• Model: MMR.10028-1
• Contents:
  • 4 Button Head Socket Cap Bolts Screws M6*25
  • 4 Button Head Socket Cap Bolts Screws M6*20
  • 8 Flat Washer 4 Flange Hex Lock Nuts 4 Rivet Nut 1 Key
• Tools required:
  • a. 10mm Wrench
  • b. 10mm Shallow Socket
  • c. 4mm Hex Bit Socket
  • d. 9.2-9.5mm Drill Bit & 6mm Rivet Nut Tool
  • e. Electrical Drill
• Installation time: About 1 hour, 2-3 people may be needed.

Product Usage Instructions

1. Step 1: Open the tailgate in preparation for installing the product.
2. Step 2: Unpack the product and take out the positioning paper from the package. Place the positioning paper about 11.8 cm from the leftmost side and fix it with adhesive paper.
3. Step 3: Use a 9.2-9.5 mm drill bit to drill the four holes marked on the positioning paper. Use a 6mm rivet nut tool to drive into the Rivet Nut.
4. Step 4: Install the bracket into the previously drilled hole and secure it with M6*25 screws.
5. Step 5: Lift the storage box and install it on the brackets using M6*20 screws.
6. Step 6: If you need to use a net, you can insert the hooks into the internal circular holes.
7. Step 7: The installation is complete. Enjoy a wonderful off-road life with this quality Hooke Road product!

Attention

1. The product parts in this instruction may differ slightly from the actual product contents but generally do not affect the installation of the product.
2. Please feel free to contact your distributor if you have any questions about your purchase.

Frequently Asked Questions (FAQ)

• Q: How do I ensure I have all the necessary parts before starting installation?
  A: Before starting installation, carefully check that you have all the parts listed in the contents section of the manual to avoid any issues during installation.

• Q: Can this product be installed by one person?
  A: While it is recommended to have 2-3 people for installation, a single person with sufficient mechanical skills can also complete the installation process.

Tailgate Table Storage Lock Box
MMR.10028-1

Contents

Tools required

• 10mm Wrench;
• 10mm Shallow Socket;
• 4mm Hex Bit Socket;
• 9.2-9.5mm Drill Bit & 6mm Rivet Nut Tool;
• Electrical Drill;

Installation time

About 1 hour, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (MMR.10028-1), please scan the QR code.

Installation Instruction:

• Step 1 : Open the tailgate in preparation for installing our product.
• Step 2: Unpack the product, take out the positioning paper from the package, place the positioning paper about 11.8 cm from the leftmost side, and then fix it with adhesive paper.
• Step 3 : First use an 9.2-9.5 mm drill bit to drill the four holes marked on the positioning paper, and use a 6mm rivet nut tool to drive into the Rivet Nut.
• Step 4: Install the bracket into the previously drilled hole and secure it with M6*25 screws.
• Step 5 : Lift the storage box and install it on the brackets using M6*20 screws.
• Step 6: If you need to use a net, you can insert the hooks into the internal circular holes.
• Step 7 :
  The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Attention

1. The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
2. Please feel free to contact your distributor if you have any kind of question about your purchase.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>